NABCB Accredited Inspection Bodies
Apave Assessments India Pvt. Ltd.
Address Unit No. 276-280, Building No. C-7,
Bhumi World Industrial Park, Pimplas,
Mumbai Nashik Highway, Bhiwandi - 421 302, India
Contact Person Mr. Anoop Kumar Pattani
Designation Head Certification
Tel 011 46018935
Fax 011 46018935
Email ID anoop.kumar@apave.com
Website www.apaveindia.com
Accreditation Cert. No.. IB 034
Valid From 22 August 2016
Valid Upto 21 Nov 2023
Accreditation Standard ISO/IEC 17020:2012
Type of Inspection Body Type A
 
Scopes of Accreditation

Field of Inspection

Type and Range of Inspection

Standards / Regulations / Methods / Procedures

Number identification with year of publication

Title

IAF 17a
Basic metals

 

 

 

  • Ferrous Alloys, Steels, Structural Shapes - Plates, Coils, Bars, Rods, Sections, Wires

Stage wise/ In -process, and Final Inspection

IS 2002, 2009

Steel plate for pressure vessel for intermediate and high temperature service including boilers

 

 

IS 7452, 2013

Ho trolled steel sections for doors,windows and ventilators - specification

 

 

IS 1732, 1989

Steel bars, round and square for structural and general engineering purposes - dimensions

 

 

IS 7887, 1992

Mild steel wire rod for general engineering purposes - specification

 

 

IS 2062, 2011

Hot rolled medium and high tensile structural steel - specification

 

 

ASME SEC II Part A  2013

Ferrous Material Specifications

 

 

EN 10028, 2009

Flat products made of steels for pressure purposes. General requirements

 

 

 

Customer Requirements in the form of QAP. However the applicable National & International Codes and Standards shall be among those which are either referred in the scope statement or shall be  equivalent to the standards described above for the relevant scope category

  • Pipe Fittings

Stage wise/ In-process, and Final Inspection

IS 1239, 2011

Steel tubes, tubulars and other wrought steel fittings — specification

 

 

ASTM A 234, 2015

Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service

 

 

 

ASTM A 182, 2015

Specification for Forged or Rolled Alloy-Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service

 

 

EN 877, 1999

Specification for Cast Iron Pipes  and fittings

 

 

ASTM A 420, 2015

Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service

 

 

ASTM A 403, 2015

Specification for Wrought Austenitic Stainless Steel Piping Fittings

 

 

ASTM A 758, 2015

Specification for Wrought-Carbon Steel Butt-Welding Piping Fittings with Improved Notch Toughness

 

 

ASTM A 774, 2015

Specification for As - Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures

 

 

 

Customer Requirements in the form of QAP. However the applicable National & International Codes and Standards shall be among those which are either referred in the scope statement or shall be  equivalent to the standards described above for the relevant scope category

  • Tubes

Stage wise/ In - process, and Final Inspection

IS 1161, 2014

Steel Tubes for Structural Purposes - Specification

 

 

IS 3601, 2006

Steel Tubes for Mechanical and Genewl ENG~EEWG Purposes - Specification

 

 

ASTM A 178, 2015

Specification for Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler and Super heater Tubes

 

 

ASTM A 179, 2015

Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes

 

 

ASTM A 192, 2015

Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service

 

 

ASTM A 209, 2015

Specification for Seamless Carbon-Molybdenum Alloy-Steel Boiler and Super heater Tubes

 

 

ASTM A 213, 2015

Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Super heater, and Heat-Exchanger Tubes

 

 

ASTM A 214, 2015

Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes

 

 

ASTM A 249, 2015

Specification for Welded Austenitic Steel Boiler, Super heater, Heat-Exchanger, and Condenser Tubes

 

 

API 5CT, 2011

Specification for Casing and Tubing

 

 

EN 10255, 2004

Non-alloy steel tubes suitable for welding and threading. Technical delivery conditions

 

 

 

Customer Requirements in the form of QAP. However the applicable National & International Codes and Standards shall be among those which are either referred in the scope statement or shall be  equivalent to the standards described above for the relevant scope category

  • Castings

Stage wise/ In-process, and Final Inspection

IS 1030, 1998

Carbon steel castings for general engineering purposes - specification

 

 

IS 2644, 1994

High strength steel castings for general engineering and structural purposes-specification

 

 

IS 1865, 1991

Iron Castings with Spheroidal or Nodular Graphite - Specification

 

 

ASTM A 915, 2015

Steel Castings, Carbon and Alloy, Chemical Requirements Similar to Standard Wrought Grades

 

 

ASTM A 958, 2015

Steel Castings, Carbon and Alloy, with Tensile Requirements, Chemical Requirements Similar to Standard Wrought Grades

 

 

ASTM A 781, 2015

Standard Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use

 

 

 

Customer Requirements in the form of QAP. However the applicable National & International Codes and Standards shall be among those which are either referred in the scope statement or shall be  equivalent to the standards described above for the relevant scope category

  • Forgings

Stage wise/ In-process, and Final Inspection

IS 2004, 1991

Carbon steel forgings for general engineering purposes-specification

 

 

ASTM A 788, 2015

Standard Specification for Steel Forgings, General Requirement

 

 

ASTM A 336, 2015

Alloy Steel Forgings for Pressure and High-Temperature Parts

 

 

ASTM A 372, 2015

Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels

 

 

ASTM A 473, 2015

Standard Specification for Stainless Steel Forgings

 

 

ASTM A 1049, 2015

Standard Specification for Stainless Steel Forgings, Ferritic/Austenitic (Duplex), for Pressure Vessels and Related Components

 

 

 

Customer Requirements in the form of QAP. However the applicable National & International Codes and Standards shall be among those which are either referred in the scope statement or shall be  equivalent to the standards described above for the relevant scope category

IAF 17b
Fabricated metal products

 

 

 

  • Pressurized and unpressurised Vessels

Stage wise/ In-process, and Final Inspection

ASME Sec VIII, 2015

Rules for construction of pressure vessels

 

 

IS 2825, 1969

Code for Unfired pressure vessels

 

 

EN 13445, 2014

Unfired Pressure Vessels

 

 

 

Customer Requirements in the form of QAP. However the applicable National & International Codes and Standards shall be among those which are either referred in the scope statement or shall be  equivalent to the standards described above for the relevant scope category

  • Boilers

Stage wise/ In-process, and Final Inspection

IBR-1950

Indian Boiler Regulations

 

 

ASME Sec I, 2015

Power Boilers

 

 

EN 12952 & 12953, 2012

Water Tube Boiler standards & Shell Boiler standards

 

 

 

Customer Requirements in the form of QAP. However the applicable National & International Codes and Standards shall be among those which are either referred in the scope statement or shall be  equivalent to the standards described above for the relevant scope category

  • Tanks

Stage wise/ In-process, and Final Inspection

IS 803, 1976

Code of practice for design, fabrication and erection of vertical mild steel cylindrical welded oil storage tanks

 

 

IS 10987, 1992

Code of fabrication, Practice for design, testing and installation, of under-ground/above-ground horizontal cylindrical steel storage tanks for petroleum products

 

 

API 620, 2013

Design and Construction of Large, Welded, Low-Pressure Storage Tanks

 

 

API 650, 2013

Welded tanks for oil storage

 

 

ASME Sec VIII 2015

Rules for construction of pressure vessels

 

 

 

Customer Requirements in the form of QAP. However the applicable National & International Codes and Standards shall be among those which are either referred in the scope statement or shall be  equivalent to the standards described above for the relevant scope category

  • Gas Cylinders

Stage wise/ In-process, and Final Inspection

IS 8196, 2004

Steel cylinders for compressed gases (atmospheric gases, hydrogen, high pressure liquefiable gases and dissolved acetylene gases) — code of practice

 

 

IS 15490, 2004

Cylinders for on-board storage of compressed natural gas as a fuel for automotive vehicles — specification

 

 

ISO 11119-3, 2013

Gas cylinders -- Refillable composite gas cylinders and tubes -- Design, construction and testing -- Part 3: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450L with non-load-sharing metallic or non-metallic liners

 

 

 

Customer Requirements in the form of QAP. However the applicable National & International Codes and Standards shall be among those which are either referred in the scope statement or shall be  equivalent to the standards described above for the relevant scope category

  • SAW pipes

Stage wise/ In-process, and Final Inspection

API 5L, 45TH Edition 2012

Specification for line pipe

 

 

IS 3589, 2001

Steel pipes for water and sewage

 

 

 

Customer Requirements in the form of QAP. However the applicable National & International Codes and Standards shall be among those which are either referred in the scope statement or shall be  equivalent to the standards described above for the relevant scope category

  • ERW Pipe

Stage wise/ In-process, and Final Inspection

IS 3589, 2001

Steel pipes for water and sewage

 

 

ASTM A 53, 2015

Seamless and Welded Standard Steel Pipe

 

 

 

Customer Requirements in the form of QAP. However the applicable National & International Codes and Standards shall be among those which are either referred in the scope statement or shall be  equivalent to the standards described above for the relevant scope category

  • Ductile Iron Pipes

Stage wise/ In-process, and Final Inspection

IS 8329, 2000

Centrifugally cast (spun) ductile iron pressure pipes for water, gas and sewage - specification

 

 

ISO 2531, 2009

Ductile iron pipes, fittings, accessories and their joints for water applications

 

 

ASTM A 746, 2015

Standard Specification for Ductile Iron Gravity Sewer Pipe

 

 

ASTM A 716, 2015

Standard Specification for Ductile Iron Culvert Pipe

 

 

ASTM A 74, 2015

Standard Specification for Cast Iron Soil Pipe and Fittings

 

 

 

Customer Requirements in the form of QAP. However the applicable National & International Codes and Standards shall be among those which are either referred in the scope statement or shall be  equivalent to the standards described above for the relevant scope category

  • Distillation Columns

Stage wise/ In-process, and Final Inspection

IS 11556, 2005

Purchasers data sheets for distillation column

 

 

ASME SEC VIII 2015

Rules for construction of pressure vessels

 

 

 

Customer Requirements in the form of QAP. However the applicable National & International Codes and Standards shall be among those which are either referred in the scope statement or shall be  equivalent to the standards described above for the relevant scope category

IAF 18
Machinery and equipment

 

 

 

  • Pumps 

Stage wise/and Final Inspection

IS 6595, 2002

Horizontal centrifugal pumps for clear, cold water— specification

 

 

IS 11745, 1986

Technical supply conditions for positive displacement pumps-reciprocating

 

 

API 610, 2010

Centrifugal pumps for petroleum, heavy duty chemical, and gas industry service

 

 

API 674, 1995

Positive displacement pumps - Reciprocating

 

 

API 675, 2014

Positive displacement pumps – Controlled volume

 

 

IS 5120, 1977

Technical requirements for roto dynamic special purpose pumps

 

 

 

Customer Requirements in the form of QAP. However the applicable National & International Codes and Standards shall be among those which are either referred in the scope statement or shall be  equivalent to the standards described above for the relevant scope category

  • Compressors

Stage wise/and Final Inspection

IS 15661, 2006

Petroleum, chemical and Gas service industries — centrifugal compressors

 

 

IS 13124, 1993

Reciprocating gas compressors- Technical supply conditions

 

 

API 618, 1995

Reciprocating Compressors for Petroleum, Chemical, and Gas Industry Services,

 

 

 

Customer Requirements in the form of QAP, applicable National & International Codes and Standards

  • Axial Fans, Blowers, Dryers

Stage wise/and Final Inspection

IS 4894, 1987

Specification for - centrifugal fans

 

 

IS 1710, 1989

Specification for pumps - vertical turbine mixed and axial flow, for clear cold water

 

 

2012

AMCA Standard for fan testing

 

 

 

Customer Requirements in the form of QAP, applicable National & International Codes and Standards

  • HVAC systems

Stage wise/and Final Inspection

IS 659, 2004

Safety Code for Air Conditioning

 

 

IEC 60335 series

Safety of Electrical Household appliances

 

 

 

Customer Requirements in the form of QAP. However the applicable National & International Codes and Standards shall be among those which are either referred in the scope statement or shall be  equivalent to the standards described above for the relevant scope category

  • Valves

Stage wise/ In-process, and Final Inspection

IS 9890, 1981

Specification for general purpose ball valves

 

 

API 598, 2009

Valve inspection and testing

 

 

API 600, 2015

Bolted bonnet steel gate valves for petroleum and natural gas industries

 

 

API 602, 2015

Compact Steel Gate Valves— Flanged, Threaded, Welding, and Extended-Body Ends

 

 

ASME B16.34, 2013

Valves—Flanged, Threaded, and Welding End

 

 

EN 12516, 2014

Industrial valves. Shell design strength. Calculation method for steel valve shells

 

 

 

Customer Requirements in the form of QAP. However the applicable National & International Codes and Standards shall be among those which are either referred in the scope statement or shall be  equivalent to the standards described above for the relevant scope category

  • Heat Exchangers

Stage wise/and Final Inspection

IS 4503, 1967

Specification for shell and tube type heat exchangers

 

 

TEMA, 2007

The Tubular Exchanger Manufacturers Association

 

 

ASME Sec VIII, 2015

Rules for construction of pressure vessels

 

 

 

Customer Requirements in the form of QAP. However the applicable National & International Codes and Standards shall be among those which are either referred in the scope statement or shall be  equivalent to the standards described above for the relevant scope category

  • Turbines

Stage wise/and Final Inspection

IS 1710, 1989

Specification for pumps — vertical turbine mixed and axial flow , for clear cold water

 

 

IS 15663, 2006

Design and installation of natural gas pipelines — code of practice

 

 

IS 15665, 2003

Gas turbines - Vocabulary

 

 

API 612, 2014

Petroleum, Petrochemical and Natural Gas Industries-Steam Turbines-Special-purpose Applications

 

 

 

Customer Requirements in the form of QAP. However the applicable National & International Codes and Standards shall be among those which are either referred in the scope statement or shall be  equivalent to the standards described above for the relevant scope category

  • Agriculture Tractors / Components relating to tractors

Stage wise/and Final Inspection

IS 11825:1986

Method of weighment of automotive vehicles

 

 

AIS 037:2004

Procedure for Type approval and Establishing Conformity of Production for Safety Critical Components

 

 

 

Customer Requirements in the form of QAP. However the applicable National & International Codes and Standards shall be among those which are either referred in the scope statement or shall be  equivalent to the standards described above for the relevant scope category

  • Gear Boxes

Stage wise/and Final Inspection

IS 7403, 1974

Code of practice for selection of standard worm and helical gear boxes

 

 

API 613, 2003

Special purpose gear units for petroleum, chemical, and gas industry services

 

 

 

Customer Requirements in the form of QAP. However the applicable National & International Codes and Standards shall be among those which are either referred in the scope statement or shall be  equivalent to the standards described above for the relevant scope category

  • Bearings

Stage wise/and Final Inspection

IS 13962, 1994

Rolling bearings - metric tapered roller bearings - designation system

 

 

API 670, 2014

Machinery Protection Systems

 

 

 

Customer Requirements in the form of QAP. However the applicable National & International Codes and Standards shall be among those which are either referred in the scope statement or shall be  equivalent to the standards described above for the relevant scope category

  • Centrifuges

Stage wise/and Final Inspection

IS 4092-1, 1996

Centrifuges of the basket and bowl and vibrating type for use in industrial and commercial application

 

 

ASME Sec VIII, 2015

Rules for construction of pressure vessels

 

 

 

Customer Requirements in the form of QAP, applicable National & International Codes and Standards

  • Gaskets

Stage wise/and Final Inspection

IS 11149, 1984

Rubber gaskets

 

 

IS 2712, 1998

Gaskets and packings - compressed asbestos fiber jointing

 

 

ASTM F 104-11, 2015

Standard Classification System for Nonmetallic Gasket Materials

 

 

ASTM C-564-14, 2015

Standard Specification for Rubber Gaskets for Cast Iron Soil Pipe and Fittings

 

 

ASTM D5926 – 15, 2015

Standard Specification for Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing System

 

 

 

Customer Requirements in the form of QAP. However the applicable National & International Codes and Standards shall be among those which are either referred in the scope statement or shall be  equivalent to the standards described above for the relevant scope category

  • Cranes

Stage wise/and Final Inspection

IS 3177, 1999

Code of practice for electric overhead travelling cranes and gantry cranes other than steel work cranes

 

 

IS 807, 2006

Design, erection and testing (structural portion) of cranes and hoists — code of practice

 

 

IS 14470, 1997

Cranes -test code and procedures

 

 

ASME B 30.2, 2011

Overhead and Gantry Cranes (Top Running Bridge, Single or Multiple Girder, Top Running Trolley Hoist)

 

 

 

Customer Requirements in the form of QAP. However the applicable National & International Codes and Standards shall be among those which are either referred in the scope statement or shall be  equivalent to the standards described above for the relevant scope category

  • Skid mounted system

Stage wise/and Final Inspection

IS 11461, 1985

Code of practice for compressor safety

 

 

ASTM A 53, 2015

Seamless and Welded Standard Steel Pipe

 

 

 

Customer Requirements in the form of QAP. However the applicable National & International Codes and Standards shall be among those which are either referred in the scope statement or shall be  equivalent to the standards described above for the relevant scope category

IAF Scope 19
Electrical and Optical Equipment

 

 

 

  • Transformers

Final Inspection

IS 2026 Part 1 to 4, 2011

Power transformers

 

 

IS 2705 Part 1 to 4, 1992

Current transformers

 

 

IS 3156 Part 1 to 4, 1992

Voltage transformers

 

 

IEC 60076, 2011

Power transformers

 

 

 

Customer Requirements in the form of QAP. However the applicable National & International Codes and Standards shall be among those which are either referred in the scope statement or shall be  equivalent to the standards described above for the relevant scope category

  • Electric Motors

Final Inspection

IS 325, 1996

Three-phase induction motors

 

 

IS 4029, 2010

Guide for Testing Three Phase Induction Motors

 

 

IS 60034, 2010

Rotating electrical machines

 

 

 

Customer Requirements in the form of QAP. However the applicable National & International Codes and Standards shall be among those which are either referred in the scope statement or shall be  equivalent to the standards described above for the relevant scope category

  • MCC

Final Inspection

IS 13947, 2004

Low voltage switch gear and control gear

 

 

IS 8623-1, 1993

Low - Voltage Switchgear and Control Gear Assemblies, Part 1: Requirements for Type-Tested and Partially Type-Tested Assemblies

 

 

IS 12729, 2004

Common High - Voltage Switchgear and Control gear Standards

 

 

IEC 61439, 2011

Low - voltage switchgear and control gear assemblies

 

 

 

Customer Requirements in the form of QAP. However the applicable National & International Codes and Standards shall be among those which are either referred in the scope statement or shall be  equivalent to the standards described above for the relevant scope category

  • Control Panels

Final Inspection

IS 732, 1989

Code of Practice for Electrical Wiring Installations

 

 

IS 3072, 1975

Code of practice for installation and maintenance of switchgear

 

 

IEC 61439, 2011

Low-voltage switchgear and control gear assemblies - Part 1: General rules

 

 

 

Customer Requirements in the form of QAP. However the applicable National & International Codes and Standards shall be among those which are either referred in the scope statement or shall be  equivalent to the standards described above for the relevant scope category

  • Junction Boxes

Final Inspection

IS 732, 1989

Code of Practice for Electrical Wiring Installations

 

 

IEC 62790, 2014

Junction boxes for photovoltaic modules - Safety requirements and tests

 

 

 

Customer Requirements in the form of QAP. However the applicable National & International Codes and Standards shall be among those which are either referred in the scope statement or shall be  equivalent to the standards described above for the relevant scope category

  • Switch Gears

Final Inspection

IS 13947-5, 2004

Low-Voltage Switchgear and Control gear, Part 5: Control Circuit Devices and Switching Elements, Section 2: Proximity Switches [ETD 7: Low Voltage Switchgear and Control gear]

 

 

IS 732, 1989

Code of Practice for Electrical Wiring Installations

 

 

IS 9921, 1985

Alternating Current Disconnectors (isolators) and Earthing Switches for Voltages

 

 

IEC 62271, 2011

High-voltage switchgear and control gear

 

 

 

Customer Requirements in the form of QAP. However the applicable National & International Codes and Standards shall be among those which are either referred in the scope statement or shall be  equivalent to the standards described above for the relevant scope category

  • Insulated Cables & Wires, 

Final Inspection

IS 7098, 2011

Crosslinked polyethylene insulated PVC sheathed cables

 

 

IS 1554, 1988

PVC insulated (heavy duty) electric cables

 

 

IS 9968, 1988

Elastomer-insulated Cables

 

 

IS 694, 2010

Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 450/750 v

 

 

IS 14255, 1995

Specification for AERIAL Bunched Cables for working Voltage. Up to & including 1100 Volts

 

 

IEC 60502, 2014

Power cables with extruded insulation and their accessories for rated voltages from 1 kV up to 30 kV

 

 

IEC 60840, 2011

Power cables with extruded insulation and their accessories for rated voltages above 30 kV (Um = 36 kV) up to 150 kV (Um= 170 kV) - Test methods and requirements

 

 

 

Customer Requirements in the form of QAP. However the applicable National & International Codes and Standards shall be among those which are either referred in the scope statement or shall be  equivalent to the standards described above for the relevant scope category

  • Batteries

Final Inspection

IS 15549, 2005

Stationary Regulated Lead Acid Batteries [ETD 11: Secondary Cells and Batteries]

 

 

IEC 61427, 2015

Secondary cells and batteries for photovoltaic energy systems (PVES) – General requirements and methods of test

 

 

 

Customer Requirements in the form of QAP. However the applicable National & International Codes and Standards shall be among those which are either referred in the scope statement or shall be  equivalent to the standards described above for the relevant scope category

  • Generators

Final Inspection

IS 13364, 1992

AC generators driven by reciprocating internal combustion engine

 

 

IS 8753, 1977

Code for acceptance tests on stationary steam generators of the power station type

 

 

IS 60034, 2010

Rotating Electrical Machines

 

 

 

Customer Requirements in the form of QAP. However the applicable National & International Codes and Standards shall be among those which are either referred in the scope statement or shall be  equivalent to the standards described above for the relevant scope category

IAF Scope 22 Manufacture of Transport Equipment

 

 

 

  • Car, Bus, Truck, trailers, cowls

Prototype Product Inspection, In-process Inspection and Final Inspection

1989

CMVR Rule 1989,

 

 

IS: 11852, 2001

Automotive Vehicles - brakes and braking systems, Part 1: Terminology [TED 4: Automotive Braking Systems]

 

 

AIS 37, 2006

Automotive Industry Standards - Procedure for Type Approval and Establishing Conformity of Production for Safety Critical Components

 

 

AIS: 042 2006

Automotive Industry Standards - Agricultural Tractors – Steering Efforts Requirements.

 

 

 

Customer Requirements in the form of QAP. However the applicable National & International Codes and Standards shall be among those which are either referred in the scope statement or shall be  equivalent to the standards described above for the relevant scope category

  • Engines and its components

Prototype Product Inspection, In-process Inspection and Final Inspection

  TAP 115/116, (CMVR Rule) 2007

Standards for Petrol / Diesel Engined Vehicles

 

 

 

Customer Requirements in the form of QAP. However the applicable National & International Codes and Standards shall be among those which are either referred in the scope statement or shall be  equivalent to the standards described above for the relevant scope category

  • Automotive components, sub-assemblies & assemblies Railway wagon locomotive and rolling stock

Prototype Product Inspection, In-Process Inspection and Final Inspection

AIS 37, 2006

Automotive Industry Standards - Procedure for Type Approval and Establishing Conformity of Production for Safety Critical Components

 

 

AIS: 042 2006

Automotive Industry Standards - Agricultural Tractors – Steering Efforts Requirements.

 

 

ASME Sec VIII 2015

Rules for construction of pressure vessels

 

 

ASTM A 781, 2015

Standard Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use

 

 

2015

RDSO Specifications

 

 

 

Customer Requirements in the form of QAP. However the applicable National & International Codes and Standards shall be among those which are either referred in the scope statement or shall be  equivalent to the standards described above for the relevant scope category

IAF Scope 26
Gas Supply

 

 

 

  • General Construction of long distance pipelines for Oil and Gas

Stage wise / Final Inspection up to commissioning

IS 15663, 2006

Design and installation of natural gas pipelines - Code of Practice

 

 

IS 5822, 1994

Code of Practice for Laying of Electrically Welded Steel Pipes for Water Supply

 

 

AWS D 1.1, 2015

Structural Welding Code - Steel

 

 

2015

ASTM Standards

 

 

API 1104, 2013

Welding of Pipelines and related Facilities

 

 

 

Customer Requirements in the form of QAP, applicable National & International Codes and Standards

  • Distribution services of gaseous fuels through mains

Stage wise / Final Inspection up to commissioning

IS 15663, 2006

Design and installation of natural gas pipelines - Code of Practice

 

 

IS 5822, 1994

Code of Practice for Laying of Electrically Welded Steel Pipes for Water Supply

 

 

AWS D 1.1, 2015

Structural Welding Code - Steel

 

 

2015

ASTM Standards

 

 

API 1104, 2013

Welding of Pipelines and related Facilities

 

 

 

Customer Requirements in the form of QAP, applicable National & International Codes and Standards

  • T4S audit for local city gas distribution network.

Stage wise / Final Inspection up to commissioning

PNGRB T4S Amendment Regulations,2016

PNGRB T4S Regulations for City Gas Distribution

  • T4S audit for natural gas pipelines.

Stage wise / Final Inspection up to commissioning

PNGRB T4S Amendment Regulations,2016

PNGRB T4S Regulations for Natural Gas Pipelines

 
The following offices of   Vincotte International India Assessment Services Pvt. Ltd. (Industrial Services Division) are included under accreditation

S.No

Location

Address

Key activities performed


01


Main office


207, 2nd Floor, AVIOR of Nirmal Galaxy, LBS Marg, Opp Johnson & Johnson, Mulund (West), Mumbai - 400 080


Top management functions, quality management system functions, administration & accounts, other key activities as applicable to main office.

Inspection contract review, Inspection planning & execution, Inspection personnel authorization & assignment, Issue of inspection reports / certificates.

 Print 
 Close 
Close Search Window