Specification
for carbon steel Forgings for piping application
ASME
SA 182:2023
Specification
for forged or rolled alloy and stainless-steel pipe flanges, forged fittings,
and valves and parts for high-temperature service
ASME
SA 350:2023
Specification
for carbon and low alloy steel forgings, requiring notch toughness testing
for piping components
BS
EN 10250-1:2022
Open
die steel forgings for general engineering purposes - Part 1: General
requirements
ASME
SA 965:2023
Specification
for steel forgings, austenitic, for pressure and high temperature parts
SA
336:2019
Alloy
Steel Forgings for Pressure and High-Temperature Parts
Castings
Stagewise/
Final inspection
ASME
SA 216:2023
Specification
for Steel Castings, carbon, suitable for fusion welding for high temperature
service
ASME
SA 217:2023
Specification
for steel castings, martensitic stainless and alloy, for pressure-containing
parts, suitable for high-temperature service
ASME
SA 352:2023
Specification
for steel castings, ferritic and martensitic, for pressure containing parts,
suitable for low temperature service
BS
EN 10293:2015
Steel
castings. Steel castings for general engineering uses
Pipes
and Tubes
Stagewise/
Final inspection
ASME
SA 106:2023
Specification
for seamless carbon steel pipe for high temperature service
ASME
SA 179:2023
Specification
for seamless cold drawn low carbon steel heat exchanger and condenser tubes
ASME
SA 213:2023
Specification
for seamless ferritic and austenitic alloy steel boiler,
BS
EN 10217-1:2019
Welded
steel tubes for pressure purposes. Technical delivery conditions Electric
welded and submerged arc welded non-alloy steel tubes with specified room
temperature properties
ASME
SA 214:2023
Specification
for electric resistance welded carbon steel heat exchanger and condenser
tubes
ASME
SA 250:2023
Specification
for electric resistance welded ferritic alloy steel boiler and super heater
tubes
ASME
SA 312:2023
Specification
for seamless, welded, and heavily cold worked austenitic stainless-steel
pipes
ASME
SA 333:2023
Specification
for seamless and welded steel pipe for low temperature service
ASME
SA 334:2023
Specification
foe seamless and welded carbon and alloy steel tubes for low temperature
service
ASME
SA 672:2023
Specification
for electric fusion welded steel pipe for high pressure service at moderate
temperature
IS
1239 P1:2004
(RA
2019) +Amendments
Steel
tubes, tubulars and other wrought steel fittings - Specification: Part 1
steel tubes (Sixth Revision)
IS
3589:2001
(RA
2022)
+Amendments
Steel
pipes for water and sewage (168.3 To 2540 Mm Outside Diameter) -
Specification (Third Revision)
ASME
SA 758:2023
Specification
for Wrought-Carbon Steel Butt-Welding Piping Fittings with Improved Notch
Toughness
ASME
SA 774:2023
Specification
for As Welded Wrought Austenitic Stainless-Steel Fittings for General
Corrosive Service at Low and Moderate Temperatures
IS
1161:2014
(RA 2019)
+Amendments
Steel
tubes for structural purposes - Specification (Fifth Revision)
IS
3601:2006
(RA 2022)
+Amendments
Steel
tubes for mechanical and general engineering purposes - Specification (Second
Revision)
ASME
SA 178:2023
Specification
for Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler
and Super heater Tubes
ASME
SA 179:2023
Specification
for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes
ASME
SA 192:2023
Specification
for Seamless Carbon Steel Boiler Tubes for High-Pressure Service
ASME
SA 209:2023
Specification
for Seamless Carbon-Molybdenum Alloy-Steel Boiler and Super heater Tubes
ASME
SA 213:2023
Specification
for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Super heater, and
Heat-Exchanger Tubes
ASME
SA 214:2023
Specification
for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser
Tubes
ASME
SA 249:2023
Specification
for Welded Austenitic Steel Boiler, Super heater, Heat-Exchanger and
Condenser Tubes
API
5CT 11th Edition 2023
Specification
for Casing and Tubing
API
5DP 2nd Edition 2020
Specification
for Drill Pipe
DIN
EN 10255:2004 +A1 2007
Non-alloy
steel tubes suitable for welding and threading-Technical delivery conditions
BS
EN 10219-1:2006
Cold
formed welded structural hollow sections of non-alloy and fine grain steels
Technical delivery requirements
BS
EN 10219-3:2020
Cold
formed welded steel structural hollow sections Technical delivery conditions
for high strength and weather resistant steels
Tubing
(Non-Ferrous)
Stagewise/
Final inspection
ASME
SB 111:2023
Specification
for Copper and Copper alloy seamless condenser tubes and ferrule stock
ASME
SB 135:2023
Specification
for seamless brass tubes
ASME
SB 161:2023
Specification
for nickel seamless pipe and tube
ASME
SB 163:2023
Specification
for seamless nickel and nickel alloy condenser and heat exchangers tubes
ASME
SB 165:2023
Specification
for nickel-copper alloy seamless pipe and tubes specification for copper and
copper alloy
BS
2871-1:1972
Specification
for copper and copper alloys. Tubes. Copper tubes for water, gas and sanitation
Plate
Stagewise/
Final inspection
ASME
SA 516:2023
Specification
for pressure vessel plates, carbon steel, for moderate and lower temperature
service
ASME
SA 515:2023
Specification
for pressure vessel plates, carbon steel, for intermediate and higher
temperature service
ASME
SA 285:2023
Specification
for pressure vessel plates, carbon steel, low alloy, and intermediate tensile
strength
ASME
SA 387:2023
Specification
for pressure vessel plates, alloy steel, chromium molybdenum
IS
2041: 2009
(RA
2024)
Steel
plates for pressure vessels used at moderate and low temperature -
Specification (Third Revision)
IS
2002:2009
(RA
2024) +Amendment
Steel
plate for pressure vessel for intermediate and high temperature service
including boilers (Third Revision)
IS
2062 : 2011
(RA
2021) +Amendment
Hot
rolled medium and high tensile structural steel - Specification (Seventh
Revision)
BS
EN 10025-2:2019
Hot
rolled products of structural steels Technical delivery conditions for
non-alloy structural steels
BS
EN 10025-1:2004
Hot
rolled products of structural steels General technical delivery conditions
Fasteners
(Carbon
Steel/ Alloy
Steel)
Stagewise/
Final inspection
ASME
SA 193: 2023
Specification
for alloy steel and stainless-steel bolting materials for high temperature or
high-pressure service and other special purpose applications.
ASME
SA 194:2023
Specification
for carbon and alloy steel nuts for bolts for high pressure or high
temperature service or both
ASME
SA 320:2023
Specification
for alloy steel and stainless-steel bolting for low temperature service
ASME
SA 540:2023
Specification
for alloy steel bolting for special application
IS
1367 (Part 13) : 2020
ISO 10684:2004
Technical
Supply Conditions for Threaded Steel Fasteners Part 13 Hot Dip Galvanized
Coatings on Threaded Fasteners ( Third Revision )
IS
4000: 1992
(RA
2022)
High
strength bolts in steel structures - Code of practice (First Revision)
Reinforcement
Rods
Stagewise/
Final inspection
IS
1786:2008
(RA
2023)
+Amendments
High
strength deformed steel bars and wires for concretere inforcement -
Specification (Fourth Revision)
Galvanized
Steel Sheet
Stagewise/
Final inspection
IS
277:2018
(RA
2022) +Amendments
Galvanized
steel strips and sheets (Plain And Corrugated) - Specification (Seventh
Revision)
Steel
Wire
Stagewise/
Final inspection
IS
1835:1976
(RA
2022) +Amendments
Specification
for round steel wire for ropes (Third Revision)
Tool/Dies
Stagewise/
Final inspection
IS
3748:2022
Tool
Steels - Specification
Fittings
Stagewise/
Final inspection
ASME
SA 234:2023
Specification
for pipe fittings of wrought carbon steel and alloy steel for moderate and
high temperature service
ASME
SA 420:2023
Specification
for piping fittings of wrought carbon steel and alloy steel for low
temperature service
ASME
SA 403:2023
Specification
for Wrought Austenitic Stainless-Steel Piping
Fittings
Client
Requirements in the form of QAP mentioning required specification and scope
mentioned in this scope. However, the applicable National & International
Codes and Standards shall be among those which are either referred in the
scope statement or shall be equivalent to the standards described above for
the relevant scope category
IAF
Scope 17 Fabricated Metal Products
Pressure
Vessel
Design
Appraisal, Stagewise/
Final inspection
ASME Code
Sec VIII Division-1:2023
BPVC
Section VIII-Rules for Construction of Pressure Vessels Division 1
ASME Code
Sec VIII Division-2:2023
BPVC
Section VIII-Rules for Construction of Pressure Vessels Division
2-Alternative Rules
ASME Code
Sec VIII Division-3:2023
BPVC
Section VIII-Rules for Construction of Pressure Vessels Division
3-Alternative Rules for Construction of High Pressure Vessels
ASME
Code Sec. IX: 2023
BPVC
Section IX-Welding, Brazing, and Fusing Qualifications
ASME
Code Sec. V: 2023
BPVC
Section V-Non-destructive Examination
IS
2825:1969
(RA
2022) +Amendments
Code for
Unfired Pressure Vessel
IS
4503:1967
(RA
2023)
+Amendments
Specification
for Shell & Tube Type heat exchanger
BS
PD 5500:2021
Specification
for unfired pressure vessels
BS
EN 13445-1:2021
Unfired
pressure vessels General
BS
EN 13445-3:2021
Unfired
pressure vessels Design
BS
EN 13445-5:2021
Unfired
pressure vessels Inspection & Testing
PED
2014/68/EU: 2014
European
Pressure Equipment Directive for design, manufacture and conformity
assessment of pressure equipment and assemblies with a maximum allowable
pressure PS greater than 0.5 bar
BS
EN 13458-2:2002
Cryogenic
vessels -Static vacuum insulated vessels Part 2: Design, fabrication,
inspection and testing
BS
EN 13530-1:2002
Cryogenic
vessels. Large transportable vacuum insulated vessels Fundamental
requirements
BS
EN 13530-2:2002
Cryogenic
vessels. Large transportable vacuum insulated vessels Design, fabrication,
inspection and testing
Boiler
and Boiler Components
Design
Appraisal,
Stagewise/
Final inspection
ASME
Code Sec. I :2023
BPVC
Section I-Rules for Construction of Power Boilers
ASME
Code Sec. IX: 2023
BPVC
Section IX-Welding, Brazing, and Fusing Qualifications
ASME
Code Sec. V: 2023
BPVC
Section V-Nondestructive Examination
BS
EN 12952-1:2015
Water-tube
boilers and auxiliary installations General
BS
EN 12953-1:2012
Shell
boilers General
IBR
1950
Indian Boiler Regulations 1950 with
amendments
Boiler
Plant External Piping
ASME
B31.1:2022
Power
Piping
ASME
Code Sec. IX: 2023
BPVC
Section IX-Welding, Brazing, and Fusing Qualifications
ASME
Code Sec. V: 2023
BPVC
Section V- Non-destructive Examination
IBR
1950
Indian
Boiler Regulations 1950 with amendments
Gas
Cylinders
Stagewise/
Final inspection
BS
EN 1442:2017
LPG
equipment and accessories. Transportable refillable welded steel cylinders
for LPG. Design and construction
Tanks
Stagewise/
Final inspection
API
650-13th Edition-2020
Welded
Tanks for Oil Storage
API
STD 620 12th Edition-2013+Addendum 1,2,3
Design
and Construction of Large, Welded, Low-Pressure Storage Tanks
Transportable
Pressure
Containers
Stagewise/
Final inspection
ASME
Code Sec VIII Div-1:2023
BPVC
Section VIII-Rules for Construction of Pressure Vessels Division 1
Formed
Components
Stagewise/
Final inspection
ASME
Code Sec VIII Div-1:2023
BPVC
Section VIII-Rules for Construction of Pressure Vessels Division 1
ASME
Code Sec VIII Div-2:2023
BPVC
Section VIII-Rules for Construction of Pressure Vessels Division
2-Alternative Rules
ASME Code
Sec VIII Div-3 : 2023
BPVC
Section VIII-Rules for Construction of Pressure Vessels Division
3-Alternative Rules for Construction of High Pressure Vessels
Structural
Fabrication
Stagewise/
Final inspection
AWS
D1.1/ D1.1M:2020
Structural
Welding Code- Steel
BS
EN 1993-1-3:2006
Design
of steel structures General rules
PD
6695-1-10:2009
Recommendations
for the design of structures to BS EN 1993-1-10
Metallic
Hose Assemblies
Stagewise/
Final
inspection
BS
4089:1999
Specification
for metallic hose assemblies for liquid petroleum gases and liquefied natural
gases
Pressure
Equipment
In-service
inspection
PED
2014/68/EU
Client
requirements in line with applicable EU directives.
Client
Requirements in the form of QAP mentioning required specification and scope
mentioned in this scope. However, the applicable National & International
Codes and Standards shall be among those which are either referred in the
scope statement or shall be equivalent to the standards described above for
the relevant scope category
IAF Scope
18 Machinery and Equipment
Compressor
Stagewise
/ Final inspection
API-618,
5th Edition:2007+ Errata 1,2: (RA 2016)
Reciprocating
compressors for the refining, petroleum, and industrial gas industries
Crane
Stagewise
/ Final inspection
IS 3177
:2020
Electric
Overhead Travelling Crane and Gantry Crane for all
Applications
— Code of Practice (Third Revision)
Conveyors
Stagewise
/ Final inspection
BS EN
115-1:2018
Safety of
escalators and moving walks Construction and installation
Gear
Box
Stagewise
/ Final inspection
ANSI/AGMA
6011-J14-2014
Standard
on Specification for High Speed Helical Gear Units
API 613: 6th
Edition : 2021
Special
purpose gear units for petroleum, chemical and gas industry services
Valves
(Ferrous & Non-Ferrous)
Design
Appraisal, Stagewise / Final inspection
API 602,
11th Edition : 2022
Gate,
globe, and check valves for sizes DN100 (NPS4) and smaller for the petroleum
and natural gas industries.
API 603, 9th
Edition : 2018
Corrosion-resistant,
bolted bonnet gate valves-flanged and butt-welding ends
BS EN ISO
10434:2020
Bolted
bonnet steel gate valves for the petroleum, petrochemical and allied
industries
API 600,
14th Edition :
2021;
Errata 1
Steel Gate
Valves - Flanged and Butt-welding Ends, Bolted Bonnets
API 6D,25th
Edition : 2021; Errata 1,2,3 and Addendum 1
Specification
for Valves
API
6A 21st Edition : 2018; Errata 1,2,3,4,5 Addendum 1,2,3
Specification
for Wellhead and Tree Equipment
API
594 9th Edition : 2022
Check
Valves: Flanged, Lug, Wafer, and Butt-welding
API
608 6th Edition : 2020
Metal
Ball Valves - Flanged, Treaded and welding ends
API
609 9th Edition : 2021
Butterfly
Valves: Double-flanged, Lug- and Wafer-type, and Butt-welding Ends
Pumps
Stagewise
/ Final inspection
API
674 3rd Edition : 2010; Errata1,2 and
(RA
2016)
Positive
Displacement Pumps -Reciprocating
API
610 12th Edition : 2021
Centrifugal
Pumps for Petroleum Petrochemical and Natural Gas Industries
IS
6595: Part1:2018
Horizontal
centrifugal pumps for clear, cold water - Specification: Part 1 agricultural
and rural water supply purposes (Fourth Revision)
IS
6595: Part 2:1993 (RA 2022)
Horizontal
centrifugal pumps for clear, cold water: Part 2 general purpose (Other than
agricultural and rural water supply) - Specification (Second Revision)
IS
11745:1986
(RA
2021)
Technical
Supply Conditions For Positive Displacement Pumps - Reciprocating
IS
5120:1977
(RA 2021)
+Amendments
Technical
requirements for rotodynamic special purpose pumps (First Revision)
Client
Requirements in the form of QAP mentioning required specification and scope
mentioned in this scope. However, the applicable National & International
Codes and Standards shall be among those which are either referred in the
scope statement or shall be equivalent to the standards described above for
the relevant scope category
IAF
Scope 19Electrical
Equipment
Generator
& Motor
Stagewise
/ Final inspection
IEC
60034:2024
Rotating
electrical machines- All parts
IS
12075:2008
Mechanical
Vibration of Rotating Electrical Machines with Shaft Heights 56 mm and Higher
- Measurement, Evaluation and Limits of Vibration Severity
IS
12065: 198
(RA
2019)
Permissible
limits of noise level for rotating electrical machines
IEC
60529: 1989 +AMD1:1999+AMD2:2013
Degree
of protection provided by enclosure (IP Code)
Transformer
Stagewise
/ Final inspection
IEC
60076-1:2011
Power
transformers - Part 1: General
IEC
60076-2:2011
Power
transformers - Part 2: Temperature rise for liquid-immersed transformers
IEC
60076-3:2013 +AMD1:2018
Power
transformers - Part 3: Insulation levels, dielectric tests and external
clearances in air
IEC
60076-5:2006
Power
transformers - Part 5: Ability to withstand short circuit
IEC
60076-6:2007
Power
transformers - Part 6: Reactors
IS
11171: 1985
(RA
2016)
Specification
for Dry type power transformers
IS
1180: Part 1:2014
(RA
2019)
Outdoor
Type Oil Immersed Distribution Transformers Upto and Including 2 500 kVA,
33KV - Specification Part 1 Mineral Oil Immersed (Fourth Revision)
IEC
60137:2017
Insulated
bushings for alternating voltages above 1000V
IS
2026: Part1:2011
(RA
2021)
Power
Transformer – Part1 General
IS
2026: Part2:2010
(RA
2020)
Power
Transformer – Part2 Temperature Rise
IS
2026: Part 3:2018
Power
Transformers Part 3 Insulation Levels, Dielectric Tests and External
Clearances in Air (Fourth Revision)
Control
Switchgears/
Instrument
Panels
Stagewise
/ Final inspection
IEC
60947-1:2020
Low-voltage
switchgear and controlgear - Part 1: General rules
IEC
60947 2:2016 +AMD1:2019
Low-voltage
switchgear and controlgear - Part 2: Circuit-breakers
IEC
60947-4-1:2020
Low-voltage
switchgear and controlgear - Part 4-1: Contactors and motor-starters -
Electromechanical contactors and motor-starters
IEC
60947-5-1:2024
Low-voltage
switchgear and controlgear - Part 5-1: Control circuit devices and switching
elements - Electromechanical control circuit devices
IEC
62271:2024
High-voltage
switchgear and controlgear - All Parts
Bus
Duct
Stagewise
/ Final inspection
IS
8084:1976
(RA
2017)
Interconnecting
busbars for ac voltage above 1 KV upto and including 36 KV
IEC
60168:1994 +AMD1:1997 +AMD2:2000
Tests
on indoor and outdoor post insulators of ceramic material or glass for
systems with nominal voltages greater than 1000 V
Cables
Stagewise
/ Final inspection
IS
1554-1:1988
(RA
2020)
PVC
insulated (heavy duty) electric cables: Part 1 For working voltages upto and
including 1 100 V
IS
1554-2:1988
(RA
2020)
PVC
Insulated (Heavy Duty) Electric Cables - Part 2 : for Working Voltages from
3"3 KV up to and Including 11 KV
IS
7098-1: 1998
(RA
2020)
Crosslinked
polyethylene insulated PVC sheathed cables: Part 1 For working voltage upto
and including 1 100 V
IS
7098- 2:2011
(RA
2021)
Crosslinked
Polyethylene Insulated Thermoplastics Sheathed Cables - Part 2 for Working
Voltages from 3.3 KV up to and Including 33 KV
IS
7098-3: 1993
(RA
2014)
Cross-linked
polyethylene insulated thermoplastic sheathed cables: Part 3 For working
voltages from 66 KV upto and including 220 KV
from
66KV up to and including 220 KV
IEC
60502:2024
Power
cables with extruded insulation and their accessories for rated voltages from
1 KV (Um = 1,2 KV) up to 30 KV (Um = 36 KV) - ALL PARTS
IS
692:1994
(RA
2020)
Paper
insulated lead-sheathed cables for rated voltage upto and including 33 KV
specification
Battery
Charger
Stagewise
/ Final inspection
IEC
60146-1-1:2024
Semiconductor
converters - General requirements and line commutated converters - Part 1-1:
Specification
of basic requirements
converters
- Part 1-1: Specification of basic requirements
IS/IEC
60269-1: 2014
Low-voltage
fuses - Part 1: General requirements
Battery
Stagewise
/ Final inspection
IS 1652:
2013
(RA 2019)
Stationary
cells and batteries, lead - Acid type with plante positive plates -
Specification
Protection
of Equipment in Hazardous Atmosphere
Stagewise
/ Final inspection
IEC
60079-0:2017
Explosive atmospheres - Part 0: Equipment -
General requirements
IEC
60079-1:2014
Explosive
atmospheres - Part 1: Equipment protection by flameproof enclosures
"d"
IEC
60079-2:2014
Explosive
atmospheres - Part 2: Equipment protection by pressurized enclosure
"p"
IEC
60079-5:2015
Explosive
atmospheres - Part 5: Equipment protection by powder filling "q"
IEC
60079-6:2015 +AMD1:2020
Explosive
atmospheres - Part 6: Equipment protection by liquid immersion "o"
IEC
60079-7:2015 +AMD1:2017
Explosive
atmospheres - Part 7: Equipment protection by increased safety "e"
IEC
60079-11:2023
Explosive
atmospheres - Part 11: Equipment protection by intrinsic safety "i"
Conductors
for overhead lines around wire concentrically stranded conductors
IS
398:1996: part 1
(RA
2018)
Aluminum
conductors for overhead transmission purposes: Part 1 Aluminum
IEC
60168:2000
Tests
on indoor and outdoor post insulators of ceramic material or glass for
systems with nominal voltages greater than 1000 V
IS
731 : 1971
(RA
2021)
Porcelain
insulators for overhead power lines with a nominal voltage greater than 1000
V
Electrical
Installation
In-service
Inspection of Electrical Installation
EN
IEC 60079-17:2024
Explosive
atmospheric Electrical installation inspection and maintenance with covering
equipment protection systems as
Ex
d, Ex e, Ex p, Ex m, Ex t, Ex o and Ex h
Client
Requirements in the form of QAP mentioning required specification and scope
mentioned in this scope. However, the applicable National & International
Codes and Standards shall be among those which are either referred in the
scope statement or shall be equivalent to the standards described above for
the relevant scope category
IAF
Scope 21
Aerospace
Aeronautical
components,
Aero
structural components (Metallic)
Stage
and Final inspection
Client
Requirements in the form of Check sheet, technical specifications, QA
codes/DGAQA requirements.
Client
Requirements in the form of Project Specification, Datasheet, Drawings and
QAP as per the applicable National & International Codes and Standards.
Components
for unmanned ariel survey vehicle of military application
Stage
and Final inspection
Client
Requirements in the form of Check sheet, technical specifications, QA
codes/DGAQA requirements.
Client
Requirements in the form of Project Specification, Datasheet, Drawings and
QAP as per the applicable National & International Codes and Standards.
Aerospace
machined components & assembly Non-metallic & composite parts
Stage
and Final inspection
Client
Requirements in the form of Project Specification, Datasheet, Drawings and
QAP as per the applicable National & International Codes and Standards.
Client
Requirements in the form of Project Specification, Datasheet, Drawings and
QAP as per the applicable National & International Codes and Standards.
GSE/GHE,
TTGE (Tools Testers & Ground Equipment)
Stage
and Final inspection
Client Requirements
in the form of Project Specification, Datasheet, Drawings and QAP as per the
applicable National & International Codes and Standards.
Client
Requirements in the form of Project Specification, Datasheet, Drawings and
QAP as per the applicable National & International Codes and Standards.
Defence
components
Components
covered for defence application
Stage
and Final inspection
Client
Requirements in the form of Project Specification, Datasheet, Drawings and
QAP as per the applicable National & International Codes and Standards.
Client
Requirements in the form of Project Specification, Datasheet, Drawings and
QAP as per the applicable National & International Codes and Standards.
IAF
Scope 22
Other
Transport Equipment
Transport
Equipment Prime mover, Chassis, Cabin, Interface assembly, Transportation
vehicle and Fire tenders
Stagewise/
Final
inspection
and performance Tests
Client
Requirements in the form of Project Specification, Datasheet, Drawings and
QAP as per the applicable National & International Codes and Standards.
Client
Requirements in the form of Project Specification, Datasheet, Drawings and
QAP as per the applicable National & International Codes and Standards.
Railway
DC
EMU, MEMU Motor and Trailor Coaches, Wagon and their Components,
Car body,
Car body fittings Guidance,
Power Systems,
Propeller and Auxiliary
systems, Interiors Cabelling and Cabinets,
Door Systems, HVAC,
Lighting, Couplers, Infrastructure
Client
and RDSO Requirements in the form of Project Specification, Datasheet, FAT
(Factory
Acceptance Test), Drawings and QAP as per the applicable National &
International Codes and Standards.
Client
Requirements in the form of Project Specification, Datasheet, Drawings and
QAP as per the applicable National & International Codes and Standards.
The
following
offices
of DNV
Business
Assurance
India
Pvt.
Ltd. are
included
under
accreditation
S.No
Location
Address
Key
activities
performed
01
Mumbai
(Main
Office)
Equinox
Business
Park,
Tower
3,
6th
Floor,
Off
Bandra
Kurla
Complex,
LBS
Marg,
Kurla
(West),
Mumbai
-
400070,
Maharashtra,
India
Top
management
functions,
quality
management
system
functions,
administration
&
accounts,
other
key
activities
as
applicable
to
main
office.
02
Chennai
(Branch
Office)
ROMA
No.
10,
G.S.T
Road,
Near
Kathipara
Flyover,
Chennai
–
600016,
Tamil
Nadu,
India
