IAF Scope 17a
Basic metals

Ferrous & Non-Ferrous Forgings

ASME SA 105:2021 ASTM A 105 / A 105M-2014

Specification for carbon steel Forgings for piping application

ASME SA 350:2021 ASTM A 350 / A 350M-2018

Specification for carbon and low Alloy steel forgings, requiring notch toughness testing for piping components

ASME SA 182:2021 ASTM A 182 / A 182M-2022

Specification for forged or rolled Alloy and stainless steel pipe flanges, forged fittings, and valves and parts for high-temperature service

Castings

ASME SA 216:2021

Specification for Steel Castings, Carbon, suitable for fusion welding for high temperature service

ASME SA 217:2021

Specification for steel castings,

ASTM A 217 / A 217M-2022

martensitic stainless and alloy, for pressure-containing parts, suitable for high-temperature service

ASME SA 352:2021 ASTM A 352 / A 352M-2021

Specification for steel castings, ferritic and martensitic, for pressure containing parts, suitable for low temperature service

EN 10293-15th Ed. 2021

Steel castings for general engineering uses

Tubings (Ferrous)

ASME SA 106:2021

Specification for seamless

ASTM A 106 / A 106M-2019A

carbon steel pipe for high temperature service

ASME SA 179:2021 ASTM A 179 / A 179M-2019

Specification for seamless cold drawn low carbon steel heat exchanger and condenser tubes

ASME SA 213:2021 ASTM A 213 / A 213M-2022

Specification for seamless ferritic and austenitic alloy steel boiler, super heater, and heat exchanger tubes

IS 1239(Pt 1):2004 IS 1239(Pt 2):2011

Steel Tubes, Pipes and Fittings

Tubings (Non-Ferrous)

SB-111:2021

Specification for Copper and Copper alloy seamless condenser tubes and ferrule stock

Plates

BS EN 10051-10th Ed. 2020

Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels. Tolerances on dimensions and shape

ASME SA 516:2021 ASTM A 516 / A 516M-2017

Specification for pressure vessel plates, carbon steel, for moderate and lower temperature service

ASTM SA 515:2021 ASTM A 515 / A 515M-2017

Specification for pressure vessel plates,carbon steel, for intermediate and higher temperature service

ASME SA 285:2021 ASTM A 285 / A 285M-2017

Specification for pressure vessel plates, carbon steel, low alloy and intermediate tensile strength

ASME SA 387:2021 ASTM A 387 / A 387M-2017A

Specification for pressure vessel plates, alloy steel, chromium molybdenum

IS 2041:2009 (R 2013) IS 2062:2011 (R 2016)

Steel Plate for Pressure Vessel used at moderate and low temperature

ASME SA 240:2021 ASTM A 240 / A 240M-2022

Hot Rolled Medium and High Tensile. Structural Steel

ASME SA 480:2021 ASTM A 480 / A 480M-2022

Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip

Fasteners (Carbon Steel/ Alloy Steel)

ASME SA 193:2021 ASTM A 193 / A 193M-2022

Specification for alloy steel and stainless steel bolting materials for high temperature or high-pressure service and other special purpose applications

ASME SA 194:2021 ASTM A 194 / A 194M-2022

Specification for carbon and alloy steel nuts for bolts for high pressure or high-temperature service or both

ASME SA 320:2021 ASTM A 320 / A 320M-2022

Specification for alloy steel and stainless steel bolting for low-temperature service

EN 10028:2009 (Part 1 to 7)

Flat products made of steels for pressure purposes. General requirements

Fittings (Seamless)

ASME SA 234:2021 Various Grades ASTM A 234 / A 234M-2019

Spec for pipe fittings of wrought carbon steel and alloy steel for moderate and high-temperature service

ASME SA 403:2021 Various Grades ASTM A 403 / A 403M-2022A Various Grades

Specification for pipe fittings of High alloy steel for moderate and high-temperature service

OR Client Requirements in the form of QAP mentioning required specification and scope mentioned in this scope. However, the applicable National & International Codes and Standards shall be among those which are either referred in the scope statement or shall be equivalent to the standards described above for the relevant scope category

IAF Scope 17b

Fabricated Metal Products

Pressure Vessels

ASME Code Sec VIII Div-1, Div-2: 2021 Edition

IS 2825:2022 BS PD 5500:2021

EN 13345:2021

ASME Boiler and Pressure Vessel Code (Rules for construction of pressure vessel)

Code for Unfired Pressure Vessel Specification for unfired fusion welded pressure vessel

Code for Unfired Pressure Vessel

Heat Exchangers

TEMA, 10th ED.2019 API 660-9th Ed. 2015

Specification for Heat exchanger Shell and Tube heat Exchanger

Boilers

ANSI B31.1:2022 ANSI B31.3:2020

ASME Code for Pressure Piping ASME Code for Process Piping

Tanks

API 650-13th Ed. 2020 API 620-12th Ed. 2013

Welded tanks for oil storage Design and construction of large, welded, low-pressure storage tanks

Formed Components (Dish ends fabricated nozzles)

ASME Code Sec VIII Div 1 and Div 2:2021

ASME Boiler and Pressure Vessel Code (Rules for construction of pressure vessel)

Fittings (Seamless and Welded)

ASME SA 234:2021 ASTM A 234 / A 234 M-2019

Spec for pipe fittings of wrought carbon steel and alloy steel for moderate and high temperature service

Structural Fabrications

AWS D1.1 Code: 2020 edition

Structural welding Code-steel.

Pipes

API 5L, 46th Ed. 2018

Specification Line Pipe.

Wire Ropes

API-Spec. 9A-27th Ed. 2020

Spec for wire ropes

IS 2266:2019

Steel wire ropes for general engineering purpose

OR Client Requirements in the form of QAP mentioning required specification and scope mentioned in this scope. However, the applicable National & International Codes and Standards shall be among those which are either referred in the scope statement or shall be equivalent to the standards described above for the relevant scope category

IAF Scope 18

Machinery & Equipment

Cranes

BS EN 13000-1, -2, -3:2010 Addendum 2014 IS 3177:2020

Cranes, Mobile cranes

Code for practice for electric overhead travelling cranes and gantry cranes other than steel work cranes

Pumps (Centrifugal Horizontal, Vertical) and other

IS 6595 (Part 2):2020 API 610-11th edition:2021

Centrifugal Pump for Petroleum Petrochemical and Natural Gas Industries

Gear Boxes

AGMA 6011-J14:2019

Specification for High Speed Helical Gear Units

Valves (Ferrous & Non Ferrous), Gates, Globes,
Sluices, Check Valves

BS EN 15761:2020

API 602, 11th Edition:2022

Specification for Steel gate, Globe and Check valves

Steel gate, globe and check valve, for petroleum and natural gas industries

API 603, 9th Edition:2018

Gate, globe, and check valves for sizes DN100 (NPS4) and smaller for the petroleum and natural gas industries

BS EN 10434:2020

Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries and Testing

API 600, 14th Edition:2021

Steel Gate Valves - Flanged and Butt-welding Ends, Bolted Bonnets

OR Client Requirements in the form of QAP mentioning required specification and scope mentioned in this scope. However, the applicable National & International Codes and Standards shall be among those which are either referred in the scope statement or shall be equivalent to the standards described above for the relevant scope category

IAF Scope 19a

Electrical

Electrical Safety Audit of Installations

OISD 225:2010

Storage, Handling, and Dispensing at Petroleum Retail Outlets

Electrical Safety Audit of Installations

OISD 137:2010

Inspection of Electrical Equipment

Electrical Motors & Generators

IS 12615:2018

Line Operated Three Phase A.C. Motors (IE CODE) "Efficiency Classes and Performance Specification”

BS EN IEC 60034-3:2020

Rotating Electrical Machines - Specific requirements for synchronous generators driven by steam turbines or combustion gas turbines and for synchronous compensators

IEC 60034-1:2022

Rotating Electrical Machines - Part 1: Rating and performance

BS 2613:1970

The Electrical Performance of Rotating Electrical Machinery

Switchgears

IEC 62271-1:2017 + AMD1:2021

High-voltage switchgear and controlgear - Part 1: Common specifications for alternating current switchgear and control gear

IEC 62271:2022

High-voltage switchgear and controlgear - ALL PARTS

IEC 60947-1:2020

Low-voltage switchgear and controlgear - Part 1: General rules

IEC 60947-2:2016 + AMD1:2019

Low-voltage switchgear and controlgear - Part 2: Circuit-breakers

IEC 60947-3:2020

Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units

IEC 60947-4-1:2018

Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters

IEC 60947-5-1:2016

Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices

Transformers

IS 2705 (Part 1) Amd 2:2002

Current Transformers - Part 1 General Requirements

IS 2705 (Part 2):1992 (R 2002)

Current Transformers – Part 2: Measuring Current Transformers

IS 2705 (Part 3):1992 (R 2002)

Current Transformers – Part 3 :Protective Current Transformers

IS 2705 (Part 4):1992 (R 2002)

Protective current transformers for special purpose applications

IS 2026 (Part 1):2011 (R 2021)

Power transformers - Part 1 : General

IEC 60076-1:2011
IS 2026 (Part 2):2010 (R 2020)

IEC 60076-2:2011
IS 2026 (Part 3):2018 IEC 60076-3:2013 + AMD1:2018

Power Transformers - Part 3 Insulation Levels, Dielectric Tests and External Clearances in Air (Fourth Revision)

IS 2026 (Part 4):1977 (R 2021)
IEC 60076-4:2002

Power transformers - Part 4: Terminal marking, tappings and connections

IS 2026 (Part 5):2011 (R 2016)
IEC 60076-5:2006

Power Transformers - Part 5 Ability to Withstand Short Circuit

Wires and Cables (LT & HT)

IS 13730 (Part 0)-Sec 3:2012 (R 2017)

Specifications for Particular Types of Winding Wires Part 0 General Requirements Section 3 Enamelled Round Aluminium Wire

IS 9968 (Part 1):1988 (R 2020)

Elastomer insulated cables - Part 1 : For working voltages upto and including 1100V

IS 9968 (Part 2):2002 (R 2017)

Elastomer insulated cables - Part 2: For Working Voltages from 3.3 kV up to and Including 33kV

IS 694:2010 (R 2020)

Polyvinyl Chloride Insulated Unsheathed And Sheathed Cables/cords With Rigid And Flexible Conductor For Rated Voltages Up To And Including 1100 V

IS 7098 (Part 1):1988 (R 2020)

Crosslinked polyethylene insulated PVC sheathed cables - Part 1 : For working voltage upto and including 1100 V

IS 7098 (Part 2):2011 (R 2021)

Crosslinked Polyethylene Insulated Thermoplastics Sheathed Cables - Part 2 For Working Voltages from 3.3 kV up to and Including 33 kV

IS 7098 (Part 3):1993 (R 2019)

Cross-linked polyethylene insulated thermoplastic sheathed cables - Part 3 For working voltages from 66 kV upto and including 220 kV

IS 1554 (Part 1):1988 (R 2020)

PVC insulated (heavy duty) electric cables - Part 1 : For working voltages upto and including 1100 V

IS 1554 (Part 2):1988 (R 2020)

PVC Insulated (Heavy Duty) Electric Cables - Part 2 For Working Voltages from 3"3 kV up to and Including 11 kV

IEC 60502:2022

Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) - ALL PARTS

IEC 60502-1:2021

Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) - Part 1: Cables for rated voltages of 1 kV (Um = 1,2 kV) and 3 kV (Um = 3,6 kV)

IEC 60502-2:2014

Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) – Part 2: Cables for rated voltages from 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV)

IEC 60840:2020

Power cables with extruded insulation and their accessories for rated voltages above 30 kV (Um= 36 kV) up to 150 kV (Um = 170 kV) - Test methods and requirements

Aluminium Conductor for Overhead Transmission Purpose

IS 398 (Part 1):1996 (R 2018)

Aluminium conductors for overhead transmission purposes - Part 1 Aluminium stranded conductors

IS 398 (Part 2):1996 (R 2018

Aluminium conductors for overhead transmission purposes - Part 2 Aluminium conductors, galvanized steel reinforced

IS 398 (Part 3):1976 (R 2019)

Aluminium conductors for overhead transmission purposes - Part 3 Aluminium conductors, aluminized steel reinforced

IS 398 (Part 4):1994 (R 2021)

Aluminium conductors for overhead transmission purposes - Part 4 Aluminium alloy stranded conductors (aluminium magnesium silicon type)

IS 398 (Part 5):1992 (R 2018)

Aluminium conductors for overhead transmission purposes - Part 5 Aluminium conductors - galvanized steel reinforced for extra high voltage (400 kV and above)

IS 398 (Part 6):2021

Aluminium Conductors For Overhead Transmission Purposes - Part 6 High conductivity aluminium alloy stranded conductors

OR Client Requirements in the form of QAP mentioning required specification and scope mentioned in this scope. However, the applicable National & International Codes and Standards shall be among those which are either referred in the scope statement or shall be equivalent to the standards described above for the relevant scope category

IAF Scope 26B(i)
Gas Supply

City Gas Distribution

PNGRB's GSR 612(E) dated 27.08.2008 along with the latest amendments, national/ international standards mentioned therein, and relevant statutes

PNGRB's "Technical Standards and Specifications including Safety Standards for City or Local Natural Gas Distribution Network" Regulations, 2008

API 1104:2013

Standard for Welding Pipelines and Related Facilities

ASME 31.8:2012

Gas Transmission and Distribution System

IAF Scope 28 Construction

Buildings – Industrial;

IS 456:2000 (R2021)

Code of Practice for Plain and Reinforced concrete

Commercial;

IS 1786:2008 (Amd. 3-2017)

Specification for High Strength Deformed Steel Bars & Wires for Concrete Reinforcement

IS 1542:1992 (R2003)
IS 8112:2013 & IS 269:2015 (R2020)

Specification for sand for plaster
Specification for ordinary Portland Cement.

IS 1200:Part 1-1992 (R2022)

Methods of measurement of building and civil engineering works: Part 1 – Earthwork

IS 1200:Part 2-1974 (R2022)

Method of measurement of building and civil engineering works: Part 2 – Concrete works

IS 1200:Part 3-1976 (R2022)

Method of measurement of building and civil engineering works: Part 3 – Brick works

IS 1200:Part 4-1976 (R2022)

Method of measurement of building and civil engineering works: Part 4 – Stone Masonry

IS 1200:Part 5-2013 (R2018)

Method of measurement of building and civil engineering works: Part 5 – Frame Work

IS 1200:Part 6-1974 (R2022)

Method of measurement of building and civil engineering works: Part 6 – Refractory works

IS 1200:Part 7-2013 (R2018)

Method of measurement of building and civil engineering works: Part 7 – Hardware

IS 1200:Part 8-1993 (R2022)

Method of measurement of building and civil engineering works: Part 8 – Steelwork and Iron work

IS 1200:Part 9-1973 (R2022)

Method of measurement of building and civil engineering works: Part 9 – Roof Covering (Including Cladding)

IS 1200:Part 10-2013 (R2018)

Method of measurement of building and civil engineering works: Part 10 – Ceiling and Linings

IS 1200:Part 11-2013 (R2018)

Method of measurement of building and civil engineering works: Part 11 – Paving, Floor Finishes, Dado and skirting

IS 1200:Part 12-1976 (R2022)

Method of measurement of building and civil engineering works: Part 12 – Plastering and Pointing

IS 1200:Part 13-1994 (R2022)

Method of measurement of building and civil engineering works: Part 13 – Whitewashing, Colour Washing, Distempering & Painting of Building Surfaces

IS 1200:Part 14-1984 (R-2022)

Method of measurement of building and civil engineering works: Part 14 – Glazing

Method of measurement of building and civil engineering works: Part 15 – Painting, Polishing, Varnishing

IS 1200:Part 16-1979 (R2022)

Method of measurement of building and civil engineering works: Part 16 – Laying of water and sewer lines including appurtenant items

IS 1200:Part 18-1974 (R2022)

Method of measurement of building and civil engineering works: Part 18 – Demolition and Dismantling

IS 1200:Part 19-1981 (R2022)

Method of measurement of building and civil engineering works: Part 19 – Water Supply, Plumbing and Drains

IS 1200:Part 20-1981 (R2022)

Method of measurement of building and civil engineering works: Part 20 – Laying of Gas and Oil Pipelines

IS 1200:Part 21-1973 (R2022)

Method of measurement of building and civil engineering works: Part 21 – Wood work and Joinery

IS 1200:Part 22-1982 (R2022)

Method of measurement of building and civil engineering works: Part 22 – Materials

IS 1200:Part 23-1988 (R2022)

Method of measurement of building and civil engineering works: Part 23 – Piling

IS 1200:Part 24-1983 (R2022)

Method of measurement of building and civil engineering works: Part 24 – Well Foundations

IS 1200:Part 25-1971 (R2022)

Method of measurement of building and civil engineering works: Part 25 – Tunnelling

IS 1200:Part 26-1987 (R2022)

Method of measurement of building and civil engineering works: Part 26 – Acid Resistant Linings

IS 1200:Part 27-2013 (R2018)

Method of measurement of building and civil engineering works: Part 27 – earth work done by mechanical appliances

IS 1200:Part 28-1992 (R2017)

Method of measurement of building and civil engineering works: Part 28 – Sound Insulation works

IS 15658:2006 (R2020)

Concrete Paving Blocks –Specification

IS 15658:2006 (R2020)

Precast concrete blocks for paving – Specification

IS 383:2016

Specification for Fine and Coarse aggregate for concrete works

OR Client Requirements in the form of QAP mentioning required specification and scope mentioned in this scope. However, the applicable National & International Codes and Standards shall be among those which are either referred in the scope statement or shall be equivalent to the standards described above for the relevant scope category

IAF Scope 31a

Petroleum and Petroleum Product Pipelines (PPPL)

PNGRB’s F. No. PNGRB/Tech/15-IMSPPPLReg. / (1)/2021-Volume (3) (P-3385), dated: 27th Aug’2021 along with latest Amendments, national/ international standards mentioned therein and relevant statutes.

PNGRB’s Integrity Management System for Petroleum and Petroleum Products Pipelines Regulations, 2021.

Petroleum Installations (PI)

F. No. PNGRB/ Tech/7-T4SPI (1)/2020 along with latest amendments, national/ international standards mentioned therein and relevant statutes.

Petroleum & Natural Gas Regulatory Board (Technical standards and Specifications including safety Standards for Petroleum Installations) Regulations-2020 along with latest amendments.

Petroleum and Petroleum Product Pipelines (PPPL)

PNGRB’s GSR Infra/ T4S/ P&PPPL /01/2014 dated 12.02.2016 along with latest amendments, National/ International Standards mentioned therein and relevant statutes.

PNGRB’s “Technical Standards & Specifications including Safety Standards for Petroleum & Petroleum Products Pipelines” Regulations, 2016

01

D S Business Galleria, Office no.1209, 12th floor, LBS Marg, Kanjur Marg (West), Mumbai, Maharastra-400078

02

ISCON ATRIA - 1, 205, 2nd floor, Opp. GEB Training Institute, Gotri Road, Vadodara - 390021