Positive Displacement Pumps-Controlled Volume For Petroleum, Chemical, And Gas Industry Services,
IS 5120:1977
Technical Requirements For Rotodynamic Special Purpose Pumps
API 610 12th Edition 2021
Centrifugal Pumps For Petroleum, Petrochemical And Natural Gas Industries
API 6D, Twenty-Fourth Edition August 2014
Specification For Pipeline and piping Valves
IS 6595:Part-1:2018
Horizontal Centrifugal Pumps For Clear, Cold Water, Agriculture and rural water supply
IS 11745:1986
Technical Supply Conditions For Positive Displacement Pumps-Reciprocating
IS 5120: 1977
Technical Requirements For Roto Dynamic Special Purpose Pumps
Piping, Pipe Structural, Pipe Spools, Pipe Racks Spring Hangers
Stage-Wise/ Final Inspection
ASME B 31.3, 2020, AWS D1.3 2018, AWS D1.1 2020, ASME Sec VIII Div 1 2021, ASME Sec IX 2021 ASME Sec V 2021
Process Piping Structural Welding Code - sheet steel Structural Welding Code - steel Rules For Construction Of Pressure Vesselsspecifies the requirements for the qualification of welders and the welding procedure specificationsNondestructive Examination
Power Transformer- Part 1: General Power Transformer- Part 2: Temperature Rise Power Transformer- Part 3: Insulation Levels, Dielectric Tests And External Clearances In Air
IEC 60076-4:2002,IEC 60076-5 Third Edition 2006-02,IS 11171:1985 (R2011).
Power Transformer- Part 4: Lightning impulse and switching impulse testing.Power Transformer -Part 5: Ability To Withstand Short circuit.Dry type Transformer
Instrument Transformer
Stage-Wise/ Final Inspection
IS 2705 -1:1992 IS 2705 -2:1992 IS 2705 -3:1992 IS 2705-4:1992 IEC: 61869-2/2012 IS 3156 -1:1992 IS 3156 -2:1992IS 3156-3:1992 IS 3156 -4:1992
Current Transformers - Part 1: General Requirements Part 2: Measuring Part 3: Protective Current Part 4: Protective special purpose applications.Instrument transformers - Part 2: Additional requirements for current transformers.Voltage Transformers -SpecificationPart 1: General RequirementsPart 2: Measuring Voltage TransformersPart 3: Protective Voltage TransformersPart 4: Capacitor Voltage Transformers
IEC: 61869-3:2011
Instrument transformers - Part 3: Additional requirements for inductive voltage transformers.
AC Generators
Stage-Wise/ Final Inspection
IS13364:1:1992 IS13364-2 :1992 IEC 60034:1:2017
AC Generators driven by reciprocating internal combustion engines-specification Part 1: Alternators rated upto 20 KVAPart 2: Alternators rated above 20 KVA and upto 1250 KVA.Rotating electrical machines. Part 1: Rating and performance
HT & LT Motors
Stage-Wise/ Final Inspection
IEC 60034:2:1: 2014 IS 12615:2018 IS 7538:1996
Rotating electrical machines - Part 2-1: Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles).Energy efficient Induction Motors-Three-phase Squirrel cage.Three-phase squirrel cage induction motors for centrifugal pumps for agricultural applications
Power Cables
Stage-Wise/ Final Inspection
IEC 60840:2011 IS 7098:Part-1:1988 IS 7098: Part: 2:2011 IS 7098: Part: 3:1993 IEC 60502: Part: 1:2004
Power cables with extruded insulation and their accessories for rated voltages above 30 kV (Um = 36 KV) up to 150 kV (Um = 170 kV) -Test methods and requirements.
Specification for cross linked polyethylene insulated PVC sheathed cables
Part 1: for working voltages up to and including 1100 Volts
Cross linked polyethylene insulated thermoplastic sheathed cables
Part 2: for working voltages from 3.3 KV up to and including 33 KV
Cross linked polyethylene insulated thermoplastic sheathed cables
Part 3: for working voltages from 66 KV to 220 KV.
Power cables with extruded insulation
and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) .
Part 1:Cables for rated voltages of 1 kV ((Um = 1,2 kV) and 3 kV (Um = 3,6 kV)
Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV)
BS 6622:2007
Part 2: Cables for rated voltages from 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV)Electric cables: Armoured cables with thermosetting insulation for rated voltages from 3.8/6.6 kV to 19/33 kV. Requirements and test methods
Control Cables
Stage-Wise/ Final Inspection
IEC 60502: Part: 2:2014 BS 5467:2008 IS 694:2010 IS1554:Part:1:1988 IS1554:Part-2:1988
Electric cables. Thermosetting insulated, armoured cables for voltages of 600/1000 V and 1900/3300 V
Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 450/750V
Specification for PVC insulated (Heavy Duty) Electric Cables.
Part 1: for working voltages up to and including 1100 Volts
Part 2: for working voltages from 3.3 KV up to and including 11 KV
Polyvinyl chloride insulated cables of rated voltages up to and including
Accumulators, Primary Cells & Batteries
Stage-Wise/ Final Inspection
IS 1652:2013 IS 10918:2003
Specification for stationary cells and Lead acid batteries Vented type nickel cadmium batteries.
Battery Chargers, Inverters, Converters
Stage-Wise/ Final Inspection
EN 50091-1-2:1998 IS 13314:1992 IS 3895:1966 IS 4540:1968
Uninterruptible Power Systems (ups) - General and Safety Requirements for Ups Used In Restricted Access Locations.
Solid state inverters run from storage Batteries
Solid state inverters run from storage Batteries
Specification for mono crystalline semiconductor rectifier cells and stacks.
Specification for mono crystalline semi- conductor rectifier assemblies and equipments.
Industrial Process Control Equipment, PLC, DCS, SCADA, CCTV
Stage-Wise/ Final Inspection
IEC 61131:2013 IEC 61511:2018 IEEE 472:1974
Programmable controllersFunctional safety of instrumented system for process industry Electrical surge protection
IS 13432: Part:1: 1992 Reaffirmed 2013
Gas leak detector for use with low pressure Liquefied petroleum Gas burning appliances
Lighting Fixtures And Panels
Stage-Wise/ Final Inspection
IS 10322: Part 1:2014
IS 10322: Part 5:Sec 1:2012
IS 10322: Part:5 Sec 4: 1987
IS 10322: Part: 5: sec 5:1987
IS: 10322:Part 5 Sec 3: 2012
Specification for Luminaires
Part 1: General Requirements
Part 5:Particular Requirements
Section 1: Fixed General Purpose Luminaires
Section 4: Portable General Purpose Luminaires
Section 5: Flood Lights
Section 3: Luminaires for Road and Street Lighting.
LT MCC And PCC Control Panels>
Final Inspection
IS13947: Part:1:2004 IEC 60947:1:2007
Specification For Low-Voltage Switchgear And Controlgear - Part 1: General Rules.
Specification For Low-Voltage Switchgear And Controlgear - Part 1: General Rules.
Customer Requirements in the form of Project Specification, Datasheet, Drawings and QAP as per the applicable National & International Codes and Standards as mentioned above or equivalent to the standards described above.
Circuit Breakers
Final Inspection
IEC 62271-100/2008 IEC 61633/1995
High-voltage switchgear and control gear -Part 100: Alternating current circuit-breakers.
High-voltage alternating current circuit-breakers - Guide for short-circuit and switching test procedures for metal-enclosed and dead tank circuit-breakers.
Customer Requirements in the form of Project Specification, Datasheet, Drawings and QAP as per the applicable National & International Codes and Standards as mentioned above or equivalent to the standards described above.
Switch Gear Including Electricity Distribution And Control Apparatu
Final Inspection
IS 12729:2004
IEC 62271-1/2007
IEC 60694 /2002
Common Specification for High Voltage Switchgear and control gear standards High Voltage Switchgear and control gear Part 1: Common SpecificationsCommon Specification for High Voltage Switchgear and control gear standards.Customer Requirements in the form of Project Specification, Datasheet,
Drawings and QAP as per the applicable National & International Codes and Standards as mentioned above or equivalent to the standards described above.
Junction Boxes
Final Inspection:
GB 4208:2008 IEC 60529:2013
Degrees of protection provided by enclosure (IP code)Degrees of protection provided by enclosures (IP Code)Customer Requirements in the form of Project Specification, Datasheet, Drawings and QAP as per the applicable National & International Codes and Standards as mentioned above or equivalent to the standards described above.
Lightning Arrestor / Surge Arrestor>
Final Inspection:
IS 15086:Part 1:2001
IEC 60099:1:1991
IEC 60099:5:2013
IS 3070:3:1993
Part 1: Non linear resistor type gapped surge arrestors for a.c systems
Part 1:Non-linear resistor type gapped surge arrestors for a.c. systems
Part 5: Selection and application recommendations.
Lighting arresters for AC system.
Part 3:Metal oxide lighting arrestors without gap
AC Dis-Connectors (Isolators) & Earthing
Final Inspection
IS 9921:Part 1:1981
IS 9921:Part 2:1982
IS 9921:Part 4:1985
IEC 62271:102:2018
Alternating current dis-connectors (isolators) and earthing switches for voltages above 1000v.
Part 1: General and Definitions
Part 2: Rating Alternating current dis-connectors (isolators) and earthing switches for voltages above 1000v.
Part 4: Type tests and routine tests
High-voltage switchgear and controlgear -
Part 102: Alternating current disconnectors and earthing switches.
Porcelain And Polymer Insulators
Final Inspection
IS 8603:2008
IS 2099:1986
IS 3347:Part1:Sec 2:1979
Dimensions for porcelain transformer bushings for use in heavily polluted atmospheres 12/17.5 KV,24 KV and 36 KV.
Specification for bushings for alternating voltages above 1000 V
Dimensions for porcelain transformer bushings for use in normal and lightly polluted atmospheres
Part 1: up to and including 1 KV; Section 2: Metal Parts
IS 3347:Part 2:Sec 1:1979
IS 3347:Part 5:Sec 1:1979
IS 5621:1980
IEC 60137:2017
Dimensions for porcelain transformer bushings for use in lightly polluted atmospheres
Part 2: 3.6 KV bushings; Section 1: Porcelain Parts
Dimensions for porcelain transformer bushings for use in normal and lightly polluted atmosphere
Part 5: 36 KV bushings; Section 2: Metal Parts
Specification for hollow insulators for use in electrical equipment
Insulated bushings for alternating voltages above 1 000 V
Bus Ducts
Final Inspection Test reports.Review of type test reports.
IS 8623:Part 1:1993
IS 8623:Part 3:1993
Specifications for low voltage Switchgear & control gear assemblies-
Part1-Requirements for type tested and partially type tested assembliesPart3-Perticular requirements for equipment's where unskilled person have access for their use
Solar Cells, Solar Pv Modules And Solar Panels
Stage Wise/ / Final Inspection
IEC 61730-1: 2007
Photovoltaic (PV) module safety qualification - Part 1: Requirements for construction
IAF Scope 19 BPrecision equipment
Transmitters- Level, Pressure, Radar
MTC Review and Examination Welding Inspection FAT Test
ISO 4126:Part 5:2013
Safety devices for protection against excessive pressure - Part 5: Controlled safety pressure relief systems (CSPRS)
