Prestressed concrete poles for overhead power traction and telecommunication lines - Specification


Precast Prestressed Concrete Street Lighting Poles

Customer requirements in the form of QAP, Approved Drawing, GTP etc. and technical specification which are generally based on National and International Codes and Standards, CEA, MNRE Guidelines etc.

Vendor Assessment, Stage wise/Final Inspection- -Review of Documents/ Records. -Inspection of Lot -Witness of Testing

Precast Concrete Pipes (with and without reinforcement)

Pre-Stressed Concrete Pipes ( incl. specials)

Customer requirements in the form of QAP, Approved Drawing, GTP etc. and technical specification which are generally based on National and International Codes and Standards, CEA, MNRE Guidelines etc.

Vendor Assessment, Stage wise/Final Inspection- -Review of Documents/ Records. -Inspection of Lot -Witness of Testing

Steel Tubes Used For Water Wells

Steel Tubes, Tubulars And Other Wrought Steel Fittings - Part 1 : Steel Tubes

Vendor Assessment, Stage wise/Final Inspection- -Review of Documents/ Records. -Inspection of Lot -Witness of Testing

Electroplated Coatings Of Zinc On Iron And Steel

Hot-dip Zinc Coatings on Structural Steel and other allied products

Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods.

Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods.

Metal Fittings of Insulators for Overhead Power Lines With Nominal Voltage Greater Than 1000 V: Part 1 General Requirements And Tests

Locking devices for ball and socket couplings of string insulator units - Dimensions and tests

Insulator and conductor fittings for overhead power lines. Performance and general requirements

Specification for telegraph material (insulators, pole fittings, etc.)

Hot Rolled Medium And High Tensile Structural Steel

Structural steels - Part 1: General technical delivery conditions for hot-rolled products/p>

Hot rolled products of structural steels. General technical delivery conditions

Tubular Steel Poles for Overhead Power Lines

Customer requirements in the form of QAP, Approved Drawing, GTP etc. and technical specification which are generally based on National and International Codes and Standards, CEA, MNRE Guidelines etc

Vendor Assessment, Stage wise/Final Inspection- -Review of Documents/ Records. -Inspection of Lot -Witness of Testing

Pumps - Vertical Turbine Mixed and Axial Flow, For Clear Cold Water.

Technical Requirements for Rotodynamic Special Purpose Pumps

Submersible Pumpsets – Specification

Openwell Submersible Pumpsets

Rotodynamic pumps -- Hydraulic performance acceptance tests -- Grades 1, 2 and 3

Customer requirements in the form of QAP, Approved Drawing, GTP etc. and technical specification which are generally based on National and International Codes and Standards, CEA, MNRE Guidelines etc

Vendor Assessment,
Stage wise/Final Inspection- -Review of Documents/
Records. -Inspection of Lot
-Witness of Testing

Distribution Transformers Up to And Including 2 500 KVA, 33kV - Specification Part 1 Mineral Oil Immersed

Power transformers: Part 1 general

Power transformers: Part 2 temperature - Rise

Power transformers: Part 3 insulation levels, dielectric tests and external clearances in air

Specification for power transformers: Part 4 terminal markings, tappings and connections

Power Transformers- Part 1: General

Power transformers - Part 2: Temperature rise for liquid-immersed transformers

Manual on Transformer

Customer requirements in the form of QAP, Approved Drawing, GTP etc. and technical specification which are generally based on National and International Codes and Standards, CEA, MNRE Guidelines etc.

Vendor Assessment,
Stage wise/Final Inspection-
-Review of Documents/ Records.
-Inspection of Lot
-Witness of Testing

Line operated three phase AC motors (IE Code) "Efficiency classes and performance specification"

Motors for Submersible Pump sets.

Rotating Electrical Machines Part 1 Rating and Performance













AC generators driven by reciprocating internal combustion engines - Specification: Part 1 alternators rated up to 20 KVA

AC generators driven by reciprocating internal combustion engines - Specification: Part 2 alternators rated above 20 KVA and up to 1250 KVA

Rotating electrical machines - Part 1: Rating and performance

Customer requirements in the form of QAP, Approved Drawing, GTP etc. and technical specification which are generally based on National and International Codes and Standards, CEA, MNRE Guidelines etc.

Vendor Assessment,
Stage wise/Final Inspection-
-Review of Documents/ Records.
-Inspection of Lot
-Witness of Testing

Manual on standardization

Ac Static Watt-hour Meters, Class 1 And 2

Electricity metering equipment (a.c.) - General requirements, tests and test conditions - Part 11: Metering equipment

Electricity metering equipment - Particular requirements - Part 21: Static meters for AC active energy (classes 0.5, 1 and 2)

AC Static Transformer Operated Watthour and Var-hour Meters, Class 0.2 S And 0.5 S

Electricity metering equipment (a.c.) - General requirements, tests and test conditions - Part 11: Metering equipment

Electricity metering equipment - Particular requirements - Part 22: Static meters for AC active energy (classes 0.1S, 0.2S and 0.5S)

Electricity metering equipment - Particular requirements - Part 23: Static meters for reactive energy (classes 2 and 3)

Electricity metering equipment - Particular requirements - Part 24: Static meters for fundamental component reactive energy (classes 0.5S, 1S, 1, 2 and 3)

AC Static Transformer Operated Watthour And Var-hour Meters, Class 0.2 S And 0.5 S

Electricity metering equipment (a.c.) - General requirements, tests and test conditions - Part 11: Metering equipment

Electricity metering equipment - Particular requirements - Part 22: Static meters for AC active energy (classes 0.1S, 0.2S and 0.5S)

Electricity metering equipment (a.c.) - Particular requirements - Part 23: Static meters for reactive energy (classes 2 and 3)

Alternating Current Direct Connected Static Prepayment Meters For Active Energy (Class 1 And 2)

Electricity metering - Payment systems - Part 31: Particular requirements - Static payment meters for active energy (classes 1 and 2)

A.C. Static Direct Connected Watthour Smart Meter Class 1 And 2 - Specification

AC static transformer operated watthour and var - Hour smart meters, class 0.2 S, 0.5 S and 1.0 S: Part 2 specification transformer operated smart meters

Digital Measuring Instruments for Measurement & Control: Part 1 General Specifications Concerning Terms, Tests & Data Sheet Details

Digital Measuring Instruments For Measurement & Control: Part 2 Terms, Tests & Data Sheet Details Of Instruments For Measuring Analog Quantities

Digital Measuring Instruments For Measurement & Control: Part 3 Terms, Tests & Data Sheet Details Of Instruments For Measuring Digital Quantities

Customer requirements in the form of QAP, Approved Drawing, GTP etc. and technical specification which are generally based on National and International Codes and Standards, CEA, MNRE Guidelines etc.

Vendor Assessment,
Stage wise/Final Inspection-
-Review of Documents/ Records.
-Inspection of Lot
-Witness of Testing

Methods of Test for Cables

Insulated Unsheathed--And Sheathed Cables/cords With Rigid And--Flexible Conductor For Rated Voltages-Up To And Including 1100 V

PVC Insulated (heavy Duty) Electric Cables: Part 1 For Working Voltages Upto And Including 1 100 V

PVC Insulated (Heavy Duty) Electric Cables - Part 2 : For Working Voltages From 3.3 KV Up To And Including 11 KV

Aerial Bunched Cables For Working Voltages Upto And Including 1100 Volts

Crosslinked Polyethylene Insulated PVC Sheathed Cables: Part 1 For Working Voltage Upto And Including 1100 V

Crosslinked Polyethylene Insulated Thermoplastics Sheathed Cables - Part 2 For Working Voltages From 3.3 KV Up To And Including 33 KV

Cross-linked Polyethylene Insulated Thermoplastic Sheathed Cables: Part 3 For Working Voltages From 66 KV Upto And Including 220 KV

Customer requirements in the form of QAP, Approved Drawing, GTP etc. and technical specification which are generally based on National and International Codes and Standards, CEA, MNRE Guidelines etc.

Vendor Assessment,
Stage wise/Final Inspection-
-Review of Documents/ Records.
-Inspection of Lot
-Witness of Testing

Round wire concentric lay overhead electrical stranded conductors

Aluminum Conductors For Overhead Transmission Purposes: Part 1 Aluminum Stranded Conductors

Aluminium Conductors For Overhead Transmission Purposes: Part 2 Aluminium Conductors, Galvanized Steel Reinforced

Aluminium Conductors For Overhead Transmission Purposes: Part 5 Aluminium Conductors - Galvanized Steel Reinforced For Extra High Voltage (400 KV And Above)

Aluminium Conductors For Overhead Transmission Purposes: Part 4 Aluminium Alloy Stranded Conductors (aluminium Magnesium Silicon Type)

Aluminium Alloy Redraw Rods For Electrical Purposes

Customer requirements in the form of QAP, Approved Drawing, GTP etc. and technical specification which are generally based on National and International Codes and Standards, CEA, MNRE Guidelines etc.

GETCO Technical Specification PGCIL Technical Specification SECTION-VII (VOLUME-II)

Standard Specification for Aluminum Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes

Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Supported (ACSS/TW)

Customer requirements in the form of QAP, Approved Drawing, GTP etc. and technical specification which are generally based on National and International Codes and Standards, CEA, MNRE Guidelines etc.

Vendor Assessment,
Stage wise/Final Inspection-
-Review of Documents/ Records.
-Inspection of Lot
-Witness of Testing

High-voltage switchgear and Controlgear - Part 1: Common specifications

High - Voltage Switchgear and Controlgear Part 100 Alternating - Current Circuit - Breakers

Customer requirements in the form of QAP, Approved Drawing, GTP etc. and technical specification which are generally based on National and International Codes and Standards, CEA, MNRE Guidelines etc.

Vendor Assessment, Stage wise/Final Inspection-
-Review of Documents/ Records.
-Inspection of Lot
-Witness of Testing

Low-Voltage Switchgear and Controlgear Assemblies Part 1 General Rules

Low Voltage Switch Gear and Controlgear Assemblies Part 2 Power Switch Gear and Control Gear Assemblies

Low-voltage Switchgear And Controlgear Assemblies - Part 2 : Particular Requirements For Busbar Trunking Systems (Busway)

Low-Voltage Switchgear And Controlgear Assemblies - Part 3 : Particular Requirements For Equipment Where Unskilled Persons Have Access For Their Use

High-voltage Switchgear and Controlgear - Part 102: Alternating current disconnectors and earthing switches

High-voltage Switchgear and Controlgear - Part 103: Switches for rated voltages above 1 kV up to and including 52 kV

High - Voltage Switchgear and Controlgear: Part 104 alternating current switches for rated oltages of 52 kV and above

High-voltage Switchgear and Controlgear - Part 104: Alternating current switches for rated voltages higher than 52 kV

High - Voltage fuses: Part 2 expulsion fuses (First Revision)

Customer requirements in the form of QAP, Approved Drawing, GTP etc. and technical specification which are generally based on National and International Codes and Standards, CEA, MNRE Guidelines etc.

Vendor Assessment, Stage wise/Final Inspection-
-Review of Documents/ Records.
-Inspection of Lot
-Witness of Testing

High-voltage switchgear and controlgear - Part 1: Common specifications

High-voltage switchgear and controlgear - Part 200: AC metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV

Customer requirements in the form of QAP, Approved Drawing, GTP etc. and technical specification which are generally based on National and International Codes and Standards, CEA, MNRE Guidelines etc.

Vendor Assessment, Stage wise/Final Inspection-
-Review of Documents/ Records.
-Inspection of Lot
-Witness of Testing

Current Transformers: Part 1 General Requirements.

Instrument transformers: Part 1 general requirements

Instrument Transformers Part 2 Additional Requirements For Current Transformers

Instrument transformers: Part 1 general requirements

Instrument transformers: Part 3 additional requirements for inductive voltage transformers

Instrument transformers: Part 5 additional requirements for capacitors voltage transformers

Instrument transformers: Part 4 additional requirements for combined transformers

Customer requirements in the form of QAP, Approved Drawing, GTP etc. and technical specification which are generally based on National and International Codes and Standards, CEA, MNRE Guidelines etc.

Vendor Assessment, Stage wise/Final Inspection-
-Review of Documents/ Records.
-Inspection of Lot
-Witness of Testing

Surge arresters: Part 4 metal - Oxide surge arresters without gaps for A.C. systems.

Customer requirements in the form of QAP, Approved Drawing, GTP etc. and technical specification which are generally based on National and International Codes and Standards, CEA, MNRE Guidelines etc.

Vendor Assessment, Stage wise/Final Inspection-
-Review of Documents/ Records.
-Inspection of Lot
-Witness of Testing

Porcelain Insulators For Overhead Power Lines With A Nominal Voltage Greater Than 1000 V

Insulators for overhead lines with a nominal voltage above 1000 V - Part 1: Ceramic or glass insulator units for a.c. systems - Definitions, test methods and acceptance criteria

Porcelain Insulators For Overhead Power Lines With A Nominal Voltage Up To And Including 1 000 V

Tests on indoor and outdoor post insulators of ceramic material or glass for systems with nominal voltages greater than 1 000 v

Porcelain Guy Strain Insulator

Hollow pressurized and unpressurized ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1 000 v

Insulators for overhead lines - Composite suspension and tension insulators for a.c. systems with a nominal voltage greater than 1000 Volts - Definitions, test methods and acceptance criteria

Customer requirements in the form of QAP, Approved Drawing, GTP etc. and technical specification which are generally based on National and International Codes and Standards, CEA, MNRE Guidelines etc.

Vendor Assessment, Stage wise/Final Inspection-
-Review of Documents/ Records.
-Inspection of Lot
-Witness of Testing

General requirements and methods of tests for lead - Acid storage batteries

Stationary cells and batteries, lead - Acid type (With Tubular Positive Plates) - Specification

Specification for vented type nickel cadmium batteries

Stationary valve regulated lead acid batteries – Specification

Customer requirements in the form of QAP, Approved Drawing, GTP etc. and technical specification which are generally based on National and International Codes and Standards, CEA, MNRE Guidelines etc

Vendor Assessment, Stage wise/Final Inspection-
-Review of Documents/ Records.
-Inspection of Lot
-Witness of Testing

Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1: Test requirements

Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-1: Special requirements for Testing of Crystalline Silicon Photovoltaic (PV) modules

Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-2: Special requirements for testing of thin-film Cadmium Telluride (CdTe) based photovoltaic (PV) modules

Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-3: Special requirements for testing of thin-film amorphous silicon based photovoltaic (PV) module

Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-4: Special requirements for testing of thin-film Cu(In,GA)(S,Se)2 based photovoltaic (PV) modules

Photovoltaic (PV) Module Safety Qualification

Customer requirements in the form of QAP, Approved Drawing, GTP etc. and technical specification which are generally based on National and International Codes and Standards, CEA, MNRE Guidelines etc.

Vendor Assessment, Stage wise/Final Inspection-
-Review of Documents/ Records.
-Inspection of Lot
-Witness of Testing

Self - Ballasted led lamps for general lighting services: Part 1 safety requirements

Self - Ballasted led lamps for general lighting services: Part 2 performance requirements (First Revision)

Luminaires: Part 1 general requirements and tests (First Revision)

Luminaires: Part 5 particular requirements: Sec 1 fixed general purpose luminaires

Luminaires: Part 5 particular requirements: Sec 2 recessed luminaires

Luminaires: Part 5 particular requirements: Sec 3 luminaires for road and street lighting

Luminaires: Part 5 particular requirements: Sec 5 floodlights

Customer requirements in the form of QAP, Approved Drawing, GTP etc. and technical specification which are generally based on National and International Codes and Standards, CEA, MNRE Guidelines etc.

Vendor Assessment, Stage wise/Final Inspection-
-Review of Documents/ Records.
-Inspection of Lot
-Witness of Testing

Optical fibre cables - Part 1-1: Generic specification – General

Characteristics of a single-mode optical fibre and cable

Customer requirements in the form of QAP, Approved Drawing, GTP etc. and technical specification which are generally based on National and International Codes and Standards, CEA, MNRE Guidelines etc

Main office

Top management functions, quality management system functions, administration & accounts, other key activities as applicable to main office.

Inspection contract review, Inspection planning & execution, Inspection personnel authorization & assignment, Issue of inspection reports / certificates.