IAF Scope 17a

BASIC METALS 

Ferrous Alloys, Steels, Structural Shapes – Plates, Coils, Bars, Rods, Sections, Wires

Stage wise/ In-process, and Final Inspection

IS 2002 : 2009

Steel plate for pressure vessel for intermediate and high temperature service including boilers

IS 7452 : 2013

Hot rolled steel sections for doors, windows and ventilators-specification

IS 1732 : 1989

Steel bars, round and square for structural and general engineering purposes-dimensions

IS 7887 : 1992

Mild steel wire rod for general engineering purposes-specification

IS 2062 : 2011

Hot rolled medium and high tensile structural steel — specification

ASME SEC II Part A 2021

Ferrous Material Specifications

EN 10028 : 2017

Flat products made of steels for pressure purposes. General requirements

Pipe Fittings

Stage wise/ In-process, and Final Inspection

IS 1239 : 2011

Steel tubes, tubular and other wrought steel fittings — specification

ASTM A 234 : 2023

Standard Specification for 

  Piping Fittings of Wrought

Carbon Steel and Alloy Steel for Moderate and High Temperature Service

ASTM A 182 : 2023

Specification for Forged or Rolled Alloy-Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service

EN 877 : 2006

Specification for Cast Iron Pipes and fittings

ASTM A 420 : 2022

Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service

ASTM A 403 : 2022

Specification for Wrought Austenitic Stainless-Steel Piping Fittings

ASTM A 758 : 2019

Specification for Wrought-Carbon Steel Butt-Welding Piping Fittings with Improved Notch Toughness

ASTM A 774 : 2019

Specification for As-Welded Wrought Austenitic Stainless-Steel Fittings for General Corrosive Service at Low and Moderate Temperatures

Tubes

Stage wise/ In-process, and Final Inspection

IS 1161 : 2016

Steel Tubes For Structural Purposes – Specification

IS 3601 : 2006

Steel tubes for mechanical

and general engineering purposes — specification

ASTM A 178 : 2019

Specification for Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler and Super heater Tubes

ASTM A 179 : 2019

Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes

ASTM A 192 : 2017

Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service

ASTM A 209 : 2022

Specification for Seamless Carbon-Molybdenum Alloy- Steel Boiler and Super heater Tubes

ASTM A 213 : 2022

Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Super heater, and Heat-Exchanger Tubes

ASTM A 214 : 2019

Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes

ASTM A 249 : 2023

Specification for Welded Austenitic Steel Boiler, Super heater, Heat-Exchanger, and Condenser Tubes

API 5CT : 2019

Specification for Casing and Tubing

EN 10255 : 2009

Non-alloy steel tubes suitable for welding and threading. Technical delivery conditions

Castings

Stage wise/ In-process, and Final Inspection

IS 1030 : 1998

Carbon steel castings for general engineering purposes – specification

IS 2644 : 1994

High strength steel castings for general engineering and structural purposes-specification

IS 1865: 1991

Iron castings with spheroidal or nodular graphite – specification

ASTM A 915 : 2018

Steel Castings, Carbon and Alloy, Chemical Requirements Similar to Standard Wrought Grades

ASTM A 958 : 2017

Steel Castings, Carbon and Alloy, with Tensile Requirements, Chemical Requirements Similar to Standard Wrought Grades

ASTM A 781 : 2021

Standard Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use

Forgings

Stage wise/ In-process, and Final Inspection

IS 2004 : 1991

Carbon steel forgings for general engineering purposes-specification

ASTM A 788 : 2023

Standard Specification for Steel Forgings, General Requirement

ASTM A 336 : 2021

Alloy Steel Forgings for Pressure and High- Temperature Parts

ASTM A 372 : 2020

Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels

ASTM A 473 : 2023

Standard Specification for Stainless Steel Forgings

ASTM A 1049, 2018R23

Standard Specification for Stainless Steel Forgings, Ferritic/Austenitic (Duplex), for Pressure Vessels and Related Components

Client Requirements in the form of Project Specification, Datasheet, Drawings and QAP. However, the applicable National & International Codes and Standards shall be among those which are either referred in the scope statement or shall be equivalent to the standards described above for the relevant scope category

IAF Scope 17b FABRICATED METAL PRODUCTS

Pressurized and unpressurised Vessels

Stage wise/ In-process, and Final Inspection

ASME Sec VIII, 2021

Rules for construction of pressure vessels

IS 2825 : 1969

Code for Unfired pressure vessels

EN 13445 : 2018

Unfired Pressure Vessels

Boilers

Stage wise/ In-process, and Final

IBR-1950

Indian Boiler Regulations

Inspection

ASME Sec I, 2021

Power Boilers

EN 12952 & 12953, 2012

Water Tube Boiler standards & Shell Boiler standards

Tanks

Stage wise/ In-process, and Final Inspection

IS 803 : 1976

Code of practice for design, fabrication and erection of vertical mild steel cylindrical

welded oil storage tanks

IS 10987 : 1992

Code of fabrication, Practice for design, testing and installation, of under-ground/above-ground

horizontal cylindrical steel storage tanks for petroleum products

API 620 : 2013

Design and Construction of Large, Welded, Low-Pressure Storage Tanks

API 650 : 2020

Welded tanks for oil storage

ASME Sec VIII 2021

Rules for construction of pressure vessels

Gas Cylinders

Stage wise/ In-process, and Final Inspection

IS 8196 : 2004

Steel cylinders for compressed gases (atmospheric gases, hydrogen, high pressure liquefiable gases and dissolved acetylene gases) — code of practice

IS 15490 : 2004

Cylinders for on-board storage of compressed

natural gas as a fuel for automotive vehicles — specification

ISO 11119-3 : 2013

Gas cylinders -- Refillable composite gas cylinders and tubes -- Design, construction and testing -- Part 3: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450L with non-load-sharing metallic or non-metallic liners

SAW pipes

Stage wise/ In-process, and Final

API 5L, 46^th Edition 2018

Specification for line pipe

Inspection

IS 3589 : 2001

Steel pipes for water and sewage

ERW Pipe

Stage wise/ In-process, and Final Inspection

IS 3589 : 2001

Steel pipes for water and sewage

ASTM A 53 : 2022

Seamless and Welded Standard Steel Pipe

Ductile Iron Pipes

Stage wise/ In-process, and Final Inspection

IS 8329 : 2000

Centrifugally cast (spun) ductile iron pressure pipes for water, gas and sewage – specification

ISO 2531 : 2009

Ductile iron pipes, fittings, accessories and their joints for water applications

ASTM A 746 : 2022

Standard Specification for Ductile Iron Gravity Sewer

Pipe

ASTM A 716 : 2022

Standard Specification for Ductile Iron Culvert Pipe

ASTM A 74 : 2021

Standard Specification for Cast Iron Soil Pipe and Fittings

Distillation Columns

Stage wise/ In- process, and Final Inspection

IS 11556 : 2005

Purchaser’s data sheets for distillation column

ASME SEC VIII 2021

Rules for construction of pressure vessels

Heat Exchangers

Stage wise/and

Final Inspection

IS 4503 : 1967

Specification for shell and

Tube type heat exchangers

TEMA 10th Edition, 2019

The Tubular Exchanger Manufacturers Association

ASME Sec VIII, 2021

Rules for construction of pressure vessels

Client Requirements in the form of Project Specification, Datasheet, Drawings and QAP. However, the applicable National & International Codes and Standards shall be among those which are either referred in the scope statement or shall be equivalent to the standards described above for the relevant scope category

IAF Scope 18

MACHINERY AND EQUIPMENT

Pumps 

Stage wise/and Final Inspection

IS 6595 : 2002

Horizontal centrifugal pumps for clear, cold water— specification

IS 11745 : 1986

Technical supply conditions

for positive displacement pumps-reciprocating

API 610 : 2021

Centrifugal pumps for petroleum, heavy duty chemical, and gas industry service

API 674 : 2010

Positive displacement pumps – Reciprocating

API 675 : 2014

Positive displacement pumps – Controlled volume

IS 5120 : 1977

Technical requirements for roto dynamic special purpose pumps

Axial Fans, Blowers, Dryers

Stage wise/and Final Inspection

IS 4894 : 1987

Specification for - Centrifugal fans

IS 1710 : 1989

Specification for pumps — vertical turbine mixed and axial flow, for clear cold water

201-02

AMCA Standard for fan testing

HVAC systems

Stage wise/and Final Inspection

IS 659 : 2004

Safety Code for Air Conditioning

IEC 60335 series

Safety of Electrical Household appliances

Valves

Stage wise/ In-process, and Final Inspection

IS 9890 : 1981

Specification for general purpose ball valves

API 598 : 2023

Valve inspection and testing

API 600 : 2021

Bolted bonnet steel gate valves for petroleum and

natural gas industries

API 602 : 2022

Compact Steel Gate Valves—Flanged, Threaded, Welding, and Extended-Body Ends

ASME B16.34 : 2020

Valves—Flanged, Threaded, and Welding End

EN 12516 : 2014

Industrial valves. Shell design strength. Calculation method for steel valve shells

Gear Boxes

Stage wise/and Final Inspection

IS 7403 : 1974

Code of practice for selection of standard worm and helical gear boxes

API 613 : 2021

Special purpose gear units for petroleum, chemical, and gas industry services

Bearings

Stage wise/and Final Inspection

IS 13962 : 1994

Rolling bearings - metric tapered roller bearings - designation system

API 670 : 2014

Machinery Protection Systems

Cranes

Stage wise/and Final Inspection

IS 3177 : 2020

Electric overhead travelling crane and gantry crane for all applications - code of practice

IS 807 : 2006

Design, erection and testing (structural portion) of cranes and hoists — code of practice

IS 14470 : 1997

Cranes -test code and procedures

ASME B 30.2 : 2022

Overhead and Gantry Cranes (Top Running Bridge, Single

or Multiple Girder, Top Running Trolley Hoist)

Skid mounted system

Stage wise/and Final Inspection

IS 11461 : 1985

Code of practice for compressor safety

ASTM A 53 : 2022

Seamless and Welded Standard Steel Pipe

Machineries

Witness Test & Final Inspection

Machinery Directive 2006/42/EC and Machinery Regulation (EU) 2023/1230

European Machinery Directive and Regulation

 [Excluding Annex IV Machines]

IS 16819 : 2018 / ISO 12100 : 2010

Safety of machinery -- General principles for design -- Risk assessment and risk reduction

IS 16810 (Part 1): 2018

Safety of machinery – Safety related parts of control systems -- Part 1: General principles for design

IS 16810 (Part 2): 2018

Safety of machinery – Safety related parts of control systems -- Part 2: Validation

IS 16818 : 2018

Safety of machinery -- Emergency stop function -- Principles for design

IS 16817 : 2018

Safety of machinery -- Two-hand control devices -- Functional aspects and design principles

IS 16816 : 2019 

Safety of machinery -- Minimum gaps to avoid crushing of parts of the

human body

IS 16815 : 2019

Safety of machinery -- Positioning of safeguards with respect to the approach speeds of parts of the human body

IS 16835 (Part 1): 2018

Safety of machinery – Pressure sensitive protective devices -- Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors

IS 16835 (Part 2): 2018

Safety of machinery – Pressure sensitive protective devices -- Part 2: General principles for design and testing of pressure-sensitive edges and pressure-sensitive bars

IS 16835 (Part 3): 2018

Safety of machinery -- Pressure sensitive protective devices -- Part 3: General principles for design and testing of pressure-sensitive bumpers, plates, wires and similar devices

IS 16814 : 2018

Safety of machinery -- Safety distances to prevent hazard zones being reached by upper and lower limbs

IS 16813 : 2019

Safety of machinery --

Prevention of unexpected start-up

IS 16812 : 2018

Safety of machinery -- Interlocking devices associated with guards -- Principles for design and selection

IS 16811 : 2018

Safety of machinery -- Guards -- General requirements for the design and construction of fixed and movable guards

IS 16809 (Part 1): 2018

Safety of machinery -- Permanent means of access to machinery -- Part 1: Choice of fixed means and general requirements of access

IS 16809 (Part 2): 2018

Safety of machinery - Permanent means of access to machinery -- Part 2: Working platforms and walkways

IS 16809 (Part 3): 2018

Safety of machinery -- Permanent means of access to machinery -- Part 3: Stairs, stepladders and guard-rails

IS 16809 (Part 4):2018

Safety of machinery -- Permanent means of access to machinery -- Part 4: Fixed ladders

IS 16834 (Part 1): 2018

Safety of machinery -- Reduction of risks to health resulting from hazardous

substances emitted by machinery -- Part 1: Principles and specifications for machinery manufacturers

IS 16834 (Part 2): 2018

Safety of machinery -- Reduction of risks to health resulting from hazardous

substances emitted by machinery -- Part 2: Methodology leading to verification procedures

IS 16808 : 2018

Safety of machinery -- Hygiene requirements for the design of machinery

IS 16807 : 2018

Safety of machinery -- Fire prevention and fire protection

IS 16912 : 2018

Safety of machinery -- Lubricants with incidental product contact -- Hygiene requirements

IS 16806 (Part 1): 2018

Safety of machinery -- Evaluation of the emission of airborne hazardous substances -- Part 1: Selection of test methods

IS 16806 (Part 2): 2018

Safety of machinery -- Evaluation of the emission of airborne hazardous substances -- Part 2: Tracer gas method for the measurement of the emission rate of a given pollutant

IS 16806 (Part 3): 2018

Safety of machinery -- Evaluation of the emission of airborne hazardous

substances -- Part 3: Test bench method for the measurement of the emission rate of a given pollutant

IS 16806 (Part 4): 2018

Safety of machinery -- Evaluation of the emission of airborne hazardous substances -- Part 4: Tracer method for the measurement of the capture efficiency of an exhaust system

IS 16806 (Part 5): 2018

Safety of machinery -- Evaluation of the emission of airborne hazardous substances -- Part 5: Test bench method for the measurement of the separation efficiency by mass of air cleaning systems with unducted outlet

IS 16806 (Part 6): 2018

Safety of machinery -- Evaluation of the emission of airborne hazardous substances -- Part 6: Test bench method for the measurement of the separation efficiency by mass of air cleaning systems with ducted outlet

IS 16806 (Part-7): 2018

Safety of machinery --

Evaluation of the emission of airborne hazardous substances -- Part 7: Test bench method for the measurement of the pollutant concentration parameter

IS 16806 (Part 8): 2018

Safety of machinery -- Evaluation of the emission of airborne hazardous substances -- Part 8: Room method for the measurement of the pollutant concentration parameter

IS 16806 (Part 9): 2018

Safety of machinery -- Evaluation of the emission of airborne hazardous substances -- Part 9: Decontamination index

IS 16504 (Part 1): 2017 / IEC 60204 -1: 2008

Electrical Machine Safety Standard

All applicable harmonised standards shall be followed as per official journal OJ L 157, dated 9.6.2006

Client Requirements in the form of Project Specification, Datasheet, Drawings and QAP. However, the applicable National & International Codes and Standards shall be among those which are either referred in the scope statement or shall be equivalent to the standards described above for the relevant scope category

IAF Scope 19

ELECTRICAL AND OPTICAL EQUIPMENT

Electric Domestic Appliances

Final & Sampling Inspection

ISO 60335- Part-1-2010

Household and similar electrical appliances

ISO 2859 : 1999

Sampling procedures for Inspection

Transformers

Final Inspection

IS 2026 Part 1 to 4 : 2011

Power transformers

IS 16227 Part 2 : 2016

Current transformers

IS 3156 Part 1 to 4 : 1992

Voltage transformers

IEC 60076 : 2018

Power transformers

Electric Motors

Final Inspection

IEC 60034-PART1 : 2022

Three-phase induction motors

IS 4029 : 2010

Guide for Testing Three Phase Induction Motors

IS 60034 : 2017

Rotating electrical machines

MCC

Final Inspection

IEC 61439-2 : 2020

Power switchgear and control gear assemblies

IS 8623-1 : 1993

Low-Voltage Switchgear and Control Gear Assemblies, Part 1: Requirements for Type-Tested and Partially Type-Tested Assemblies

IS 12729 : 2004

Common High-Voltage Switchgear and Control gear Standards

IEC 61439 : 2020

Low-voltage switchgear and control gear assemblies

Control Panels

Final Inspection

IS 732 : 1989

Code of Practice for Electrical Wiring Installations

IS 3072 : 1975

Code of practice for installation and maintenance of switchgear

IEC 61439 : 2020

Low-voltage switchgear and control gear assemblies - Part 1: General rules

Junction Boxes

Final Inspection

IS 732 : 1989

Code of Practice for Electrical Wiring Installations

IEC 62790 : 2020

Junction boxes for photovoltaic modules - Safety requirements and tests

Switch Gears

Final Inspection

IS 13947-5 : 2004

Low-Voltage Switchgear and Control gear, Part 5: Control Circuit Devices and Switching Elements, Section 2: Proximity Switches [ETD 7: Low Voltage Switchgear and Control gear]

IS 732 : 1989

Code of Practice for Electrical Wiring Installations

IS 9921 : 1985

Alternating Current Disconnectors (isolators) and Earthing Switches for Voltages

IEC 62271 : 2023

High-voltage switchgear and control gear

Insulated Cables &

Final Inspection

IS 7098 : 2011

Cross-linked polyethylene

Wires

insulated PVC sheathed cables

IS 1554 : 1988

PVC insulated (heavy duty) electric cables

IS 9968 : 1988

Elastomer-insulated Cables

IS 694 : 2010

Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 450/750 v

IS 14255 : 1995

Specification for AERIAL Bunched Cables for working Voltage. Up to & including 1100 Volts.

IEC 60502 : 2021

Power cables with extruded insulation and their accessories for rated voltages from 1 kV up to 30 kV

IEC 60840, 2020

Power cables with extruded insulation and their accessories for rated voltages above 30 kV (Um = 36 kV) up to 150 kV (Um= 170 kV) - Test methods and requirements

Batteries

Final Inspection / Sampling and witness testing

IS 15549 : 2005

Stationary Regulated Lead Acid Batteries [ETD 11: Secondary Cells and Batteries]

IEC 60896-21 : 2004

Stationary lead-acid batteries - Part 21: Valve regulated types - Methods of test

IEC 60896-22 : 2004

Stationary lead-acid batteries - Part 22: Valve regulated types – Requirements

IEC 60623 : 2017

Secondary cells and batteries containing alkaline or other non-acid electrolytes - Vented nickel-cadmium prismatic rechargeable single cells

IEC 61427-1 : 2013 

Secondary cells and batteries for renewable energy storage - General requirements and methods of test - Part 1: Photovoltaic off-grid application

IEC 61427-2 : 2015

Secondary cells and batteries for renewable energy storage - General requirements and methods of test - Part 2: On-grid applications

IEC 61427 : 2015

Secondary cells and batteries for photovoltaic energy systems (PVES) – General requirements and methods of test

Generators

Final Inspection

IS 13364 : 1992

AC generators driven by reciprocating internal combustion engine

IS 8753 : 1977

Code for acceptance tests on stationary steam generators of the power station type

IS 60034 : 2022

Rotating Electrical Machines

Computers

Final & Sampling Inspection

ISO/IEC 10779 : 2020

Requirements and recommendations for office equipment accessibility, including printers, scanners

and copiers

ISO/IEC 29136 : 2012

Information technology — User interfaces — Accessibility of personal computer hardware

ISO 2859 : 2017

Sampling procedures for Inspection

Lighting equipment and electric lamps

Final & Sampling Inspection

IEC 60064 : 1993 Amd 2005

Tungsten filament lamps for domestic and similar general lighting purposes

IEC 60809 & 60810 : 2019

Lamps for Road Vehicles

IEC 60188 : 2001

High-pressure mercury vapour lamps – Performance specifications

ISO 2859 : 2017

Sampling procedures for Inspection

Television and radio receivers

Final & Sampling Inspection

EN 62028 : 2004

General methods of measurement for digital television receivers

EN 62105 : 2002

Digital audio broadcast system – Specification of the receiver data interface (RDI)

IEC 62216 : 2011

Digital terrestrial television receivers for the DVB-T system

ISO 2859 : 1999

Sampling procedures for Inspection

Low Voltage Devices

Witness Test & Final Inspection

2014/35/EU

Low Voltage European Regulation

Applicable harmonised standards shall be followed

Electro-Magnetic Devices

Witness Test

2014/30/EU

Electromagnetic Compatibility European Regulation

Applicable harmonised standards shall be followed

Client Requirements in the form of Project Specification, Datasheet, Drawings and QAP. However, the applicable National & International Codes and Standards shall be among those which are either referred in the scope statement or shall be equivalent to the standards described above for the relevant scope category

IAF SCOPE 28 CONSTRUCTION

All types of Buildings

Technical control at site for the building construction related activities covering Stage wise and / or Finished Product Inspection

IS 456-2000

Plain & Reinforced concrete code of Practice

IS 2212 (1991)

Code of Practice for Brickworks

IS 816 : 1969

Code of Practice for Use of Metal Arc Welding for General Construction in Mild Steel

IS 10262 (2009)

Guidelines for concrete mix design proportioning

IS 6313 (PART3) :2001

Code of practice of Anti-Termite measuring in building

Method of sampling &

Analysis of concrete

IS 1199 (1959)

Method of sampling &

Analysis of concrete

IS 2402(1963)

Code of Practice for External Rendered Finishes

IS 12843(1989)

Tolerances for Erection of Steel Structure

IS 3067 : 1988

Code of Practice for General Design Details and Preparatory Work for Damp-Proofing and Waterproofing of Building

IS 2395 (Part 1) : 1994

IS 2395 (Part 1): 1994 Painting of Concrete, Masonry and Plaster Surfaces- Code of Practice

SP62 : 1997

NBC 2016

Handbook on Building Construction Practices National Building Code of India 2016 (NBC 2016) - Volume 1 & 2

Client Requirements in the form of Project Specification, Datasheet, Drawings and QAP. However, the applicable National & International Codes and Standards shall be among those which are either referred in the scope statement or shall be equivalent to the standards described above for the relevant scope category