EN 10250-4:2021 IS 2002: 2009 IS 1030:1998 IS 7452: 2013 IS 1239 (Pt 1):2004 IS 1239 (Pt 2):2011 IS 1875:1992 (R2014) IS 1570:1987 IS 4923: 1997 IS 1732:1989 (R2014) IS 2062 :2011 (R2016) IS 7887:1992 (R2012) IS 10748 :2004 (R2014) ASME SEC II Part A & B-2021 ASTM A 516;2017 NACE MR 0175:2021 / ISO 15156-1,2 &3: 2020 ASME IX-2021/ PD 190 DIN C 45/AISI 1045
Open steel die forgings for general engineering purposes. Stainless steels Steel plate for pressure vessel for intermediate and high temperature service including boilers Carbon steel castings for general engineering purposes - specification Hot trolled steel sections for doors, windows, and ventilators specification Steel Tubes, Pipes and Fittings Steel Tubes, Pipes and Fittings Carbon steel billets, blooms, slabs, and bars for forgings Schedules for Wrought Steels, Part 2: Carbon Steels (Unalloyed Steels), Section 2: Carbon Steel Wires with Related properties Hollow steel sections for structural use Steel bars, round and square for structural and general engineering purposes dimensions Hot Rolled Medium and High Tensile. Structural Steel Mild steel wire rod for general engineering purposes specification Specification of Hot Rolled Carbon Steel Skelp & Strips for manufacture of steel tubes & pipes Ferrous & Nonferrous Material Specifications Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate and Lower-Temperature Service Sulphide Stress Corrosion Cracking Resistant Metallic Material for oil field equipment
Welding, Brazing, and Fusing Qualifications.
Pipe Fittings
Stage wise / Finished Product Inspection
ASTM A 234;2019 ASTM A 182;2022
Stainless steel round rods Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service
IS 436 Part-1:Sec 1)-1964
Methods for Sampling of Coal
ASTM A 420;2020
Specification for Forged or Rolled Alloy-Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High- Temperature Service
ASTM A 403;2022 ASTM A 758;2019
ASTM A 774;2019
Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service
Specification for Wrought Austenitic Stainless Steel Piping Fittings
Specification for Wrought- Carbon Steel Butt-Welding Piping Fittings with Improved Notch Toughness
Specification for As- Welded Wrought Austenitic Stainless-steel Fittings for General Corrosive Service at Low and Moderate Temperatures
Tubes
Stage wise / Finished Product Inspection
IS 1161:2014
Steel Tubes for Structural Purposes - Specification
IS 3601:2006
Steel Tubes for Mechanical and General Engineering Purposes
ASTM A 178;2019 ASTM A 179;2019
Specification for Electric- Resistance-Welded Carbon Steel and Carbon- Manganese Steel Boiler and Super heater Tubes
ASTM A 192;2017
ASTM A 192;2017 ASTM A 209;2022
Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes
ASTM A 213;2022 ASTM A 214;2019
Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service
ASTM A 249;2018
Specification for Seamless Carbon-Molybdenum Alloy- Steel Boiler and Super heater Tubes
API 5CT, 2011 Add.2021 EN 10255, 2004
Specification for Seamless Ferritic and Austenitic Alloy- Steel Boiler, Super heater, and Heat-Exchanger Tubes
Specification for Electric- Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes
Specification for Welded Austenitic Steel Boiler, Super heater, Heat- Exchanger, and CondenserTubes
Specification for Casing and Tubing
Non-alloy steel tubes suitable for welding and threading. Technical delivery conditions
Castings
Stage wise / Finished Product Inspection
IS 1030:1998
Carbon steel castings for general engineering purposes - specification
IS 2644:1994 (R2005) IS 1865:1991 (R2005)
High strength steel castings for general engineering and structural purposes specification
ASTM A 915;2018
ASTM A 958;2017
Iron Castings with Spheroidal or Nodular Graphite -Specification
ASTM A 781;2021
Steel Castings, Carbon and Alloy, Chemical Requirements Similar to Standard Wrought Grades
Steel Castings, Carbon and Alloy, with Tensile Requirements, chemical Requirements Similar to Standard Wrought Grades
Standard Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use
Standard Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use
IAF Scope 17b Fabricated metal products
Bullets, Pressurized and non-pressurized vessels, Piping &Piping Skid
Stage wise / Finished Product Inspection
IS 2825: 1969 (R2002) ASME Sec VIII-2015
Code for Unfired pressure vessels
IS 2825:1969 (R2002)
Rules for construction of Pressure Vessels
Code For Unfired Pressure Vessels
Tanks
Stage wise / Finished Product Inspection
IS 10987: 1992 (R2003)
Code of fabrication, Practice for design, testing and installation, of under- ground /above-ground horizontal
cylindrical steel storage tanks for petroleum products
API 650- 13thEdition, Includes Errata 1 (2021)
Design and construction of Large, Welded, Low- Pressure Storage Tanks
ASME Sec VIII 2021
ASME Sec II, 2021 (A, B,C,D)
Welded tanks for oil storage
Rules for construction of pressure vessels
Materials & Specifications
Gas Cylinders
Stage wise / Finished Product Inspection
ISO 9809-2019 ISO 11439-2013
Refillable seamless steel gas cylinders design, construction, and testing
ISO 4706-2008
High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles
Gas cylinders – Refillable welded steel cylinders
Columns
Stage wise / Finished Product Inspection
ASME SEC VIII 2021
Rules for construction of pressure vessels
Heat Exchangers
Stage wise / Finished Product Inspection
IS 4503: 1967 (R2003) TEMA, 2019
Specification for shell and tube type heat exchangers
The Tubular Exchanger Manufacturers Association
Customer Requirements in the form of QAP & scope mentioned in IAF Scope mentioned under this scope in the certificate, However the applicable National & International Codes and Standards shall be among those which are either referred in the scope statement or shall be equivalent to the standards described above forthe relevant scope category
IAF Scope 18 Machinery and Equipment Materials and components associated with above products, Machinery and Machine Tools, Blowers, Dryers, Fans, HVAC systems Valves
Stage wise / Finished Product Inspection
API 614: 2022, 6th Edition
Lube Oil System Lubrication, Shaft- sealing and Oil- control Systems and Auxiliaries, (ISO 10438: 2008, Modified), Includes Errata (2008)
IAF Scope 18 Machinery and Equipment Materials and components associated with above products, Machinery and Machine Tools, Blowers, Dryers, Fans, HVAC systems Valves
Stage wise / Finished Product Inspection
API 614: 2022, 6th Edition
Lube Oil System Lubrication, Shaft- sealing and Oil- control Systems and Auxiliaries, (ISO 10438: 2008, Modified), Includes Errata (2008)
API 598:2016
IS 9890: 1981 (R2003)
EN 12266-1 -2018
Valve inspection and testing, Tenth Edition
API 600, 2015
Specification for general purpose ball valves
ASME B16.34, 2020
Testing of metallic valves
Bolted bonnet steel gate valves for petroleum and natural gas industries
Compact Steel Gate Valves- Flanged, Threaded, Welding, and Extended- Body Ends
Valves - Flanged, Threaded, and Welding End
Bearings
IS 13962, 1994(R1999) API 670, 2014
Rolling bearings – metric tapered roller bearings – designation System
Axial Fans, Blowers, Dryers
IS 4894: 1987
Machinery Protection Systems Specification for - centrifugal fans
Customer Requirements in the form of QAP & scope mentioned in IAF Scope mentioned under this scope in the certificate, However the applicable National & International Codes and Standards shall be among those which are either referred in the scope statement or shall be equivalent to the standards described above for the relevant scope category
IAF Scope 19 Electrical Machinery and Apparatus Electric Motors
Stage wise / Finished Product Inspection
IS 12615: 2018 IS 60034, 2022
Energy efficient Induction Motors-Three-phase Squirrel cage
Transformers
IS 11171-1985
Rotating electrical machines Dry type power transformers
IS 2026 Part 1 to 4, 2011
Power transformers
IS 2705 Part 1 to 4, 1992
Power transformers
IS 3156 Part 1 to 4, 1992
Current transformers
IEC 60076, 2020
Voltage transformers
Power transformers
MCC, Junction Boxes, ControlPanels, Switch Gears Manufacture of electricity distribution andcontrol apparatus e.g. Switchgear (HT/LT), Panels, PCC, MCC, APFC VFD, CT, PT, Flame proof & Weather proof equipment’s, Junction Boxes, Insulated Wire and Cables, Lighting, equipment’s, Push Button Stations and Electrical lamps, Outdoor units and IPMS for Telecom sector, Pressure Gauges, earthing, electrical resistance, Flameproof enclosure, luminaries and electrical installation classification etc.
IS 13947-1: 1993 (R2004)
Low Voltage Switch Gear and Control Gear
IS 8623-1: 1993
IS 12729: 2004
Low-Voltage Switchgear and Control Gear Assemblies, Part 1: Requirements for Type- Tested and Partially Type- Tested Assemblies
IEC 61439-2, 2020
Common High-Voltage Switchgear and Control gear Standards
IEC 62790, 2020
IEC 61439-1, 2020
Low-voltage switchgear and control gear assemblies
IS 13947-5: 2004
Junction boxes for photovoltaic modules - Safety requirements and tests
IS 9921: 1985
Low-voltage switchgear andcontrol gear assemblies - Part1: General rules
IEC 62271, 2022
IS 8623-1: 1993
Low-Voltage Switchgear and Control gear, Part 5: Control Circuit Devices and Switching Elements, Section 2: Proximity Switches [ETD 7: Low Voltage
IEC 60947 -2022
Alternating Current Disconnectors (isolators) and Earthing Switches for Voltages
IS 7987 -1985
High-voltage switchgear and control gear
IS 2071-2:1974 (R2006)
EN 837 -1998
Low-Voltage Switchgear and Control gear Assemblies, Part 1: Requirements for Type-Tested and Partially Type- Tested Assemblies
IS 10322-1: 2014
IS 10322-5 (2012)
High-voltage switchgear and control gear - Part 100: High voltage alternating-currentcircuit-breakers
Low-Voltage Switchgear and. Control gear
Guide For Selection of High Voltage Ac Circuit Breakers
Methods Of High Voltage Testing
Stainless steel diaphragm pressure gauges
Luminaries Part 1 General Requirements and Tests
Luminaries Part 1 Particular Requirements
Manufacture of accumulators, primary cells and primary batteries like (UPS, Battery, Battery chargers etc.)
IS 1651:1991 (R2002)
Specification for stationary cellsand batteries, lead-acid typewith tubular positive plates
IS 10918:1984 (R2013)
IS 13314-1992 (R2003)
Specification For Vented Type Nickel Cadmium Batteries
NFPA 72-2022
IEC 60584-3: 2021
Solid state inverters run from storage Batteries
National Fire Alarm and Signaling Code
Thermocouple Extension & Compensating Cable
Manufacture of industrial process control equipment e.g. (PLC, DCS, CCTV, Fire & Gas detection system etc.)
IS 11360: 1985
Specification for Smoke Detectors for Use in Automatic Electrical Fire Alarm System
ASME Sec V:2021 Article 10 ASME Sec. VIII Div1:2021 UG 100
Gas Turbine Flowmeter for Gas Supply Industries
IAF Scope 26 B(i) Gas Supply City Gas Distribution
Stage-wise
PNGRB's GSR 612(E) dated 27.08.2008 along with the latest amendments, national/ international standards mentioned therein, and relevant statutes
PNGRB's "Technical Standards and Specifications including Safety Standards for City or Local Natural Gas Distribution Network" Regulations, 2008
IAF Scope 27 Water Supply Steam and Hot Water supply Collection, purification, and distribution systems
Stage wise / Finished Product Inspection
Central Public Health and Environmental Engineering Organization. (CPHEEO) 3rdEdition May’1999
Manual on Water Supply & Treatment
Steam and hot water supply
IS 458: 2003
Precast Concrete Pipes (With and Without Reinforcement - Specification
IAF Scope 31a LPG Over ground/ Mounded Storage and Bottling Facilities with item 31a (v) of NABCB Sub-sector categorization document BCB 503(O&G)
In-service
PNGRB’s F.No. PNGRB/Tech/6-T4SLPG/(1)/2019, the year 2019 along with the latest amendments, national/ international standards mentioned therein, and relevant statutes
PNGRB “Technical Standards and Specifications including Safety Standards for LPG Storage, Handling & Bottling Facilities” Regulations
IAF Scope 34 Emergency Response & Disaster Management Plan (ERDMP) with item 34(ii) NABCB Sub-sector categorization document BCB 503(O&G): Midstream and Downstream areas ('a' to 'i') as applicable under item-3 of ERDMP Regulation
In-service
GSR 39(E) 18/01/2010 along with latest amendments, national/ international standards mentioned therein, and relevant statutes
PNGRB’s Codes of Practices for Emergency Response and Disaster Management Plan
(ERDMP) Regulations -2010
The following offices of Santane Consultants Pvt. Ltd. are included under accreditation
