IAF Scope 14
Plastic Products

Pressure Pipes

Stagewise/Final Inspection

IS 4985: 2000

Unplasticized PVC Pipes for Potable Water Supplies

IS 532: 2006

Bicycle tube valves and Valve tubing specifications.

ISO 1452-2: 2009

Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) -- Part 2: Pipes

ASTM D1785: 2015

Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120

ASTM D2241: 2015

Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)

DIN 8062: 2009-10

Unplasticized Polyvinyl Chloride(PVC-U) Pipes dimensions

AS/NZS 1477: 2006

PVC Pipes & Fittings for Pressure Applications

IS 15265:2003 & Departmental Specification

Flexible PVC Pipes or Polymer Reinforced Thermoplastic Hoses for Suction and Delivery Lines of Agricultural Pumps

IS 10151: 1982 (R2008)

Polyvinyl Chloride (PVC) and its Copolymers for its Safe Use in Contact with Foodstuffs, Pharmaceuticals and Drinking Water

PNS 65: 1993

Philippines National Standard no. PNS 65 : 1993 for Unplasticized PVC Pipes for Potable Water Supply

Or equivalent to the above standards with Latest edition and QAP/ITP and Client specification

Screen & Casing Pipe

Stagewise/Final Inspection

IS 12818: 2010

Unplasticized PVC-U Screen & Casing Pipes for Bore/tube well specifications.

ASTM F 480: 14

Standard Specification for Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), SCH 40 and SCH 80

DIN 4925: 2014-09

Unplasticized PVC-U for Tube Wells - Part 2: DN 100 To DN 200 with Trapezoidal Thread

DIN 4925-3:2012-10

Well Screens And Casings Of Unplasticized PVC-U for Tube Wells - Part 2: DN 250 To DN 400 with Trapezoidal Thread

Cable Duct Pipe

Stagewise/Final Inspection

IS 14787:2000 (RA 2005)

Unplasticized PVC Pipes (ducts) And Fittings For Underground Telecommunications Cable Installation Specification

SWR Pipe

Stagewise/Final Inspection

IS 13592:2013

Unplasticized PVC-U pipes for Soil & Water Discharge system for inside & outside buildings including ventilation & rain water system specifications

Pipe for Suction & Delivery

Stagewise/Final Inspection

IS 12231:1987

Unplasticized PVC-U pipes for use in Suction & Delivery Lines of Agricultural Pump sets.

Sure -- Loc. Screen & Casing Pipe

Stagewise/Final Inspection

ASTM D1785:2015

Standard Specification for PVC Plastic Pipe, Schedules 40, 80, and 120

ASTM D2241:2015

Standard Specification for PVC Pressure-Rated Pipe (SDR Series)

Sure -- Loc. Column Pipe

Stagewise/Final Inspection

ASTM D 1785:2015

Standard Specification for PVC Plastic Pipe, Schedules 40, 80, and 120

PVC - U Pipes for use in underground drainage and sewerage systems

Stagewise/Final Inspection

IS 15328:2003

PVC-U Pipes for use in underground drainage and sewerage systems

Fabricated PVC Fittings for Potable Water Supplies.

Stagewise/Final Inspection

IS 10124:2009

Fabricated PVC Fittings for Potable Water Supplies.

Injection Moulded PVC socket Fittings with Solvent Cement Joints for Water Supply

Stagewise/Final Inspection

IS 7834:1987

Injection Moulded PVC socket Fittings with Solvent Cement Joints for Water Supply.

PE Pipes & Fittings (HDPE/ MDPE/ LDPE) Polyethylene (PE) Pipes for Pressure and Gas Application

Stagewise/Final Inspection

IS 14885:2001

Polyethylene Pipes for the supply of Gaseous Fuels specifications

ENGSPEC/01/03-R4

Technical Specification for Polyethylene Pipe for Natural Gas OR any equivalent standards (All the above standards with latest amendments)

BSNL Spec. (GR/DWC- 34/01SEP 2007)

BSNL Technical specifications for HDPE duct pipes

IS:14930 (Part-1):2001 amendment no. 2 April:2011

Conduit Systems for Electrical Installations

IS:14930 (Part-2):2001

Conduit Systems for Electrical Installations

PR EN 13476 -1: 2007 (E), PR EN 13476 -2: 2007 (E), EN 13476- 3:2007+A1:2009

Plastics Piping Systems for Non- Pressure underground drainage and sewerage-structured-wall system of unplasticized poly (vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - part 2: specifications for pipes and fittings with smooth internal and external surface

HDPE Pressure Pipes

Stagewise/Final Inspection

IS 4984: 1995 (PE 63, 80 &100), (RA 2008)

High Density Polyethylene pipes for potable water supplies

DIN 8074 : 2011-12 (PE 63,80 & 100)

Polyethylene (PE) - Pipes PE 80,PE 100 Dimensions

ASTM D2104 -03

Standard Specification for Polyethylene (PE) Plastic Pipe, Schedule 40

ASTM D2239:2012

Standard Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter

ASTM D2447-03

Standard Specification for Polyethylene (PE) Plastic Pipe, Schedules 40 and 80, Based on Outside Diameter ( Withdrawn 2010)

ASTM D2737:2012

Standard Specification for Polyethylene (PE) Plastic Tubing

ASTM D3035:2014

Standard Specification for Polyethylene Plastics Pipe and Fittings Materials

ASTM F714:2013

Standard Specification for Polyethylene (PE) Plastic Pipe (DR- PR) Based on Outside Diameter

HDPE Sprinkler Pipe Plastic Piping Systems Polyethylene (PE) Pipes for Water Supply

Stagewise/Final Inspection

IS 14151 (Part1):1999

Irrigation Equipment Sprinkler Pipes specifications. Part 1: Polyethylene Pipes

IS 14151 (Part2):2008

Equipment -Sprinkler Pipes specifications. Part-2 : Quick Coupled Polyethylene Pipes and fittings

Or equivalent to the above standards with Latest edition and QAP/ITP and Client specification

Sewerage Pipe

Stagewise/Final Inspection

BS EN 12201-1:2003

Plastic piping systems for water supply. Polyethylene (PE). General

BS EN 12201- 2:2011+A1:2013 (PE 63, 80 & 100 )

Plastics piping systems for water supply, and for drainage and sewerage under pressure. Polyethylene (PE) Pipes

Or equivalent to the above standards with Latest edition and QAP/ITP and Client specification

PLB HDPE Duct

Stagewise/Final Inspection

IS 14333 :96 (RA 2001) (PE 63, 80 & 100)

High Density Polyethylene Pipes for sewerage specifications Or equivalent to the above standards with Latest edition and QAP/ITP and Client specification

HDPE Double Wall Corrugated (DWC)Pipe

Stagewise/Final Inspection

BSNL Spec. (TEC/GR/TX/CDS-008/03/March 2011)

BSNL Technical specifications for HDPE duct pipes Or equivalent to the above standards with Latest edition and QAP/ITP and Client specification

Polyethylene (PE)Pipes for Pressure Application

Stagewise/Final Inspection

AS/NZS 4130: 2009

Polyethylene (PE) Pipes for Pressure Applications

AS/NZS 5065 : 2005

Polyethylene and polypropylene pipes and fittings for drainage and sewerage applications

Or equivalent to the above standards with Latest edition and QAP/ITP and Client specification

Fabricated and Machined HDPE Fittings for Potable Water Supplies

Stagewise/Final Inspection

IS 8360 (Part 1 to 3) : 1977 (RA 2002)

Specifications for fabricated High Density Poly Ethylene. (HDPE) fittings for potable water supplies Or equivalent to the above standards with Latest edition and QAP/ITP and Client specification

Injection Moulded HDPE Fittings for Water Supply

Stagewise/Final Inspection

IS 8008 (Part 1 to 9): 2003

Injection Moulded/Machined High Density Poly Ethylene HDPE Fittings for Potable Water Supply.

HDPE Fittings for Potable Water Supplies

Stagewise/Final Inspection

BS EN 12201-3:2011+A1: 2012

Plastics piping systems for water supply, and for drainage and sewerage under pressure. Polyethylene (PE). Fittings

ISO - 4427- 3: 2007

Plastic \ Piping Systems- Polyethylene PE Pipes & Fittings for water supply. OR any equivalent standards (All the above standards with latest amendments)

ISO 14236: 2000

Plastics pipes and fittings-Mechanical-joint compression fittings for use with polyethylene pressure pipes in water supply systems

Or equivalent to the above standards with Latest edition and QAP/ITP and Client specification

Low Density Polyethylene Pipes

Stagewise/Final Inspection

IS 3076: 1985

Low Density Polyethylene Pipes for Potable Water Supplies

IS 13488: 1992

Emitting Pipes System

IS 12786: 1989

Irrigation Equipment - Polyethylene Pipes for Irrigation Laterals

BS EN 1555-3: 2010

Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) Fittings

ISO 12162: 2009

Thermoplastics materials for pipes and fittings for pressure applications -- Classification, designation and design coefficient

Or equivalent to the above standards with Latest edition and QAP/ITP and Client specification

EF Fittings - (Couplers , Tapping Tee, End Cap, Reducer, Equal Tee, Transition fitting, Elbow)

Stagewise/ Final Inspection

BS EN 1555-3: 2010

Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) Fittings

BS EN 12201- 3:2011+A1: 2012

Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) Fittings Polyethylene (PE). Fittings

ISO 13954: 1997

Plastics pipes and fittings \-- Peel decohesion test for polyethylene (PE) electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm

ISO 13955: 1997

Plastics pipes and fittings \-- Crushing decohesion test for polyethylene (PE) electrofusion assemblies

Low Density Polyethylene Pipes

Stagewise/ Final Inspection

IS 3076: 1985

Low Density Polyethylene Pipes for Potable Water Supplies

IS 13488: 1992

Emitting Pipes System

IS 12786: 1989

Irrigation Equipment - Polyethylene Pipes for Irrigation Laterals

BS EN 1555-3 :2010

Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) Fittings

ISO 12162 :2009

Thermoplastics materials for pipes and fittings for pressure applications -- Classification, designation and design coefficient

Or equivalent to the above standards with Latest edition and QAP/ITP and Client specification

Client Requirements in the form of QAP mentioning required specification and scope mentioned in this scope. However, the applicable National & International Codes and Standards shall be among those which are either referred in the scope statement or shall be equivalent to the standards described above for the relevant scope category

IAF Scope 17
Basic Metals and Fabricated Metal Products

Pipes and Tubes (Straight Tube & U-Tube (Seamless and Welded))

Stagewise/ Final Inspection

ASME SA106: 2015

Specification for seamless carbon steel pipe for high temperature service

ASME SA179: 2015

Specification for seamless cold drawn low carbon steel heat exchanger and condenser tubes

ASME SA213: 2015

Specification for seamless ferritic and austenitic alloy steel boiler, super heater, and heat exchanger tube

BSEN10217: 2014

Welded steel tubes for pressure purpose

ASME SA 214: 2015

Specification for electric resistance welded carbon steel heat exchanger and condenser tubes

ASME SA 250: 2015

Specification for electric resistance welded ferritic alloy steel boiler and super heater tubes

ASME SA 312: 2015

Specification for seamless, welded, and heavily cold worked austenitic stainless steel pipes

ASME SA 333: 2015

Specification for seamless and welded steel pipe for low temperature service

ASME SA334: 2015

Specification foe seamless and welded carbon and alloy steel tubes for low temperature service

ASME SA 672: 2015

Specification for electric fusion welded steel pipe for high pressure service at moderate temperature Petroleum, petrochemical and natural gas industries \-- Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments

ASTM A999 / A999M -- 17

Standard Specification for General Requirements for Alloy and Stainless Steel Pipe

IS 1161: 2014

Steel Tubes for Structural Purposes -- Specification

IS 3601: 2006

Steel Tubes for Mechanical and General ENG\~EEWG Purposes --- Specification

ASTM A 178: 2015

Specification for Electric-Resistance- Welded Carbon Steel and Carbon- Manganese Steel Boiler and Super heater Tubes

ASTM A 179: 2015

Specification for Seamless Cold- Drawn Low-Carbon Steel Heat- Exchanger and Condenser Tubes

ASTM A 192: 2015

Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service

ASTM A 209: 2015

Specification for Seamless Carbon- Molybdenum Alloy-Steel Boiler and Super heater Tubes

ASTM A 213: 2015

Specification for Seamless Ferritic and Austenitic Alloy- Steel Boiler, Super heater, and Heat-Exchanger Tubes

ASTM A 214: 2015

Specification for Electric-Resistance- Welded Carbon Steel Heat- Exchanger and Condenser Tubes

ASTM A 249: 2015

Specification for Welded Austenitic Steel Boiler, Super heater, Heat- Exchanger, and Condenser Tubes

API 5CT: 2011

Specification for Casing and Tubing

EN 10255: 2004

Non-alloy steel tubes suitable for welding and threading. Technical delivery conditions

IS 3589: 2001

Steel Pipes for Water and Sewage

Tubing (Non-Ferrous)

Stagewise/ Final Inspection

ASTM B-111: 2015

Spec for Copper and Copper alloy seamless condenser tubes and ferrule stock

ASTM B-135: 2015

Specification for seamless brass tubes

ASTM B-161

Specification for nickel seamless pipe and tube

ASTM B-163: 2015

Specification for seamless nickel and nickel alloy condenser and heat exchangers tubes

ASTM B-165: 2015

Specification for nickel-copper alloy seamless pipe and tubes

BS 2871: 1972

Specification for copper and copper alloy, tubes for general purpose

Or equivalent to the above standards with latest edition and QAP/ITP and Client Specification.

Ductile Iron Pipes

Stagewise/ Final Inspection

BS EN 545: 2010

Ductile iron pipes, fittings, accessories and their joints for water pipelines

BS EN 598: 2007+A1: 2009

Ductile iron pipes, fittings, accessories and their joints for sewerage applications

IS 8329: 2000

Centrifugally cast (spun) ductile iron pressure pipes for water, gas and sewage - specification

ISO 2531: 2009

Ductile iron pipes, fittings, accessories and their joints for water application

ASTM A 746: 2015

Standard Specification for Ductile Iron Gravity Sewer Pipe

Or equivalent to the above standards with latest edition and QAP/ITP and Client Specification

Storage Tanks

Stagewise/ Final Inspection

API 620

Design & construction of large welded low pressure tanks,

API 650

Welded tanks for Oil Storage

IS 803: 1976

Code of practice for design, fabrication and erection of vertical mild steel cylindrical welded oil storage tank

IS 10987: 1992

Code of fabrication, Practice for design, testing and installation, of under-ground/above- ground horizontal cylindrical steel storage tanks for petroleum products

ASME Sec VIII 2015

Rules for construction of pressure vessels

Or equivalent to the above standards with latest edition and QAP/ITP and Client Specification.

Welded Structures for Onshore and Offshore Purpose

Stagewise/ Final Inspection

AWS D 1.1

Structural welding code -- Steel Or equivalent to the above standards with latest edition and QAP/ITP and Client Specification

Piping fabrication, installation & testing

Stagewise/ Final Inspection

ASME B 31.1

Power Piping

ASME B 31.3

Process Piping

Or equivalent to the above standards with latest edition and QAP/ITP and Client Specification

Metallic Hose Assemblies

Stagewise/ Final Inspection

BS4089: 1999

Specification for metallic hose assemblies for liquid petroleum gases and liquefied natural gases

Or equivalent to the above standards with latest edition and QAP/ITP and Client Specification

Plates

Stagewise/ Final Inspection

ASME SA516: 2015

Specification for pressure vessel plates, carbon steel, for moderate and lower temperature service

ASME SA 515: 2015

Specification for pressure vessel plates, carbon steel, for intermediate and higher temperature service.

ASME SA 285: 2015

Specification for pressure vessel plates, carbon steel, low alloy and intermediate tensile strength

ASME SA 387: 2015

Specification for pressure vessel plates, alloy steel, chromium molybdenum

IS 2041: 2009

Steel Plate for Pressure Vessel used at moderate and low temperature

Or equivalent to the above standards with latest edition and QAP/ITP and Client Specification

Castings

Stagewise/ Final Inspection

ASME SA216: 2015

Specification for Steel Castings, carbon, suitable for fusion welding for high temperature service

ASME SA217: 2015

Specification for steel castings, martensitic stainless and alloy, for pressure-containing parts, suitable for high-temperature service

ASME SA352: 2015

Specification for steel castings, ferritic and martensitic, for pressure containing parts, suitable for low temperature service

BS3100: 1991

Steel castings for general engineering purpose

BSEN 10293: 2005

Steel castings for general engineering uses

IS 1030: 1998

Carbon steel castings for general engineering purposes - specification

IS 2644: 1994

High strength steel castings for general engineering and structural purposes-specification

IS 1865: 1991

Iron Castings with Spheroidal or Nodular Graphite - Specification

ASTM A 915: 2015

Steel Castings, Carbon and Alloy, Chemical Requirements Similar to Standard Wrought Grades

ASTM A 958: 2015

Steel Castings, Carbon and Alloy, with Tensile Requirements, Chemical Requirements Similar to Standard Wrought Grades

ASTM A 781: 2015

Standard Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use

Forgings

Stagewise/ Final Inspection

ASME SA105: 2015

Specification for carbon steel Forgings for piping application,

ASME SA182: 2015

Specification for forged or rolled alloy and stainless steel pipe flanges, forged fittings, and valves and parts for high-temperature service

ASME SA350: 2015

Specification for carbon and low alloy steel forgings, requiring notch toughness testing for piping components

BSEN10250: 2000

Open die steel forgings for general engineering purpose

BS4670: 1971

Specification for alloy steel forgings

SA965: 2015

Specification for steel forgings, austenitic, for pressure and high temperature parts

IS 2004: 1991

Carbon steel forgings for general engineering purposes-specification

ASTM A 788: 2015

Standard Specification for Steel Forgings, General Requirement

ASTM A 336: 2015

Alloy Steel Forgings for Pressure and High-Temperature Parts

ASTM A 372: 2015

Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels

Or equivalent to the above standards with latest edition and QAP/ITP and Client Specification

Line pipes

Stagewise/ Final Inspection

API 5L, 45th Edition 2012, Includes Errata (2015)

Specification for line pipe Or equivalent to the above standards with Latest edition and QAP/ITP and Client specification

Fittings & Flanges

Stagewise/ Final Inspection

ASME SA 234: 2015

Specification for pipe fittings of wrought carbon steel and alloy steel for moderate and high temperature service

ASME SA420: 2015

Specification for piping fittings of wrought carbon steel and alloy steel for low temperature service

ASTM A 234: 2015

Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service

ASTM A 182: 2015

Specification for Forged or Rolled Alloy-Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service

EN 877: 1999

Specification for Cast Iron Pipes and fittings

ASTM A 420: 2015

Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service

ASTM A 403: 2015

Specification for Wrought Austenitic Stainless Steel Piping Fittings

ASTM A 758: 2015

Specification for Wrought-Carbon Steel Butt-Welding Piping Fittings with Improved Notch Toughness

ASTM A 774: 2015

Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures

Or equivalent to the above standards with latest edition and QAP/ITP and Client Specification

Fasteners

Stagewise/ Final Inspection

ASME SA 193: 2015

Specification for alloy steel and stainless steel bolting materials for high temperature or high pressure service and other special purpose applications.

ASME SA 194: 2015

Specification for carbon and alloy steel nuts for bolts for high pressure or high temperature service or both.

ASME SA 320: 2015

Specification for alloy steel and stainless steel bolting for low temperature service

ASME SA 540: 2015

Specification for alloy steel bolting for special application.

Or equivalent to the above standards with latest edition and QAP/ITP and Client Specification

Client Requirements in the form of QAP mentioning required specification and scope mentioned in this scope. However, the applicable National & International Codes and Standards shall be among those which are either referred in the scope statement or shall be equivalent to the standards described above for the relevant scope category

IAF Scope 18
Machinery and Equipment

All Types of Valves (all Materials-Size & Class)

Stagewise/ Final Inspection

API 602, 10th Edition: 2015

Gate, globe, and check valves for sizes DN100 (NPS4) and smaller for the petroleum and natural gas industries.

API 603, 9th Edition: 2018

Corrosion-resistant, bolted bonnet gate valves-flanged and butt-welding ends

BS EN ISO 10434: 2020

Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries

API 600, 14th Edition, 2021

Steel Gate Valves - Flanged and Butt-welding Ends, Bolted Bonnets

BS EN 1984: 2010

Industrial valves. Steel gate valves

BS EN 12516-1:2014+A1: 2018

Industrial valves. Shell design strength Tabulation method for steel valve shells

ASME B16.34: 2020

Valves---Flanged, Threaded, and Welding End

API 6D:24th Edition, 2014

Specification for Pipeline and Piping Valves

API 6A: 21st Edition 2019

Specification 6A, Wellhead and Tree Equipment.

API 594 8th Edition 2017

Check Valves: Flanged, Lug, Wafer, and Butt-welding

API 608- 6th Edition 2020

Metal Ball Valves -Flanged, Treaded and welding ends

API 609: 9th Edition 2021

Butterfly Valves -- Double Flanged, Lug and Wafer type

API 598: 2016 10th Edition

Valve Inspection and Testing

IS 9890 : 1981

Specification for general purpose ball valves

BS EN12266-1 : 2012

Testing of metallic valves.

EN 12516 : 2014

Industrial valves. Shell design strength. Calculation method for steel valve shells.

API 526-7th Edition: 2017

Flanged Steel Pressure Relief Valves.

API 603- 9th Edition: 2018

Corrosion Resistant Bolted Bonnet Gate Valves.

API 6A -4th Edition includes Errata 1 & 2: (2018)

Specification for Fire Test Valves

API 694-8th Edition: 2017

Check Valves Flanged Lug and Wafer Type and Butt Welding

API 607: 2016; API 6FA: 2020

Fire Test for soft seated Quarter Turn Valves

ISO 10497

Testing of valves - Fire type-testing requirements

API 624: 2014

Type Testing of rising Stem Valves quipped with Graphite packing

API 641: 2016

Type Testing of quarter turn Valves for Fugitive Emissions

ISO 15848-1: 2015

Helium Fugitive Emission Test for Industrial Valves.

BS EN 12266-1 -2012

Testing of metallic valves.

EN 1626: 2008

Valves for cryogenic service

ISO 21011: 2008

Valves for cryogenic service; specifies the requirements for the design, manufacture and testing of valves for a rated temperature of -40 °C and below (cryogenic service)

BS 6364: 1991

Standard specifies the requirements for the design, manufacture and testing of valves for cryogenic service

API 591: 2019

Process Valve Qualification Procedure

API 17D: 2021

Design and Operation of Subsea Production Systems -Subsea Wellhead and Tree Equipment

MESC SPE 77/300: 2012

Procedure and technical specification for type acceptance testing (TAT) of industrial valves

MESC SPE 77/312 : 2019

Fugitive emission production testing (amendments/supplements to ISO 15848-2)

EN 334: 2019

Gas pressure regulators for inlet pressures up to 100 bars

EN 593: 2017

Industrial valves - Metallic butterfly valves for general purpose

EN 1171: 2015

Industrial valves --- Cast iron gate valves

EN 1349: 2009

Industrial process control valves

EN 1983: 2013

Industrial valves --- Steel ball valves

EN 1984: 2010

Industrial valves --- Steel gate valves

EN 12284: 2003

Refrigerating systems and heat pumps --- Valves --- Requirements, testing and marking

EN 12288: 2010

Industrial valves --- Copper alloy gate valves

EN 16767: 2020

Industrial valves --- Metallic check valves

EN 13397: 2001

Industrial valves --- Diaphragm valves made of metallic materials

EN 13709: 2010

Industrial valves --- Steel globe and globe stop and check valves

EN 13789: 2010

Industrial valves --- Cast iron globe valves

OR any equivalent standards (All the above standards with latest amendments ) Other applicable National / International Specifications / Standards / Client specific requirements)

Pumps (All Types & Size)

Stagewise/ Final Inspection

IS 6595: Part 1: 2002

Horizontal Centrifugal Pumps for Clear, Cold Water- Specification

IS 6595: Part 2: 2002

Horizontal Centrifugal Pumps for clear, cold water (other than agricultural and rural water supply purposes)

IS 9137: 1978

Code for Acceptance Tests for Centrifugal, Mixed Flow and Axial Pumps-Class C

IS 11745: 1986

Technical supply conditions for positive displacement pumps-reciprocating

API 610: 2021

Centrifugal Pumps for Petroleum, Petrochemical and Natural gas industries

API 674: 2016

Positive Displacement Pumps -- Reciprocating

API 685: 2011

Seal less Centrifugal Pumps for Petroleum, Heavy duty chemical and Gas Industry services

API 675: 2021

Positive Displacement Pumps-Controlled Volume for Petroleum, Chemical, and Gas Industry Services

IS 5120: 1977

Technical requirements for roto dynamic special purpose pumps

IS 1710: 1989

Pumps - Vertical Turbine Mixed and Axial Flow, For Clear Cold Water

OR any equivalent standards (All the above standards with latest amendments) Other applicable National / International Specifications / Standards / Client specific requirements)

Metallic Gasket (All Types & Size)

Stagewise/ Final Inspection

ASTM A240 SS316L

Standard Specification for Heat-Resisting Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels1

IS1079 Gr Hr3

Hot Rolled Carbon Steel Sheet And Strip

Bearing (All Types & Size)

Stagewise/ Final Inspection

ASTM F2443:04:2012

Standard specification for roller, bearing, needle, ferrous, solid, spherical end

IS 14691: 1999

Rolling Bearings - Taper Rolling Bearings - Tapered Roller: Metric Series

IS 14347: 1996

Plummer block housing

IS 14802: 2000

Plain bearings -Hardness testing of bearing metals

IS 13962: 1994

Rolling bearings - metric tapered roller bearings - designation system

API 613: 2003

Special Purpose Gear Units for Petroleum, Chemical and Gas Industry Services

API 677: 2016

General Purpose Gear Units for Petroleum, Chemical and Gas Industry Services OR any equivalent standards (All the above standards with latest amendments) Other applicable National / International Specifications / Standards / Client specific requirements)

All type of Pressure Regulation Skids (MRS, DRS, PRS, IMS, SRM) (All Types & Size)

Stagewise/ Final Inspection

ASME B 31.3: 2020

Process Piping & Piping Skids

ASME B 31.8: 2020

Gas Transmission and distribution piping system

OR any equivalent standards (All the above standards with latest amendments) Other applicable National / International Specifications / Standards / Client specific requirements)

Gas / Service Regulator (All Types & Size)

Stagewise/ Final Inspection

BS EN 88-2: 2007

Pressure Regulators and Associated Safety Devices for Gas Appliances. Pressure Regulators for Inlet Pressures Above 500 Mbar Up To And Including 5 Bar (British Standard)

Odorizing system (All Types & Size)

Stagewise/ Final Inspection

As per Client Tech. Specification

CNG Cascade (All Types & Size)

Stagewise/ Final Inspection

IS 7285: 2018

Specification for Refillable Seamless Steel Gas Cylinders

CNG Dispenser

EN 13617-1: 2012

Construction and performance of metering pumps, dispensers and remote pumping units

Client Requirements in the form of QAP mentioning required specification and scope mentioned in this scope. However, the applicable National & International Codes and Standards shall be among those which are either referred in the scope statement or shall be equivalent to the standards described above for the relevant scope category

IAF Scope 19
Electrical Equipment

Transformers (All Types & Size) (HV & LV))

Stagewise/ Final Inspection

IS 2026 Part 1 to 8: 2009

Power Transformers

IS 2026: Part 1: 2012

Power Transformers: Part 1: General

IS 2026: Part 2: 2010

Power Transformers: Part 2: Temperature Rise

IS 2026: Part 3: 2009

Power Transformers: Part 3: Insulation levels, dielectric tests and external clearances in air

IS 2026: Part 4: 1977

Power Transformers: Part 4: Terminal markings, tappings and connections

IS 2026: Part 5: 2011

Power Transformers: Part 5 Ability to withstand short circuit

IEC 60076:1: 2011

Power Transformers: Part 1: General

IEC 60076:2: 2011

Power Transformers: Part 2: Temperature rise for liquid-immersed transformers

IEC 60076:3: 2013

Power Transformers: Part 3: Insulation levels, dielectric tests and external clearances in air

IEC 60076:4: 2002

Power Transformers: Part 4: Guide to the lightning impulse and switching impulse testing

IEC 60076:5: 2006

Power Transformers: Part 5: Ability to withstand short circuit

IS 11171: 1985

Specification for Dry Type Power Transformers

IS:2705 (Part 1): 1992

Current Transformers-Specification-Part 1: General Requirements

IS:2705 (Part 2): 1992

Current Transformers -Specification-Part 2: Measuring Current Transformers

IS:2705 (Part 3): 1992

Current Transformers -Specification-Part 3: Protective Current Transformers

IS:2705 (Part 4): 1992

Current Transformers -Specification-Part 4: Protective Current Transformers for special purpose applications

IEC: 61869-2: 2012

Instrument transformers - Part 2: Additional requirements for current transformers

IS: 3156 (Part 1): 1992

Voltage Transformers -Specification-Part 1: General Requirements

IS: 3156 (Part 2): 1992

Voltage Transformers -Specification-Part 2: Measuring Voltage Transformers

IS: 3156 (Part 3): 1992

Voltage Transformers -Specification-Part 3: Protective Voltage Transformers

IS: 3156 (Part 4): 1992

Voltage Transformers -Specification-Part 4: Capacitor Voltage Transformers

IEC: 61869-3: 2011

Instrument transformers - Part 3: Additional requirements for inductive voltage transformers

OR any equivalent standards (All the above standards with latest amendments) Other applicable National / International Specifications / Standards / Client specific requirements.)

Motors (All Capacity and Types) (HT & LT)

Stagewise/ Final Inspection

IS 12615: 2018

Energy efficient Induction Motors-Three-phase Squirrel cage

IEC 60034-2-1: 2014

Rotating electrical machines - Part 2-1: Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles)

IS 7538: 1996

Three-phase squirrel cage induction motors for centrifugal pumps for agricultural applications

IS 12066: 1987, (RA 2009)

Three-phase Induction Motors for Machine Tools

IS 4029, Rev1: 2010, (RA 2016)

Guide for Testing Three Phase Induction Motors

IS 12065, Rev1: 1987, (RA 2009)

Permissible limits of noise level for rotating electrical machines

IS 12075, Rev1: 2008, (RA 2013)

Mechanical Vibration of Rotating Electrical Machines with Shaft Heights 56 mm and Higher - Measurement, Evaluation and Limits of Vibration Severity

IEC 60079: 2017

Explosive atmosphere (Only Label and TC Review)

OR any equivalent standards (All the above standards with latest amendments) Other applicable National / International Specifications / Standards / Client specific requirements)

Wires and Cables (All Types & Capacity) (HT & LT)

Stagewise/ Final Inspection

IS 7098 Part 1: 1988

Power cables Specification for cross linked polyethylene insulated PVC sheathed cables Part 1: for working voltages up to and including 1100 Volts

IS 7098 Part 2: 2011

Cross linked polyethylene insulated thermoplastic sheathed cables Part 2: for working voltages from 3.3 KV up to and including 33 KV

IS 7098 Part 3: 1993

Cross linked polyethylene insulated thermoplastic sheathed cables Part 3: for working voltages from 66 KV up to and including 220 KV

IEC 60502 (Part 1): 2004

Power cables with extruded insulation and their accessories for rated voltages from 1 KV (Um = 1,2 KV) up to 30 KV (Um = 36 KV) -- Part 1:Cables for rated voltages of 1 KV ((Um = 1,2 KV) and 3 KV (Um = 3,6 KV)

IEC 60502 (Part 2): 2014

Power cables with extruded insulation and their accessories for rated voltages from 1 KV (Um = 1,2 KV) up to 30 KV (Um = 36 KV) - Part 2: Cables for rated voltages from 6 KV (Um = 7,2 KV) up to 30 KV (Um = 36 KV)

IEC 60840: 2011

Power cables with extruded insulation and their accessories for rated voltages above 30 KV (Um = 36 KV) up to 150 KV (Um = 170 KV) - Test methods and requirements

BS 6622: 2007

Electric cables: Armoured cables with thermosetting insulation for rated voltages from 3.8/6.6 KV to 19/33 KV

BS 5467:1997: 2008

Electric cables. Thermosetting insulated, armoured cables for voltages of 600/1000 V and 1900/3300 V

IS 694: 2010

Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 450/750V

IS 1554 (Part 1): 1988

Specification for PVC insulated (Heavy Duty) Electric Cables. Part 1: for working voltages up to and including 1100 Volts

IS 1554 (Part 2): 1988

Specification for PVC insulated (Heavy Duty) Electric Cables. Part 1: for working voltages from 3.3 KV up to and including 11 KV

IEC 60227 (Part 1): 2007

Poly Vinyl Chloride insulated cables of rated voltages up to and including 450/750 V - Part 1: General requirements

BS 6346: 1997

Electric cables. PVC insulated, armoured cables for voltages of 600/1000 V and 1900/3300 V

IS/IEC 60794: PART 1: SEC :1: 2001

Optical Fiber Cables: Part 1 Generic Specification: Section 1 General

IS/IEC 60794: Part 2: 2002

Optical Fiber Cables Part 2 Indoor Cables - Sectional Specification

IEC 60331-1: 2018

Tests for electric cables under fire conditions - Circuit integrity - Part 1 OR any equivalent standards (All the above standards with latest amendments ) Other applicable National / International Specifications / Standards / Client specific requirements)

Control Panels (All types, Size and Capacity) (HT & LT)

Stagewise/ Final Inspection

IS 13703: 1993, (RA 2014)

Low-voltage fuses for voltages not exceeding 1000 V AC or 1500 V DC

IS 12083: 1986, (RA 2016)

Electrical Relays

IS 12021, rev1: 2015

Control Transformers for Switchgear and Controlgear for Voltages Not Exceeding 1000 V a.c. -- Specification

IS 8686: 1977, (RA 2016)

Static protective relays

IS 13947 (Part 1): 2004

Specification For Low-Voltage Switchgear And Controlgear - Part 1: General Rules

IEC 60947-1: 2007

Specification For Low-Voltage Switchgear And Controlgear - Part 1: General Rules

IS 12729: 2004

Common Specification for High Voltage Switchgear and control gear standards

IEC 62271-1: 2007

High Voltage Switchgear and control gear Part 1: Common Specifications

IEC 60694: 2002

Common Specification for High Voltage Switchgear and control gear standards

OR any equivalent standards (All the above standards with latest amendments) Other applicable National / International Specifications / Standards / Client specific requirements)

Client Requirements in the form of QAP mentioning required specification and scope mentioned in this scope. However, the applicable National & International Codes and Standards shall be among those which are either referred in the scope statement or shall be equivalent to the standards described above for the relevant scope category

IAF Scope 26
Gas and Petroleum supply

Gas Supply-NGPL with item 26-A (iii) of NABCB Sub-sector categorization document BCB 503 (O&G)

Stagewise / In-service

PNGRB's GSR 808(E) dated 11.11.2009 along with latest amendments, national/ international standards mentioned therein and relevant statutes

PNGRB's "Technical Standards and Specifications including Safety Standards for Natural Gas Pipelines" Regulations, 2009

Gas Supply-CGD with item 26-B (iii) of NABCB Sub-sector categorization document BCB 503 (O&G)

Stagewise / In-service

PNGRB's GSR 612(E) dated 27.08.2008 along with latest amendments, national/ international standards mentioned therein and relevant statutes

PNGRB's "Technical Standards and Specifications including Safety Standards for City or Local Natural Gas Distribution Network" Regulations, 2008

Gas Supply -- NGPL with item 26-C(i) of NABCB Sub-sector categorization document BCB 503 (O&G)

In-service

PNGRB's Infra/IM/NGPL/1/2010 dated 05.11.2012 along with national/ international standards mentioned therein and relevant statutes

PNGRB's "Integrity Management System for Natural Gas Pipelines" Regulations, 2012

Gas Supply -- CGD with item 26-C(ii) of NABCB Sub-sector categorization document BCB 503 (O&G)

In-service

PNGRB's Infra/IMP/CGD/1/2013 dated 16.05.2013 along with national/ international standards mentioned therein and relevant statutes

PNGRB's "Integrity Management System for City or Local Natural Gas Distribution Network" Regulations, 2013

IAF Scope 31
Transport, storage and communication

LPG Bottling, Over Ground/ Mounded / Refrigerated / Cavern Storage and Transport by Tank Truck with items-31(v) of NABCB Sub-sector categorization document BCB 503 (O&G)

In-service

PNGRB's F. No. PNGRB/Tech/6-T4SLPG/(1)/2019. dated 15th February 2019 along with national/ international standards mentioned therein and relevant statutes

PNGRB's "Technical Standards and Specifications including Safety Standards for LPG Storage, Handling and Bottling Facilities" Regulations, 2019.