IAF Scope 17a

Basic Metal Products

Stage wise / Final inspection

ASME Sec II Part A&B – 2021

BPVC SECTION II - Materials - Part A - Ferrous Material Specifications Part B - Non Ferrous Material specification

API 5L – 45^th Edition 2012

Specification for Line Pipe

IS 3589 - 2001 Amd. 4 : 2010

Steel pipes for water and sewage (168.3 to 2540 mm outside diameter) - specification

Mild Steel Pipes for water, Gas, Steam, and Air Line

IS 1239 - Part 1- 2004 & part 2 2011

Steel Tubes, Tubulars, and other wrought steel fittings

IS 2062 – 2011

Hot Rolled Medium and High tensile structural steel

IS 1079 – 2017

Hot rolled carbon steel sheet and strip

IS 1599 – 2012

Metallic Materials - Bend Test

NACE MR0175/ISO 15156 - 2020 4th Edition

Materials for use in H2S containing environment in Oil and Gas Production

IAF Scope 17b

Fabricated Metal Products

Pressure vessels, Tanks, Pressure parts & accessories, Steel pipe fabrication

Stage wise / Final inspection

ASME Sec VIII Div 1 : 2021

PD 442 - BPV code, Section VIII Division 1:- Design and Fabrication of Pressure Vessels

ASME Sec. IX – 2021

BPV Code, Section IX: Welding, Brazing and Fusing Qualifications

ASME Sec V- 2021

BPV Code, Section V: Non Destructive Examination

ASME B31.3 : 2020

Process piping

API 1104 : 2021

Standard for welding pipelines and related facilities

OR Client Requirements in the form of QAP mentioning required specification and scope mentioned in this scope. However, the applicable National & International Codes and Standards shall be among those which are either referred in the scope statement or shall be equivalent to the standards described above for the relevant scope category

IAF Scope 18

Machinery and Equipment

Pumps Horizontal / vertical, centrifugal Reciprocating

Stage wise / Final inspection

API 610 - 12th Edition: 2021

Centrifugal Pumps for Petroleum, Petrochemical and natural Gas Industries

API 685 - 2nd Edition: 2011

Seamless Centrifugal Pumps for Petroleum, Heavy duty chemical and Gas Industry services

IS 6595 (Part I) : 2018

Horizontal Centrifugal Pumps for clear, cold water (agricultural and rural water supply purposes)

IS 6595 (Part 2) - Part 2:1993 (R 2017 )

Horizontal Centrifugal Pumps for clear, cold water (other than agricultural and rural water supply purposes)

Valves

Stage wise / Final inspection

IS 9137 : 2019

Code for acceptance test for centrifugal, mixed flow and axial pumps  class C

IS 778 : 1984

Specification for Copper alloy Gate, Globe and check valves for water works purposes

API 6A – 21^st Edition: November 2018

Specification for Well head and Christmas Tree Equipment

API 6D – 25^th Edition: December 2021

Pipeline Transportation systems Pipeline valves

API 527 – 25^th Edition: December 2021

Seat tightness of Pressure relief valves

API 594 – 9^th Edition: February 2022

Check valves : wafer , Wafer Lug and double flanged type

Valve inspection and testing

API 600 – 14^th Edition: May 2021

Bolted Bonnet Steel Gate valves for Petroleum and Natural gas Industries

API 603 – 9^th Edition: September 2018

Corrosion resistant, Bolted Bonnet Gate valves- Flanged and Butt welding ends

API 607

Fire Test for Soft seated Quarter turn Valves

API 608 - 6^th Edition: January 2020

Metal Ball Valves- Flanged, threaded and welding ends

API 609 - 9^th Edition: April 2021

Butterfly Valves : - Double Flanged, Lug and wafer type

Steel Gate Valves—Flanged and Butt-welding Ends, Bolted Bonnets

Corrosion-resistant bolted bonnet gate valves

Metal Ball Valves—Flanged, Threaded, and Welding Ends

Butterfly Valves: Double-flanged, Lug- and Wafer-type, and Butt-welding Ends

OR Client Requirements in the form of QAP mentioning required specification and scope mentioned in this scope. However, the applicable National & International Codes and Standards shall be among those which are either referred in the scope statement or shall be equivalent to the standards described above for the relevant scope category

IAF Scope 19a

Electrical products

Insulated Wires & Cables

Stage wise / Final inspection

IEC 60502 - 1 : 2021

Power cable with extruded insulation and their accessories for rated voltages from 1 kV (Um-1.2 kV) upto 30 kV (Um-36 kV).

IEC 60502 - 2 : 2014

Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) – Part 2: Cables for rated voltages from 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV)

IEC 60227- 1 : 2007

Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V -General Requirement

IEC 60227- 2 : 2003

Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V – test methods

IS : 7098

Specification for Crosslinked polyethylene insulated PVC sheathed cable.

Part-1 : 2020

Part-1 for working voltage upto and including 1100V.

Part-2 : 2020

Crosslinked polyethylene insulated thermoplastic sheathed cable.

Part-2 for working voltage from 3.3 kV upto and including 33kV

Part-3 : 2014

Crosslinked polyethylene insulated thermoplastic sheathed cable.

Part-3 for working voltage from 66 kV upto and including 220 kV

IS:1554

Part-1, 2 : 2020,

PVC insulated (Heavy Duty) electric cables.

Part-1 for working voltage upto &

including 1100 V

Part-2 for working voltage from 3.3kV upto & including 11 kV

Electricity Distribution and control apparatus

IEC-60947-1 : 2014

Low voltage switchgear and control gear Part1 : General Rules

IEC-60947-2 : 2019

Part2 : Circuit Breakers

IEC-60947-3 : 2015

Part3 : Switches, disconnectors and fuse combination units

IEC-60947-4-1 : 2018

Part 4: - Contactors and motor starters - Electro mechanical

IEC-60947-5 -1 : 2020

Part 5: - Control circuit devices and switching elements -Electro mechanical control circuit devices.

IEC-62271-1 : 2021

High voltage switchgear and control gear Part 1: Common spec for alternating current switchgear and control gear.

IEC-62271-100 : 2021

Part 100: Alternating current circuit breakers

IEC-62271-200 : 2021

Part 200: AC metal enclosed switchgear and control gear for rated voltages above 1kV and upto & including 52 kV.

IEC 61439-1 : 2020

Low voltage switchgears and control gears assemblies – General Rules

IS:13947-5 : 2004

Low Voltage Switchgear and Controlgear Specification Part 5: Control Circuit Devices and Switching elements

IS:8623 Part-1, 2, 3 : 2004

Low voltage switchgear and control gear assemblies. Part-1 Requirements for type tested & partially type tested assemblies. Part-2 Particular requirements for Busbar trunking systems (Busway) Part-3 Particular requirements for Equipment where unskilled persons have access for their use.

Lighting equipments, Electric lamps

IEC 60079-0 : 2017

Electrical apparatus for explosive gas atmosphere - Part-0 General

Electric Motors, Generators

IEC-60598- 1 : 2021

Luminaires - Part 1: General requirements & tests

IEC-60598- 2-5 : 2015

Part 2-5: Particular requirements – Floodlights

IEC 60034-1 : 2021

Rotating electrical machines - Part 1: Rating and performance

Transformers

IS 12615 : 2018

Line Operated Three Phase a.c. Motors (IE CODE) “Efficiency Classes and Performance Specification

IEC 60076-1 : 2011

Power Transformers

IEC 60076-2 : 2011

Power Transformers Part-1 General

IEC 60076-3 : 2018

Part-2 Temperature rise

IEC 60076-4 : 2002

Part-3 Insulation levels, dielectric tests & external clearances in air

IEC 60076-5 Third Edition : 2006-02

Part-4 Terminal marking, tappings & connections.

IEC 60076-6 : 2007

Part-5 Ability to withstand short circuit.

Part-6 Reactors

IS 11171 : 2016

Specification for Dry type Power Transformers

IS 1180

Part-1 : 2014

Outdoor type oil immersed distribution transformers up to & including 2500 kVA, 33 kV specifications

Part-1 Mineral oil immersed

OR Client Requirements in the form of QAP mentioning required specification and scope mentioned in this scope. However, the applicable National & International Codes and Standards shall be among those which are either referred in the scope statement or shall be equivalent to the standards described above for the relevant scope category

Scope 19b      Electrical products

Instrument & Appliances for Measurement, Testing & Navigating

Stage wise / Final inspection

IEC 61511 : 2022 SER Series

Functional Safety

Safety instrumented systems for the process industry sector – All Parts

IEC 61508 : 2010

Functional Safety of Electrical/Electronic/Programmable electronic Safety related Systems

IEC 61158 : 2014 (Part 1 to 6)

Digital data communications for measurement and control-Fieldbus for use in industrial control systems

IEC 60534 : 2015 (Part 1 to 8)

Industrial Process Control Valves

IS 12754 : 2015 (Part 1 to 4)

Process Measurement Control Functions & Instrumentation

IS 13122 : 2016 (Part 1 to 2)

Transmitters for use in Industrial Process control system

IS 7722 : 2013

Analogue Pneumatic Signals for Process Control System

IS 7728 : 2015

Analogue DC current Signals for Process Control System

IS 8493 : 2015

Analogue DC voltage Signals for Process Control System

Process Control Equipment / System

IS 14570 : 2017

Electrical Measuring Transducers for converting AC electrical quantities to Analogue or Digital signals

IEC 61131 : 2018 (Part 1 to 9)

Programmable Controllers

IEC 62264 : 2016 (Part 1 to 6)

Enterprise Control System Integration

OR Client Requirements in the form of QAP mentioning required specification and scope mentioned in this scope. However, the applicable National & International Codes and Standards shall be among those which are either referred in the scope statement or shall be equivalent to the standards described above for the relevant scope category

Scope 26

Gas Supply

Gas Supply NGPL with item 26-A (i)

Stage wise

PNGRBs GSR 808(E) dated 11.11.2009 along with latest amendments, national/ international standards mentioned therein and relevant statutes

PNGRB’s Technical Standards and Specifications including Safety Standards for Natural Gas Pipelines Regulations, 2009

Gas Supply CGD with item 26-B (i)

Stage wise

PNGRBs GSR 612(E) dated 27.08.2008 along with latest amendments, national/ international standards mentioned therein and relevant statutes

PNGRB's "Technical Standards and Specifications including Safety Standards for City or Local Natural Gas Distribution Network" Regulations, 2008

Scope 28

Construction

Building construction Site preparation Completion and installation

Stage  wise / Final Inspection

IS 456: 2019

Plain and Reinforced Concrete Code of practice

IS 10262: 2019

Guidelines for concrete mix design proportioning

IS 516: 2022

Method of test for strength of concrete

IS 1077: 2008

Specification for common

burnt clay building bricks

IS 4925: 2004

Concrete batching and mixing plan

IS 4926: 2009

Code of practice ready-mixed concrete

Roads Bituminous and concrete

IS 2720: 2002

Method of test of soil

IS 3764: 1992

Code of safety for excavation work

IS 2911: 2010

Design and construction of pile foundation

IS 1742: 1983

Code of practice for building drainage

MORTH: 2001, IRC

Ministry of Road Transport and Highways (Indian Roads Congress)

S-3370 part- 1& 2 2021 (liquid retaining structure)

Design, Specification & Testing of Rigid and Flexible pavement.

(liquid retaining structure)

OR Client Requirements in the form of QAP mentioning required specification and scope mentioned in this scope. However, the applicable National & International Codes and Standards shall be among those which are either referred in the scope statement or shall be equivalent to the standards described above for the relevant scope category