Inspection of Coal

Methods for sampling of Coal and Coke, Part 1 : Sampling of coal, Section 1 : Manual sampling & Customer's Procedures/QAPs

Inspection of a lot, Inspection of processes.

FSSAI Schedule IV Part 2- General Requirements on Hygienic and Sanitary Practices for Food Business Operators

In-process and Final Inspection

BIS Scheme requirements for Factory Inspection

Methods of analysis for food grains: Part 1 refractions

Method of Analysis for Food grains Part 2 Determination of Moisture Content

In-process and Final Inspection

BIS Scheme requirements for Factory Inspection

Packaged Drinking Water (Other Than Packaged Natural Mineral Water) - Specification

Finished product inspection involving visual and dimensional checks

Tolerances for fabrication of steel structure

Code of practice for design, fabrication, testing and installation of underground/above ground horizontal cylindrical steel storage tanks for petroleum products

Metallic materials- tensile testing at ambient temperature

Quality, Quantity, witness of testing, painting and packaging inspection

High strength deformed steel bars and wires for concrete reinforcements

Cod of practice for welding of mild steel plain and deformed bars for reinforced concrete construction

Standard Specification for Deformed and Plain Carbon- Steel Bars for Concrete

Specification for rolled zinc plate, sheet and strip

Standard Specification for Forgings, Carbon Steel for Piping Components

Standard Specification for Steel Castings, High Strength, for Structural Purposes

Steel for general structural purposes

Standard Specification for Structural Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-

Strength Low-Alloy with Improved Formability, and Ultra-High Strength

Standard Specification for carbon steel bolts and studs ranging from 1/4" through 4" diameter

Tolerances for fabrication of steel structure

Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners

Technical supply conditions for threaded steel fastners

Hexagon head bolts, screws and nuts of product grade 'C'

Specification for Hexagon bolts for steel structure

Fastners-threaded steel fastners-hexagon head transmission tower bolts- specifications

Pipe flanges and flanged fittings

Steel tubes for structural purposes

Steel tubes, tubular and other wrought steel fittings

Line pipes

Steel pipes for water and sewage (168.3 to 2540mm outside 84 diameter)

Carbon, Alloy and stainless steel pipes

Standard Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe

Standard specification for roller, bearing, needle, ferrous, solid, spherical end

Standard specification for bearing, roller, needle

Rolling bearings - taper rolling bearings-tapered rollers - metric series - specifications

Plummer block housing

Plain bearings -Hardness testing of bearing metals

Tolerances for fabrication of steel structure

Code of practice for design, installation and maintenance of overhead power lines

Code of practice for use of structural steel in overhead transmission line: Fabrication, galvanizing, inspection and packing

Method for testing uniformity of coating on zinc coated articles

Stage and final inspection

Performance test code on compressors and exhausters

Gas turbines for the petroleum, chemical and gas industry Services

General purpose steam turbines for petroleum, chemical and gas industry services

Petroleum, Petrochemical, and Natural Gas Industries- Steam Turbines - Special -purpose Applications

Centrifugal Fans for Petroleum, Chemical, and Gas Industry Services

Axial and Centrifugal Compressors and Expander compressors

Code for selection and testing of rotary screw compressors (oil flodded)

Specifications for centrifugal fans

Specification for electric axial flow fans

Code of practice for Industrial ventilation

Specification for pipeline valves

Specification for flanged steel pressure relief valves

Valve inspection and testing

Steel Gate Valves-Flanged and Butt-welding Ends, Bolted Bonnets

Valves- Flanged, threaded and welding end

Finished Product/stage/ Installationp

Current Transformers Voltage transformers
Power Transformers
New Insulating oils
Dry type power transformers

Induction motors-Energy efficiency, three phase, squirrel cage

Three phase induction motors

High voltage motor-starter: Direct-on-line (full voltage) ac starters

PVC Insulated (Heavy Duty) electric cables for 364 working voltages upto and including 1100v

Code and practice for installation and maintenance of power cables upto and including 33kv rating

Aluminium conductors for overhead transmission purpose

Conductors for insulated electric cables and flexible cords

Methods of test for determination of insulation resistance of solid insulating material

Preconditioning, conditioning and testing of solid electrical insulating material

Specifications for alternating current disconnectors (isolators) and earthing switches for voltages above 1000v

Low voltage fuses for voltages not exceeding 1000v AC or 1500 v DC

Connectors for optical fibres

Connectors for frequencies below 3 MHz for use with printed boards

AC motor capacitors

Shunt capacitors for AC power system having a rated voltage above 1000v

Testing, evaluation, installation and maintenance of AC electricity meters - code of practice

AC static watthour meters class 1 & 2

Interconnecting bus bars for AC voltage above1 kvupto and including 36 kv

Guide for Metal-Enclosed Bus and Calculating Losses in Isolated-Phase Bus

Code of practice for electric wire installation

Low-Voltage switchgear and control gear assemblies

Standard Specification for Indicators, Sight, Liquid Level, Direct and Indirect Reading, Tubular Glass/Plastic

Specification for smoke detectors for use in automatic electrical fire alarm system

Specification for heat sensitive fire detectors for use in automatic fire alarm system

Standard specifications for transducers, pressure and differential pressure, electrical and optical fibre

Cable management - Cable tray systems and cable ladder systems

Conduits for electrical installations

AC metal switchgear and control gear for rated voltages above 1kv and upto and including 52kv

Specification for high voltage alternating current circuit breakers

Specifications for low voltage switchgears and control gears assemblies

Low voltage switchgear and control gear

Direct acting indicating analogue electrical measuring instruments and their accessories

AC generators driven by reciprocating internal combustion engines -specifications

Functional safety of electrical/electronic/programmable electronic safety-related systems

In-Service

PNGRB's "Technical Standards and Specifications including Safety Standards for City or Local Natural Gas Distribution Network" Regulations, 2008

In-Service

PNGRB's "Integrity Management System for Natural Gas pipelines" Regulations 2012

In-Service

PNGRB's "Integrity Management System for City or Local Natural Gas Distribution Network" Regulations, 2013

Stage-wise/FinalInspection

CPHEEO Manual on Water Supply & Treatment, Third edition

In service

PNGRB's Technical Standards and Specifications including Safety Standards for Petroleum and Petroleum Products Pipelines Regulations, 2016

Stage wise Inspection

Code of safety for excavation work

Visual appearance, dimensional and quantity verification.

Design and construction of foundation in soils

Anti termite measures in buildings

Method of making, Curing and determining compressive
strength of accelerated-cured concrete test specimens

Code of practice for plain and reinforced concrete

Methods of sampling and analysis of concrete.

Compressive strength test for cement mortar cubes

Code of practice for use of steel tubes in general building construction

Ministry of Road Transport & Highways Specifications

Rural Roads(PMGSY) Quality Assurance Handbook for Rural Roads

Indian Road Congress Public Safety Standards

- SBM Urban Survey
- ODF Survey
- Rural Drinking Water &Sanitation Survey
- SwachhRailSurvey
- Swachh Airport Survey

Main office

Top management functions, quality management system functions, administration & accounts, other key activities as applicable to main office.

Inspection contract review, Inspection planning & execution, Inspection personnel authorization & assignment, Issue of inspection reports / certificates.