Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling
SA-20/SA-20M
Specification for General Requirements for Steel Plates for Pressure Vessels
SA-203/SA-203M
Specification for Pressure Vessel Plates, Alloy Steel, Nickel.
SA-240/SA-240M
Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
SA-263
Specification for Stainless Chromium Steel-Clad Plate
SA-264
Specification for Stainless Chromium-Nickel Steel-Clad Plate
SA-283/SA-283M
Specification for Low and Intermediate Tensile Strength Carbon Steel Plates
SA-285/SA-285M
Specification for Pressure Vessel Plates, Carbon Steel, Low- and
Intermediate-Tensile Strength
SA-299/SA-299M
Specification for Pressure Vessel Plates, Carbon Steel, Manganese Silicon
SA-302/SA-302M
Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum
and Manganese-Molybdenum-Nickel
SA-353/SA-353M
Specification for Pressure Vessel Plates, Alloy Steel, Double-Normalized and
Tempered 9% Nickel
SA-387/SA-387M
Specification for Pressure Vessel Plates, Alloy Steel, Chromium-
Molybdenum
Fittings
Stage-wise /Final Inspection
ASME SA 234:2017
Spec for pipe fittings of wrought carbon steel and alloy steel for moderate and high temperature service
ASME SA420:2017
Specification for piping fittings of wrought carbon steel and alloy steel for low temperature service.
Tubes
Stage-wise /Final Inspection
ASTM A 179:2015
Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes
ASTM A 192:2015
Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service
ASTM A 209:2015
Specification for Seamless Carbon-Molybdenum Alloy-Steel Boiler and Super heater Tubes
ASTM A 213:2015
Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Super heater, and Heat-Exchanger Tubes
ASTM A 214:2015
Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes
ASTM A 249:2015
Specification for Welded Austenitic Steel Boiler, Super heater, Heat-Exchanger, and Condenser Tubes
API 5CT:2011
Specification for Casing and Tubing
Castings
Stage-wise /Final Inspection,
IS 1030:1998
Carbon steel castings for general engineering purposes - specification
IS 2644:1994
High strength steel castings for general engineering and structural purposes-specification
IS 1865:1991
Iron Castings with Spheroidal or Nodular Graphite - Specification
ASME SA216:2017
Specification for Steel Castings, carbon, suitable for fusion welding for high temperature service.
ASME SA217:2017
Specification for steel castings, martensitic stainless and alloy, for pressure-containing parts, suitable for high-temperature service
ASTM A 781:2015
Standard Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use
Forgings
Stage-wise /Final Inspection
ASTM A 788:2015
Standard Specification for Steel Forgings, General Requirement
ASTM A 336:2015
Alloy Steel Forgings for Pressure and High-Temperature Parts
ASTM A 372:2015
Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels
ASTM A 1049:2015
Standard Specification for Stainless Steel Forgings, Ferritic /Austenitic (Duplex), for Pressure Vessels and Related Components
Steel pipes, Line pipes
Stage-wise /Final Inspection
API 5L: 45th Edition-2013
Specification line pipe
IS 1239:2011 (Part 1 & 2)
Steel Tubes & Tubulars & other wrought Steel Fittings specifications
IS 3589:2001 Add. 2010
Steel Pipes for Water & Sewage(168.3 to 2540mm OD) specifications
IAF Scope 17b
Fabricated Metal Products
Pressurized & Unpressurized Vessels
Stage-wise /Final Inspection
ASME Section I:2017
Rules for Construction of Power Boilers
Boilers
Stage-wise /Final Inspection
ASME Section IV: 2017
Rules for Construction of Heating Boilers.
Storage Tanks
Final inspection
API 650:2013
Welded Tanks for Oil Storage
OR Customer Requirements in the form of QAP mentioning required specification and scope mentioned in this scope. However the applicable National & International Codes and Standards shall be among those which are either referred in the scope statement or shall be equivalent to the standards described above for the relevant scope category
IAF Scope 18
Manufacture of Machinery and Equipment’s
Compressors
Stage-wise/Final inspection
API 618:2007
Reciprocating compressors
API 617:2014
Axial and Centrifugal Compressors, As per Client specific requirements
Lube Oil System Lubrication, Shaft-sealing and Oil-control Systems and Auxiliaries, Fifth Edition (ISO 10438:2008, Modified), Includes Errata (2008)
API 598:2016,
Tenth Edition
IS 9890:1981
Valve Inspection and Testing
Specification for general purpose ball valves
API 600:2015
API 602:2015
Bolted bonnet steel gate valves for petroleum and natural gas industries Compact Steel Gate Valves—Flanged, Threaded, Welding, and Extended-Body Ends
ASME B16.34:2017
EN 12516:2014
Valves—Flanged, Threaded, and Welding End
Industrial valves. Shell design strength. Calculation method for steel valve shells
API 598:2016 Tenth Edition
Valve Inspection and Testing
IS 9890:1981
Specification for general purpose ball valves
Specification for general purpose ball valves
Bolted bonnet steel gate valves for petroleum and natural gas industries
API 602:2015
Compact Steel Gate Valves—Flanged, Threaded, Welding, and Extended-Body Ends
Turbines
Stage-wise/Final Inspection
API 612:2020
Petroleum, Petrochemical and Natural Gas Industries-Steam Turbines-Special-purpose Applications
Centrifugal and Reciprocating Pumps
Stage-wise/Final Inspection
IS 1710:1989
Specification for pumps — vertical turbine mixed and axial flow, for clear cold water
API 610:2021 &IS 5120
Centrifugal Pumps
API 674:2016
Reciprocating pumps
Rotors
Stage-wise/Final Inspection
ISO 1940-1:2003
Mechanical vibration – Balancequality requirements for rotors in aconstant (Rigid)state
Cranes
Stage-wise/Final Inspection
IS 4470
Cranes – Test code & procedures
Heaters
Stage-wise/Final Inspection
API 560:2016
Fired Heaters for General RefineryService
Skid mounted system
Stage-wise/Final Inspection
OR Customer Requirements in the form of QAP mentioning required specification and scope mentioned in this scope. However the applicable National & International Codes and Standards shall be among those which are either referred in the scope statement or shall be equivalent to the standards described above for the relevant scope category
IAF Scope 19 a
Electrical Equipment
Transformers
Stage-wise/Final Inspection
IEC 60076-1: 2011
Power transformers- General
IEC 60076-2: 2011
Power transformers - Temperature rise for liquid-immersed transformers
IEC 60076-3: 2013
Part 3: Insulation levels, dielectric tests and external clearances in air
IEC 60076-4:2002
Part 4: Guide to the lightning impulse and switching impulse testing - Power transformers
IS 11171:1985
Specification for Dry Type Power Transformers
HT & LT motors
Stage-wise/Final Inspection
IEC 60034-2-1:2014
Rotating electrical machines - Part 2-1: Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles)
IS 4029:2010
Guide for Testing Three Phase
Induction Motors
Alternator
Stage-wise/Final Inspection
IEC 60034:2022
Rotating electrical machines
Power Cables & Instrumentation Cables
Stage-wise/Final Inspection
IEC 60840:2011
Power cables with extruded insulation and their accessories for rated voltages above 30 kV (Um = 36 KV) up to 150 kV (Um = 170 kV)–Test methods and requirements
EN 50288-7:2005
Multi-element metallic cables used in analogue and digital communication and control. Sectional specification for instrumentation and control cables
Primary cells & batteries
Stage-wise/Final Inspection
IS 1652:2013
Specification for stationary cells and Lead acid batteries with plante positive plates
IS 10918:2003
Vented type nickel cadmium
batteries
Battery Charger
Stage-wise/Final Inspection
IS 3895:1966
Specification for monocrystalline
semiconductor rectifier cells and stacks
IS 4540:1968
Specification for monocrystalline semi- conductor rectifier assemblies and equipments
Switch Gear Control gears
Panels
Stage-wise/Final Inspection
IEC 61439-2:2011
Low voltage switchgear and control gear assemblies
IS 8623-Part 1 to
3:1993
Low-Voltage Switchgear and Control gear Assemblies
SCADA
Stage-wise/Final Inspection
IEC 60870-5-101
Transmission Protocols - companion standards especially for basic tele control tasks
IEC 60870-5-104
Transmission Protocols - Network access for IEC 60870-5-101 using standard transport profiles
Insulators & bushings
Stage-wise/Final Inspection
IEC 60168:2001
Tests on indoor and outdoor post insulators of ceramic material or glass for systems with nominal voltages greater than 1000 V
IEC 60273:1990
Characteristic of indoor and outdoor post insulators for systems with nominal voltages greater than 1000 V
Junction Boxes
Stage-wise/Final Inspection
IEC 60529:2013
Degrees of protection provided by
enclosures (IP Code)
OR Customer Requirements in the form of QAP mentioning required specification and scope mentioned in this scope. However the applicable National & International Codes and Standards shall be among those which are either referred in the scope statement or shall be equivalent to the standards described above for the relevant scope category
IAF Scope 28
Construction
Buildings and
Green Audit of Educational Institutions
NBC Part 11 - 2016
National Building Code Part 11: Approach to Sustainability
Associated Infrastructure - Green Audit
NAAC Advisory number Ref. No. -F. No. 14-29/2022 dated 26.05.2022.
As per Client specific requirements and Applicable statutory requirements
The following offices of Competent Inspectorate and Consultants Pvt. Ltd are included under accreditation
Sl.No.
Office(s)
Address
Key activities performed
1
Main office
#104,203-Park View, Plot Nos 5 & 6, Pushpak Cooperative Housing Society Prashantinagar Industrial Estate, Kukatpally, Hyderabad - 500072, India
Top management functions, quality management system functions, administration & accounts, other key activities as applicable to main office.
Inspection contract review, Inspection planning & execution, Inspection personnel authorization & assignment, Issue of inspection reports / certificates.
