IAF Scope 03
Food & food products

Inspection of a lot, Inspection of processes, sampling

IS: 2491:2013 Reaffirmed 2018

Food Hygiene – General Principles – Codes of Practice

IS: 1165:2002 Reaffirmed 2018

Milk Powder– Specification

IS: 1166:1986 Reaffirmed 2018

Specification for condensed milk, partly skimmed milk and skimmed condensed milk

IS: 1656:2007 Reaffirmed 2018

Milk-cereal based complementary foods – Specification

IS: 11536:2007 Reaffirmed 2012

Processed-cereal based complementary foods – Specification

IS: 11546:2012 Reaffirmed 2018

Milk and milk products – Guidance on Sampling

IS:13334 Part 1:2014 Reaffirmed 2019

Skimmed milk powder – Specification – Part 1 Standard Grade

IS:13334 Part 2 :2014 Reaffirmed 2019

Skimmed milk powder – Specification – Part 1 Extra Grade

IS 14433:2007 Reaffirmed 2018

Infant milk substitutes – Specification

IS 15757:2007 Reaffirmed 2018

Follow-up formula – complementary foods – Specification

In-process and Final Inspection

IS 14543: 2016

Packaged drinking water

IS 13428:2005 Reaffirmed 2018

Packaged Natural Mineral Water

IAF Scope 04
Textiles & textile products

Inspection of a lot, Inspection of processes, sampling

IS: 2491:2013 Reaffirmed 2018

Food Hygiene – General Principles – Codes of Practice

Inspection of Yarn, Fabric, Garments and Made-ups

Final Quality Inspection of Lot, Final Inspection

ISO 2859 - 1: 1999 (E)

Sampling procedures for inspection by attributes — Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection

Mask for Nose and Mouth Protection

Final Quality Inspection of Lot, Final Inspection

ANSI/ASQ Z1.4 2003 (R2018) or ISO 2859 or equivalent to the above standard

Sampling procedures for inspection by attributes — Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection

TUV Procedure As per Client PO, Specifications, Requirements for above mentioned products

IAF Scope 12

Chemical and Chemical Products

Final Inspection of Lot Quality, Inspection of manufacturing process as per BIS requirements, Witness of Sample Testing, Review of Test Reports

Applicable BIS Scheme requirements for Factory Inspection” for following products:

IS 252:2013

Caustic Soda –Specification

IS 10116 : 2015

IS 15573 : 2018

IS 695 : 2020

IS 2833:2019

IS 517 : 2020

IS 5158 : 1987


IS 8058 : 2018

IS 16113 : 2013

IS 16112 : 2013

IS 12084 : 2018

IS 297 : 2001

IS 7129 : 1992

IS 170 : 2004

IS 4581 : 1978


IS 11744:1986

IS 11657:1986

IS 2080:1980

IS 3205:1984

IS 12928:1990


IS 4505:2015

IS 6100:1984


IS 14709:1999

IS 336:1973

IS 5295:1985

IS 537:2011

IS 15030:2001

Boric Acid – Specification

Poly Aluminium Chloride

Acetic Acid

Aniline

Methanol

Specification for Phthalic Anhydride, Technical

Pyridine

Gamma Picoline

Beta Picoline

Morpholine

Sodium Sulphide, Technical

Potassium Carbonate, Anhydrous

Acetone

Phosphorous Trichloride, pure and Analytical Reagent

Phosphorous Pentachloride, Technical

Phosphorous Oxychloride, Technical

Stabilized Hydrogen Peroxide

Precipitated Barium Carbonate, Technical

Precipitated Barium for Ceramic and Glass Industry

Sodium Formaldehyde Sulphoxylate

Sodium Tripolyphosphate, Anhydrous, Technical

n- Butyl Acrylate

Ether

Ethylene Glycol

Toluene

Terephthalic Acid

IAF Scope 17

Basic metals- Ferrous & Non Ferrous alloys,
Steels in the shape of
Billets,Blooms, Slabs.

In process stage inspection, Final inspection

ASTM Section 1 - Iron & Steel Products

Volume 01.02 - 2019

Ferrous Castings; Ferroalloys

Raw materials in the form of plates, structural shapes, Castings, Cast Steel Pipes Forgings, pipes, rolled sections, Bars in different shapes, Line pipes, tubes, flanges, Fittings, Fasteners, metallic & nonmetallic Gaskets, Instrumentation Fittings.

Volume 01.01 - 2019

Steel--Piping, Tubing, Fittings

Volume 01.03 - 2019

Steel--Plate, Sheet, Strip, Wire; Stainless Steel Bar

Volume 01.04 - 2019

Steel--Structural, Reinforcing, Pressure Vessel, Railway

Volume 01.05 - 2019

Steel--Bars, Forgings, Bearing, Chain, Tool

Volume 01.06 - 2019

Coated Steel Products

ASME section II Part A -2019

Ferrous Material Specifications.

ASME section II Part B -2019

Non Ferrous Material Specifications.

IS 2062-2011

Specification for structural Steel

IS 1239-2011

Steel tubes & Tubulars

IS 3589-2001

Steel Pipes for water & sewage

Or equivalent to the above standards

Welding consumables

Stage inspection & certification

ASME Section II Part C - 2019

Specifications for welding rods, electrodes and filler metals.

Pressurized & Unpressurized Vessels, Strainers,
Steam Traps,
Expansion Bellows, Flame arrestors, Demister Pads, Tower internals, Flare stacks, Chimneys, Gas cylinders,

Design appraisal, Stage & Final inspection

ASME Section I - 2019

Rules for Construction of Power Boilers

Section III - 2019

Rules for Construction of Nuclear Facility Components

Section IV - 2019

Rules for Construction of Heating Boilers.

Section V - 2019

Non-destructive Examination

Section VIII - 2019

Rules for Construction of Pressure Vessels

• Division 1
• Division 2 -Alternative Rules
• Division 3 -Alternative Rules for Construction of High Pressure Vessels

Section IX - 2019

Welding, Brazing, and Fusing Qualifications

Section X 2019

Fiber-Reinforced Plastic Pressure Vessels

IS 2825-2017

Code for unfired pressure vessels

PD 5500 - 2019

Specification for unfired fusion welded pressure Vessels

Or equivalent to the above standards e.g.

• EN 13445-2018
• EN 12952-2016
• EN 12953-2012
• EN 14359-2017

Unfired Pressure VesselWater tube boilers Standards Shell boilers

Heat Exchangers,

Design appraisal, Stage & Final inspection

TEMA 9th Edition

Tubular exchangers manufacturers association

Storage Tanks,

Design appraisal, Stage & Final inspection

API 620 - 2018

Design & construction of large welded low pressure tanks

API 650 - 2018

Welded tanks for Oil Storage

API 653 - 2018

Tank Inspection, Repair,

Welded Structures for Onshore and Offshore Purpose,

Design appraisal, Stage & Final inspection

AWS D 1.1-2015

Structural welding code - Steel

Piping fabrication, installation & testing

Design appraisal, Stage & Final inspection

ASME B 31.1 - 2018

Power Piping

ASME B 31.3 - 2018
(Or equivalent to the above standards e.g. EN 13480, API 1104)

Process Piping

Or equivalent to the above standards

IAF Scope 18
Machinery & Equipment

Turbines,

In process stage inspection, Final inspection

API 616- 2011

Gas Turbines for Refinery Services

API 611 - 2014

General Purpose Steam Turbines for Petroleum, Chemical, and Gas Industry Services

API 612 - 2014

Petroleum, Petrochemical and Natural Gas industries
- Steam Turbines
- Special Purpose
Applications.

Centrifugal and Reciprocating Pumps,

Design appraisal, Stage & Final inspection

API 610-2011 & IS 5120-1977

Centrifugal Pumps

API 674-2016

Reciprocating pumps

API 675-2104

Positive Metering pumps

Compressors,

Stage & Final inspection

API 618-2016

Reciprocating compressors

Axial fans, Centrifugal Fans, Blowers,

Design appraisal, Stage & Final inspection

AMCA 210-2010

Testing of Fans

Gear boxes,

Final inspection

API 613-2007

Special Purpose Gear Units for Refinery Services

API 677-2016

General Purpose Gear Units for Refineries Services

Calibration of measuring & testing equipment,

Final inspection

IS 1828 Part I - 2015

Calibration of UTM

IS 1586 Part II - 2012

Calibration of Rockwell Hardness testing machine

IS 3766 - 1977

Calibration of charpy impact testing machine

Dryer units,

In process stage inspection, Final inspection

Approved drawings, datasheets, PO specs, PR, Mfr’s catalogue

Domestic appliances(Electric & non electric),

Final inspection

Approved drawings, datasheets, PO specs, PR, Mfr’s catalogue

HVAC systems,

In process stage inspection, Final inspection

Approved drawings, datasheets, PO specs, PR, Mfr’s catalogue

Diesel Generators

Final inspection

ISO 8528-1/ISO3046-1 - 2018

Reciprocating IC engine driven alternating current generating sets/Performance testing of DG sets

Industrial mixers,
Agitators

Design appraisal, Stage & Final inspection

Approved drawings, datasheets, PO specs, PR, Mfr’s catalogue

Cooling tower package

In process stage inspection, Final inspection

BS ISO 16345:2014

Water-cooling towers -- Testing and rating of thermal performance

All types of Cranes, Other lifting equipment and accessories,

Design appraisal, Stage & Final inspection

IS 14470-1997
Reaffirmed -2013

Cranes - Test code & procedures,

FEM 1.001

Rules for the Design of Hoisting Appliances

Conveyor systems, Machine Tools,

In process stage inspection, Final inspection

Approved drawings, datasheets, PO specs, PR, Mfr’s catalogue

FRP pressure vessels & tanks,

Design appraisal, Stage & Final inspection

BS 4994-1987

specification for the design and construction of vessels and storage tanks in reinforced plastics

Rotors

Final inspection

ISO 1940-1-2003

Mechanical vibration - Balance quality requirements for rotors in a constant (Rigid) state

Gratings,

Final inspection

ANSI/NAAMM MBG531-09

Metal Bar Grating Manual

All types of valves,

Design appraisal, Stage & Final inspection

API SPEC 6D-2017
API 526-2018
API 527 - 2014
ANSI/API STD 594-2017
API 598-2016
ANSI/API599-2013
ANSI/API600-2015
API 602-2015
ANSI/API603-2018
ANSI/API 607-2016
API 609-2016
API 6FA-2018
ANSI/API574-2016
ANSI/API 576-2017
ANSI/API 608-2012
Or equivalent to the above standards.

Inspection and testing of valves

Heaters

API 560
Or equivalent to the above standards.

Fired Heaters for General Refinery Service

IAF Scope 19

HT & LT motors

Stage & Final inspection

IEC 60034 - 2017

Rotating Electrical machines

IS 4029 - 2010, Refraied 2016

Guide for Testing Three Phase Induction Motors

Transformers

Stage & Final inspection

IS 2026 Part 1-2011, 2-2010, 3-2009, 4-1977, 5-2011, 6-2017, 7-2009 to 8-2009

Power Transformers

IS 11171-2016 (Reaffirmed)

Dry type power transformers

IS 3156 Part 1 to 4-1992 Reaffirmed 2012

Voltage Transformers

IS 1180 Part 1 & 2-2014

Outdoor type three-phase distribution transformers ...

IS 12021 - 2015

Control Transformers for Switchgear and
Control gear for Voltages not Exceeding 1 000 V ac

Insulated wires & cables

Stage & Final inspection

IS 7098 Part 1-1988,2-2011 and 3-1993

Specification
For Crosslinked
Polyethylene Insulated
PVC Sheathed Cables

IS 694-2010 Reaffirmed -2015

PVC insulated cables for working. Voltages up to and including. 1100 volts

IS 1554 Part 1 & 2-1988 Reaffirmed 2015

PVC insulated (heavy duty) electric cables

IS 14255-1995 Reaffirmed 2015

Aerial Bunched Cables for working Voltages upto and including 1100 Volts

Reactors

Stage & Final inspection

IS 5553 Part 1-1989, 2-1990, 3-1990, 4-1989, 5-1989, 6-1990, 7-1990 and 8-1990

Shunt reactors, Current
limiting and neutral
earthing reactors,
Damping reactors, Tuning
Reactor, Earthing
transformers
( Neutral couplers )
Arc suppression reactors
Smoothing reactors.

Relays

Stage & Final inspection

IS 3231-1986 Reaffirmed -2014

Specification for electrical relays for power system protection

Switch Gear

Stage & Final inspection

IS 12729/IEC 60298-2004 Reaffirmed 2014 IS 13947, IS/IEC 60947-1-1993 -Reaffirmed 2018

HV Switch gears & Control gears

IS 8623-Part 1 to 3-1993 Reaffirmed 2013

Low-Voltage Switchgear and Control gear
Assemblies

IS 62271-12008 Reaffirmed 2013

High-Voltage Switchgear and Controlgear

Variable frequency drives

Stage & Final inspection

IS 6297 Part 1 -1971 Reaffirmed 2017, 2-1973 Reaffirmed 2017, 3 and 4 -1972 Reaffirmed 2017

Specification for Transformers and
Inductors (Power, Audio, Pulse and Switching) for
Electronic Equipment

IEC 60146 Part 1 -2009 & 2-2011

Semiconductor convertors

Electrical measuring instruments

Stage & Final inspection

IS 1248 Part 1 to 9-2003 Reaffirmed -2018

Direct Acting Indicating Analogue electrical measuring instruments and their accessories

IS 12346-1999 Reaffirmed -2014

Testing Equipment for AC Electrical Energy Meters

accumulators, primary cells & batteries

Stage & Final inspection

IS 7372-1995 Reaffirmed 2012

Lead acid batteries for motor vehicles

IS 6303-2018

General requirements and methods of tests for dry cells and batteries

IS 15549-2005 Reaffirmed 2015

Stationary Regulated Lead Acid Batteries

IS 14782-2000 Reaffirmed 2015

Code of Practice for Maintenance and Testing of Large Lead Acid Batteries for Generating Stations and Substations

IS 10918-1984 Reaffirmed 2014

Vented type nickel cadmium batteries

Battery charger, Invertors, Convertors

Stage & Final inspection

IEC 146-2009

Rectifiers & Invertors

S 16242-2014

Uninterruptible Power Systems (UPS)

IS 13314-1992 Reaffirmed 2013

Solid state invertors run from storage batteries

Flame proof enclosures

Stage & Final inspection

EC 60079-2017

Flame proof equipment

Transmitters

Final inspection

IS 13122-2 (1991)

Transmitters for use in industrial process control systems

Analyzers

Final inspection

IS 13673-5-1999 Reaffirmed 2019

Expression of Performance of Electrochemical Analyzers

Flow meters

Final inspection

IS 15672 - 2006 Reaffirmed 2017

Flow measurement of natural gas and fluids by coriolis meters

IS 15674- 2006 Reaffirmed 2017

Flow measurement of natural gas by ultrasonic meter

S 15675- 2006 Reaffirmed 2017

Flow measurement of natural gas and fluid by orifice plate meters

Industrial process control equipment (PLC, DCS, SCADA, CCTV

IEC 61511-2018

Functional safety of instrumented system for process industry

IEC 61131- 2013

Programmable controllers

IEEE 472- 1974

Electrical surge protection

Approved drawings, datasheets, PO specs, PR, Mfr’s catalogue, CCOE, DMRI, FM, BASSEFA, BIS standards

Instrumentation products

FAT procedure approved by client/DEC

Industrial process Control equipment(PLC, DCS, SCADA, CCTV, Fire & Gas detection systems)

Gas leak detectors

IS 13432-1 - 1992 Reaffirmed 2013

Gas leak detector for use with low pressure
Liquefied petroleum
Gas burning appliances

Optical fiber cables

IS 13882 (Part 1/Sec 1) - 2001Reaffirmed 2016

Optical Fibres Cables, Part 1:
General Specification

Fire detection systems

IS 2189- 2008 Reaffirmed 2013

Selection, Installation and Maintenance of Automatic Fire Detection and Alarm System Code of Practice

IAF Scope 22
Other transport Equipment Manufacture of railway and tramway locomotives & rolling stock

Stage wise and finished (assembled) product (Railway Coaches) inspection, including machining, Assembly, Non Destructive, welding inspection

Customer requirements in the form of approved QAP, ITP, Technical work instructions, project specifications & requirements based on National and International codes and Standards as mentioned below:

Automotive Industry Standards:

AIS 37:2006- 2006




1S:813 1986 Reaffirmed 2013

1S:817-1966 Reaffirmed 2019



IS:2074- 1992 Reaffirmed 2014



IS:2932-2003 Reaffirmed 2014


IS:3658- 1999 Reaffirmed 2014


IS:5334- 2014


IS:9595- 1996 Reaffirmed 2019



AWS D1.1- 2015


IS:7307 -1974 Reaffirmed 2019



ASTM A 435- 2017

Procedure for Type Approval and Establishing Conformity of Production for Safety Critical Components

Scheme for symbols for welding

Code of Practice for training and testing of metal arc, welders

Ready Mixed paint, air drying, red oxide, zinc chrome priming specification

Enamel, synthetic exterior: (a)Undercoating, (b) Finishing,

Code of practice for liquid penetrant flaw detection,

Code of Practice for magnetic particle flaw detection of welds

Metal arc welding of carbon and manganese steels - Recommendation

Structural welding, Steel; Certification

Approval tests for welding Procedure - Fusion Welding of Steel

Straight beam ultrasonic examination of steel plates

IAF Scope 25

Electric power Generation, Transmission and Distribution- Renewable (Solar & Wind) and Transmission Line

Design Appraisal, Stage-wise, Final Inspection, Safety/Quality/Field Inspection of Construction, Commissioning, operation of Systems and associated components

IEC 62446- 1:2016 + AMD1: 2018

Photovoltaic (PV) System-Requirements for testing, documentation and maintenance - Part 1: Grid connected systems - Documentation, commissioning tests and inspection;

IEC 62446- 3:2017

Part 3: Photovoltaic modules and plants - Outdoor infrared thermography

IEC 61215- 1:2021

Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1: Test requirements.

IEC 61215- 2:2021

Part 2: Test procedures

IEC 61730- 1:2016

Photovoltaic (PV) module safety qualification - Part 1: Requirements for construction.

IEC 61730- 2:2016

Part 2: Requirements for testing

IEC 62109- 1:2010

Safety of power converters for use in photovoltaic power systems - Part 1: General requirements.

IEC 62109- 2:2011

Part 2: Particular requirements for inverters

IEC 62817:2014 + AMD1: 2017

Photovoltaic systems - Design qualification of solar trackers

IEC 61724- 1:2021
IEC 61724- 2:2016
IEC 61724- 3:2016

Photovoltaic system performance –
Part 1: Monitoring
Part 2: Capacity evaluation method

Part 3: Energy evaluation method

IEC 62093:2005

Balance-of-system components for photovoltaic systems - Design qualification natural environments

IEC 62548:2016

Photovoltaic Arrays Design requirements

IEC TS 62738:2018

Ground-mounted photovoltaic power plants - Design guidelines and recommendations

IEC 62817:2014 + AMD1: 2017

Photovoltaic systems - Design qualification of solar trackers

BS 2456:1990

Specification for floats (plastics) for float operated valves for cold water services

IEC 62446-1:2016 + AMD1: 2018

Photovoltaic (PV) systems - Requirements for testing, documentation and maintenance - Part 1: Grid connected systems - Documentation, commissioning tests and inspection

IEC/TS 63049:2017

Terrestrial photovoltaic (PV) systems - Guidelines for effective quality assurance in PV systems installation, operation and maintenance

IEC 61400-1:2019

Wind energy generation systems - Part 1: Design requirements

IEC 61400-3-1:2019
IEC 61400-3-2:2019

Wind energy generation systems - Part 3-1: Design requirements for fixed offshore wind turbines.
Part 3-2: Design requirements for floating offshore wind turbines

IEC 61400-12-1:2017
IEC 61400-12-2:2013

Wind energy generation systems - Part 12-1: Power performance
measurements of electricity producing wind turbines. Part 12-2: Power performance of electricity-producing wind turbines based on nacelle anemometry

IEC 61400-21:2019

Wind energy generation systems - Part 21-1: Measurement and assessment of electrical characteristics - Wind turbines

National Electricity Act 2003

National Electricity Act 2003

IEC 60204-1:2016

Safety of machinery - Electrical equipment of machines - Part 1: General requirements

IEC 60204-11:2018

Safety of machinery - Electrical equipment of machines - Part 11: Requirements for HV equipment for voltages above 1 000 V a.c. or 1 500 V d.c. and not exceeding 36 kV

IEC 61936-1:2021

Power installations exceeding 1 kV a.c. - Part 1: Common rules

IEC 60076-1:2011

Power transformers – Part 1: General

IEC 60947-1:2021

Low voltage switchgear and control gear-Part 1: General rules

IS: 432-1982-1 & : 1982

Mild steel & medium tensile steel bars & hard drawn steel wire for concrete reinforcement.

IS: 802:1:2015
IS:802:2:1978
IS: 802:3:1978

Code of practice for use of structural steel in overhead transmission line
Part 2: Fabrication, Galvanizing, Inspection and Packing
Part 3:Testing

IS: 800:2007

General Construction In Steel - Code of Practice

IS: 4091:1979

Code of practice for design and construction of foundations for transmission line towers and poles

IS: 5613: Part-1:1985

Code of practice for design,

Installation and maintenance of overhead power lines. Part-1 Lines up to and including 11 kV.

IS: 5613: Part-2:1985

Part: 2 Lines above 11 kV and up to and including 220 kV

IS: 5613: Part-3:1989

Part 3 Lines above 220 kV

IS: 3043- 2018

Code of Practice for Earthing

IS: 1255 -1983

Code of practice for installation and maintenance of power cables up to and including 33 kV rating

IS: 7215-1974

Specification for Tolerance for Fabrication of steel structures

Customer requirements in the form of Quality Assurance Plans, technical work instructions, Client specifications & drawings requirements based on above mentioned national & International Codes & Standards

IAF Scope 26
Gas Supply

Gas Supply-NGPL with item 26-A (iii)

Stagewise/In-service

1)PNGRB's GSR 808(E) dated 11.11.2009 along with latest amendments, national/ international standards mentioned therein and relevant statutes

1)PNGRB's "Technical Standards and Specifications including Safety Standards for Natural Gas Pipelines" Regulations, 2009

Gas Supply -CGD with item 26-B (iii)

Stagewise/In-service

2)PNGRB's GSR 612(E) dated 27.08.2008 along with latest amendments, national/ international standards mentioned therein and relevant statutes

IAF Scope 28

Site survey & infrastructure

Stage & Final inspection

Client specifications

Excavation, soil classification, backfilling, Compaction

Stage & Final inspection

IS 2720 Part 1 - 28 - Reaffirmed 2016

Methods of Test for Soils

IS 3764- 1992 Reaffirmed 2017

Code of safety for excavation work

S 1498- 1970 Reaffirmed 2016

Classification and identification of soils
for general engineering purposes

IS 10379- 1982 Reaffirmed 2015

Code of practice for field control of moisture and compaction of soils for embankment and subgrade

Plain cement concrete, Reinforced cement concrete & High performance concrete

Stage wise inspection of PCC,
RCC, HPC before, during & post concreting

IS 456- 2000 Reaffirmed 2016

Plain and Reinforced Concrete - Code of Practice

IS 3935- 1966 Reaffirmed 2017

Code of practice for composite construction

IS 13311 part 1 & 2- 1992 Reaffirmed 2013

Method of non-destructive testing of concrete

IS 10262- 2019

Concrete Mix design

IS 516- 1959 Reaffirmed 2013

Test for strength of concrete

ASTM Part C

Testing of High performance concrete

IS 9103- 1999 Reaffirmed 2013

Specification for Concrete Admixtures

IS 4925-2004 Reaffirmed 2015

Concrete Batching and Mixing Plant

IS 4926- 2003 Reaffirmed 2017

Code of Practice Ready-Mixed Concrete

IS 1642-2013

Code of practice for fire safety of buildings

Pile driving

Stage & Final inspection

S 2911 Part 1 to 4- 2010 Reaffirmed 2015

Design and construction of pile

Drainage systems

Stage & Final inspection

IS 1742- 1983 Reaffirmed 2017

Code of practice for building drainage

IS 12251- 1987 Reaffirmed 20141

Code of practice for drainage of building basements

Mechanical Electrical & Plumbing(MEP) works

Stage & Final inspection

IS 12183- 1987 Reaffirmed 2014

Code of practice for plumbing in multi-storied buildings

IS 2065-1983 Reaffirmed 2017

Code of practice for water supply in buildings

IS 732- 2019

Code of Practice for Electrical Wiring Installations

IS 12183 - 1987 Reaffirmed 2014

Code of practice for plumbing in multi- storeyed building

Fire fighting systems

Stage & final inspection

IS 3844- 1989 Reaffirmed 2015

Code of Practice for Installation and Maintenance of Internal Fire Hydrants and Hose Reels on Premises

IS 2189- 2008 Reaffirmed 2013

Selection, Installation and Maintenance of Automatic Fire-Detection and Alarm System - Code of Practice

National building code part IV -2016

Fire & Life Safety

Bridges, Roads, pre-stressed concrete

IRC 40-2002

Standard Specifications and Code of Practice for Road. Bridges

IRC 6-2017

Standard specifications and code of practice for road bridges.

Dams, metro/mono rail & other massive structures

IS 457- 1957 Reaffirmed 2019

Code of Practice for General Construction of Plain and Reinforced Concrete for Dams and Other Massive Structures

Masonary work

IS 2212- 1991 Reaffirmed 2014

Code of practice for brickworks

IS 2572- 2005 Reaffirmed 2015

Construction of hollow and solid concrete block masonry

IS 1905-1987 Reaffirmed 2017

Code of Practice for Structural use of Unreinforced Masonry

IS 1641, 1642, 1643-2013

Code of practice for fire safety of building

IS 1742 -1983 Reaffirmed 2017

Drainage

IS 9103- 1999 Reaffirmed 2013

Admixtures for concrete

Building Finishing works

Stage & final inspection

Or equivalent to the above standards

Client specifications

IAF Scope 29a
Wholesale & retail trade: Pre-shipment Inspection and Certificate of Conformity (CoC / VoC / CoI) for export.

Packaging and artwork verification, Quantity verification, Marking Verification, Visual Inspection, Measurements, Document Check.

As per Inspection Checklist, Work Instruction and Client's PO Specification as detailed in 1.WI/INSP/01/VOC Rev 00 -Verification of Conformity ( VOC) Procedure for Egypt
2.WI/INSP/02/VOC Rev 00 Pre shipment Inspection Work Instruction for Egypt covering the following products:

• Regulated Textile Products
• Ready-Made Garments including accessories like scarves, handkerchiefs, hats, gloves, etc.
• Home Textiles
• Carpets, Rugs and Floor Coverings
• Bags and purses made of textile
• Regulated Leather and Footwear Products
• Regulated other Products:
• Bags and purses made of leather
• Dairy products
• Canned and dried fruits
• Edible oils & Fats
• Chocolate and CoIa products
• Sugar products
• Pasta, grain products (bread) and bakery products
• Fruit juice
• Mineral, natural, sparkling water and perfume ingredients
• Soap and detergents
• Floor cover
• Tableware, cutleries and utensils
• Sanitary ware, tubs, sinks, toilet and toilet seats
• Toilet paper, sanitary & cosmetic paper and baby diapers
• Household tiles
• Table glassware
• Reinforced steel bars
• Household appliances (stoves, blinders, AC system, fans, washing machines, fryers, heaters)
• Offices & household furniture
• Bicycles and motorcycles
• Watches
• Household lighting equipment
• Toys

Petroleum, Chemical and Gas Cargo Inspection

Break Bulk Dry Cargo Inspection of Purified perthalic Acid (PTA), Polypropylene (PP), Ammonia, PVC Resin Bags)

Import Export Cargo Inspection - Break Bulk Dry Cargo Import / Export

WI - 01/PCG/BBDC/SOP/Rev. 01 Revision Date: 14-02- 2023

WI - 13/PCG/HP/SOP/Rev. 01 Revision Date: 14-02- 2023

WI -14/PCG/FM/SOP/Rev. 01 Revision Date: 14-02- 2023

WI - 15/PCG/VD/SOP/R Rev. 01 Revision Date: 14- 02-2023

Work Instruction for Inspection of Import & Export Cargo Inspection – Break Bulk Dry Cargo

Work Instruction for Cargo’s Handling Procedure

Work Instruction of Job File Management

Work Instruction for collecting all Vessel Documents

Cargo Inspection of Break Bulk : Petroleum (Petrol, Diesel, Naphtha, Fuel Oil, Kerosene, Light Diesel Oil (LDO), Aviation Turbine Fuel (ATF), Crude Oil, Reformate)

Import Export Cargo Inspection - Break Bulk Liquid Cargo Import / Export

WI - 02/PCG/BBLC/SOP/Rev. 01 Revision Date: 14-02- 2023

WI - 13/PCG/HP/SOP/Rev. 01 Revision Date: 14-02- 2023

WI -14/PCG/FM/SOP/Rev. 01 Revision Date: 14-02- 2023

WI - 15/PCG/VD/SOP/R Rev. 01 Revision Date: 14- 02-2023

Work Instruction for Inspection & Sampling Import & Export Break Bulk Liquid Cargo – Products

Work Instruction for Cargo’s Handling Procedure

Work Instruction of Job File Management

Work Instruction for collecting all Vessel Documents

Sampling of Break Bulk : Petroleum (Petrol, Diesel, Naphtha, Fuel Oil, Kerosene, Light Diesel Oil (LDO), Aviation Turbine Fuel (ATF), Crude Oil, Reformate)

Import Export Cargo Inspection - Break Bulk Liquid Cargo Import / Export

WI - 02/PCG/BBLC/SOP/Rev. 01 Revision Date: 14-02- 2023

WI - 13/PCG/HP/SOP/Rev. 01 Revision Date: 14-02- 2023

Work Instruction for Inspection & Sampling Import & Export Break Bulk Liquid Cargo – Products

Work Instruction for Cargo’s Handling Procedure

WI -14/PCG/FM/SOP/Rev. 01 Revision Date: 14-02- 2023

WI - 15/PCG/VD/SOP/R Rev. 01 Revision Date: 14- 02-2023

Work Instruction of Job File Management

Work Instruction for collecting all Vessel Documents

Cargo Inspection of Break Bulk Petrochemical (of Toluene, Benzene, Para-xylene, Acetone, Mix- xylene, Methanol, Ethyl Alcohol, Methyl tert-butyl ether (MTBE), Linear alkyl benzene (LAB), Vinyl acetate monomer (VAM), Propylene oxide, n- Butene).

Import Export Cargo Inspection - Break Bulk Liquid Cargo Import / Export

WI - 03/PCG/BBLC/SOP/Rev. 01 Revision Date: 14-02-2023

WI - 13/PCG/HP/SOP/Rev. 01 Revision Date: 14-02- 2023

WI -14/PCG/FM/SOP/Rev. 01 Revision Date: 14-02- 2023

WI - 15/PCG/VD/SOP/R Rev. 01 Revision Date: 14- 02-2023

Work Instruction for Inspection & Sampling of Import & Export Break Bulk Liquid Cargo – Petrochemicals

Work Instruction for Cargo’s Handling Procedure

Work Instruction of Job File Management

Work Instruction for collecting all Vessel Documents

Sampling of Break Bulk : Petrochemical (of Toluene, Benzene, Para-xylene, Acetone, Mix- xylene, Methanol, Ethyl Alcohol, Methyl tert-butyl ether (MTBE), Linear alkyl benzene (LAB), Vinyl acetate monomer (VAM), Propylene oxide, n- Butene).

Import Export Cargo Inspection - Break Bulk Liquid Cargo Import / Export

WI - 03/PCG/BBLC/SOP/Rev. 01 Revision Date: 14-02- 2023

WI - 13/PCG/HP/SOP/Rev. 01 Revision Date: 14-02- 2023

WI - 15/PCG/VD/SOP/R Rev. 01 Revision Date: 14- 02-2023

Work Instruction for Inspection & Sampling of Import & Export Break Bulk Liquid Cargo – Petrochemicals

Work Instruction for Cargo’s Handling Procedure

Work Instruction of Job File Management

Work Instruction for collecting all Vessel Documents

Cargo Inspection of Break Bulk : Chemical (of Sulphuric Acid, Phenol, Mono Ethyle Glycol, DI- Chloromethane, Styrene Monomer, Butyl Acrylate, Phosphoric Acid, Propylene Glycol Industrial, Nitric Acid, Acetic Acid, N-butanol, Analine Oil, Lauryl Alcohol, Alfa Olifine)

Import Export Cargo Inspection - Break Bulk Liquid Cargo Import / Export

WI - 03/PCG/BBLC/SOP/Rev. 01 Revision Date: 14-02- 2023

WI - 13/PCG/HP/SOP/Rev. 01 Revision Date: 14-02- 2023

WI -14/PCG/FM/SOP/Rev. 01 Revision Date: 14-02- 2023

WI - 15/PCG/VD/SOP/R Rev. 01 Revision Date: 14- 02-2023

Work Instruction for Inspection & Sampling of Import & Export Break Bulk Liquid Cargo – Petrochemicals

Work Instruction for Cargo’s Handling Procedure

Work Instruction of Job File Management

Work Instruction for collecting all Vessel Documents

Sampling of Break Bulk : Chemical (of Sulphuric Acid, Phenol, Mono Ethyle Glycol, DI- Chloromethane, Styrene Monomer, Butyl Acrylate, Phosphoric Acid, Propylene Glycol Industrial, Nitric Acid, Acetic Acid, N-butanol, Analine Oil, Lauryl Alcohol, Alfa Olifine)

Import Export Cargo Inspection - Break Bulk Liquid Cargo Import / Export

WI - 03/PCG/BBLC/SOP/Rev. 01 Revision Date: 14-02- 2023

WI - 13/PCG/HP/SOP/Rev. 01 Revision Date: 14-02- 2023

WI -14/PCG/FM/SOP/Rev. 01 Revision Date: 14-02- 2023
,br>WI - 15/PCG/VD/SOP/R Rev. 01 Revision Date: 14- 02-2023

Work Instruction for Inspection & Sampling of Import & Export Break Bulk Liquid Cargo – Petrochemicals

Work Instruction for Cargo’s Handling Procedure

Work Instruction of Job File Management

Work Instruction for collecting all Vessel Documents

Cargo Inspection of Break Bulk : Edible Oil/Base Oil (of Refine blend Palm Oil (RBD), Crude Sunflower Oil (CSFO), Crude Degummed Soyabean Oil (CDSBO), Ultra – 2/3/4/6/8, SK70N, 150N, 500N, 500S, BS150, H150).

Import Export Cargo Inspection - Break Bulk Liquid Cargo Import / Export

WI- 05/PCG/BBLC/SOP/Rev. 01 Revision Date: 14-02- 2023

WI - 13/PCG/HP/SOP/Rev. 01 Revision Date: 14-02- 2023

WI -14/PCG/FM/SOP/Rev. 01 Revision Date: 14-02- 2023

Work Instruction for Inspection & sampling of Import & Export Break Bulk Liquid Cargo – Oils

Work Instruction for Cargo’s Handling Procedure

Work Instruction of Job File Management

WI - 15/PCG/VD/SOP/R Rev. 01 Revision Date: 14- 02-2023

Work Instruction for collecting all Vessel Documents

Sampling of Break Bulk : Edible Oil/Base Oil (of Refine blend Palm Oil (RBD), Crude Sunflower Oil (CSFO), Crude Degummed Soyabean Oil (CDSBO), Ultra – 2/3/4/6/8, SK70N, 150N, 500N, 500S, BS150, H150).

Import Export Cargo Inspection - Break Bulk Liquid Cargo Import / Export

WI- 05/PCG/BBLC/SOP/Rev. 01 Revision Date: 14-02- 2023

WI - 13/PCG/HP/SOP/Rev. 01 Revision Date: 14-02- 2023

WI -14/PCG/FM/SOP/Rev. 01 Revision Date: 14-02- 2023

WI - 15/PCG/VD/SOP/R Rev. 01 Revision Date: 14- 02-2023

Work Instruction for Inspection & sampling of Import & Export Break Bulk Liquid Cargo – Oils

Work Instruction for Cargo’s Handling Procedure

Work Instruction of Job File Management

Work Instruction for collecting all Vessel Documents

Cargo Inspection of Break Bulk : Petroleum (Petrol, Diesel, Naphtha, Fuel Oil, Kerosene, Light Diesel Oil (LDO), Aviation Turbine Fuel (ATF), Crude Oil, Reformate, Jet A1)

Import Export Cargo Inspection - ISO Container Cargo Import / Export

WI- 07/PCG/ICC/SOP/Rev. 01 Revision Date: 14-02-2023

WI - 13/PCG/HP/SOP/Rev. 01 Revision Date: 14-02- 2023

Work Instruction for Inspection & sampling of Import & Export ISO Container

Work Instruction for Cargo’s Handling Procedure

WI -14/PCG/FM/SOP/Rev. 01 Revision Date: 14-02- 2023

WI - 15/PCG/VD/SOP/R Rev. 01 Revision Date: 14- 02-2023

Work Instruction of Job File Management

Work Instruction for collecting all Vessel Documents

Sampling of Break Bulk : Petroleum (Petrol, Diesel, Naphtha, Fuel Oil, Kerosene, Light Diesel Oil (LDO),Aviation Turbine Fuel (ATF), Crude Oil, Reformate, Jet A1)

Import Export Cargo Inspection - ISO Container Cargo Import / Export

WI- 07/PCG/ICC/SOP/Rev. 01 Revision Date: 14-02-2023

WI - 13/PCG/HP/SOP/Rev. 01 Revision Date: 14-02-2023

WI -14/PCG/FM/SOP/Rev. 01 Revision Date: 14-02-2023

WI - 15/PCG/VD/SOP/R Rev. 01 Revision Date: 14- 02-2023

Work Instruction for Inspection & sampling of Import & Export ISO Container

Work Instruction for Cargo’s Handling Procedure

Work Instruction of Job File Management

Work Instruction for collecting all Vessel Documents

Cargo Inspection of Break Bulk Petrochemical (of Toluene, Benzene, Para-xylene, Acetone, Mix- xylene, Methanol, Ethyl Alcohol, Methyl tert-butyl ether (MTBE), Linear alkyl benzene (LAB), Vinyl acetate monomer (VAM), Propylene oxide, n- Butane).

Import Export Cargo Inspection - ISO Container Cargo Import / Export

WI- 07/PCG/ICC/SOP/Rev. 01 Revision Date: 14-02-2023

WI - 13/PCG/HP/SOP/Rev. 01 Revision Date: 14-02- 2023

WI -14/PCG/FM/SOP/Rev. 01 Revision Date: 14-02- 2023

WI - 15/PCG/VD/SOP/R Rev. 01 Revision Date: 14- 02-2023

Work Instruction for Inspection & sampling of Import & Export ISO Container

Work Instruction for Cargo’s Handling Procedure

Work Instruction of Job File Management

Work Instruction for collecting all Vessel Documents

Sampling of Break Bulk Petrochemical (of Toluene, Benzene, Para- xylene, Acetone, Mix-xylene, Methanol, Ethyl Alcohol, Methyl tert- butyl ether (MTBE), Linear alkyl benzene (LAB), Vinyl acetate monomer (VAM), Propylene oxide, n- Butane).

Import Export Cargo Inspection - ISO Container Cargo Import / Export

WI- 07/PCG/ICC/SOP/Rev. 01 Revision Date: 14-02-2023

WI - 13/PCG/HP/SOP/Rev. 01 Revision Date: 14-02- 2023

WI -14/PCG/FM/SOP/Rev. 01 Revision Date: 14-02- 2023

WI - 15/PCG/VD/SOP/R Rev. 01 Revision Date: 14- 02-2023

Work Instruction for Inspection & sampling of Import & Export ISO Container

Work Instruction for Cargo’s Handling Procedure

Work Instruction of Job File Management

Work Instruction for collecting all Vessel Documents

Cargo Inspection of Break Bulk : Chemical (of Sulphuric Acid, Phenol, Mono Ethyle Glycol, DI- Chloromethane, Styrene Monomer, Butyl Acrylate, Phosphoric Acid, Propylene Glycol Industrial, Nitric Acid, Acetic Acid, N-butanol, Analine Oil, Lauryl Alcohol, Alfa Olifine)

Import Export Cargo Inspection - ISO Container Cargo Import / Export

WI- 07/PCG/ICC/SOP/Rev. 01 Revision Date: 14-02-2023

WI - 13/PCG/HP/SOP/Rev. 01 Revision Date: 14-02- 2023

WI -14/PCG/FM/SOP/Rev. 01 Revision Date: 14-02- 2023

WI - 15/PCG/VD/SOP/R Rev. 01 Revision Date: 14- 02-2023

Work Instruction for Inspection & sampling of Import & Export ISO Container

Work Instruction for Cargo’s Handling Procedure

Work Instruction of Job File Management

Work Instruction for collecting all Vessel Documents

Sampling of Break Bulk : Chemical (of Sulphuric Acid, Phenol, Mono Ethyle Glycol, DI- Chloromethane, Styrene Monomer, Butyl Acrylate, Phosphoric Acid, Propylene Glycol Industrial, Nitric Acid, Acetic Acid, N-butanol, Analine Oil, Lauryl Alcohol, Alfa Olifine)

Import Export Cargo Inspection - ISO Container Cargo Import / Export

WI- 07/PCG/ICC/SOP/Rev. 01 Revision Date: 14-02-2023

WI - 13/PCG/HP/SOP/Rev. 01 Revision Date: 14-02- 2023

WI -14/PCG/FM/SOP/Rev. 01 Revision Date: 14-02- 2023

WI - 15/PCG/VD/SOP/R Rev. 01 Revision Date: 14- 02-2023

Work Instruction for Inspection & sampling of Import & Export ISO Container

Work Instruction for Cargo’s Handling Procedure

Work Instruction of Job File Management

Work Instruction for collecting all Vessel Documents

Inspection of Dry Chemical of (Rock Phosphate, Zinc, Caustic in Powder form, Polypropylene (PP), Ammonia, PVC Resin Bags)

Import Export Cargo Inspection - Box Container Cargo Import / Export

WI - 08/PCG/BDC/SOP/Rev. 01 Revision Date: 14-02-2023

WI - 13/PCG/HP/SOP/Rev. 01 Revision Date: 14-02- 2023

WI -14/PCG/FM/SOP/Rev. 01 Revision Date: 14-02- 2023

WI - 15/PCG/VD/SOP/R Rev. 01 Revision Date: 14- 02-2023

Work Instruction for Inspection of Import & Export Cargo Inspection – Box Container Dry Cargo

Work Instruction for Cargo’s Handling Procedure

Work Instruction of Job File Management

Work Instruction for collecting all Vessel Documents

Inspection of Liquid Chemical (Caustic soda, Lube Oil, Base oil, Toluene, Benzene, Para- xylene, Mix-xylene, Methanol, Ethyl Alcohol, Ethanol, Methyl tert-butyl ether (MTBE), Linear alkyl benzene (LAB), Vinyl acetate monomer (VAM), Propylene oxide, Phenol, n-Butane).

Import Export Cargo Inspection - Box Container Cargo Import / Export

WI - 04/PCG/BBLC/SOP/Rev. 01 Revision Date: 14-02- 2023

WI - 13/PCG/HP/SOP/Rev. 01 Revision Date: 14-02- 2023

WI -14/PCG/FM/SOP/Rev. 01 Revision Date: 14-02- 2023

WI - 15/PCG/VD/SOP/R Rev. 01 Revision Date: 14- 02-2023

Work Instruction for Inspection & sampling of Import & Export Box Container – Chemicals

Work Instruction for Cargo’s Handling Procedure

Work Instruction of Job File Management

Work Instruction for collecting all Vessel Documents

Sampling of Liquid Chemical (Caustic soda, M Lube Oil, Base oil, Toluene, Benzene, Para-xylene, Mix-xylene, Methanol, Ethyl Alcohol, Ethanol, Methyl tert-butyl ether (MTBE), Linear alkyl benzene (LAB), Vinyl acetate monomer (VAM), Propylene oxide, Phenol, n-Butane).

Import Export Cargo Inspection - Box Container Cargo Import / Export

WI - 04/PCG/BBLC/SOP/Rev. 01 Revision Date: 14-02- 2023

WI - 13/PCG/HP/SOP/Rev. 01 Revision Date: 14-02- 2023

WI -14/PCG/FM/SOP/Rev. 01 Revision Date: 14-02- 2023

WI - 15/PCG/VD/SOP/R Rev. 01 Revision Date: 14- 02-2023

Work Instruction for Inspection & sampling of Import & Export Box Container – Chemicals

Work Instruction for Cargo’s Handling Procedure

Work Instruction of Job File Management

Work Instruction for collecting all Vessel Documents

Inspection of Flexi- Bag (Lube Oil, Base oil, MEG, DEG, Propylene Glycol Industrial)

Import Export Cargo Inspection - Box Container Cargo Import / Export

WI - 10/PCG/BCF/SOP/Rev. 01 Revision Date: 14-02-2023

WI - 13/PCG/HP/SOP/Rev. 01 Revision Date: 14-02- 2023

WI -14/PCG/FM/SOP/Rev. 01 Revision Date: 14-02- 2023

WI - 15/PCG/VD/SOP/R Rev. 01 Revision Date: 14- 02-2023

Work Instruction for Inspection & sampling of Import & Export Box Container- Flexi Bags

Work Instruction for Cargo’s Handling Procedure

Work Instruction of Job File Management

Work Instruction for collecting all Vessel Documents

Sampling of Flexi- Bag (Lube Oil, Base oil, MEG, DEG, Propylene Glycol Industrial)

Import Export Cargo Inspection - Box Container Cargo Import / Export

WI - 10/PCG/BCF/SOP/Rev. 01 Revision Date: 14-02-2023

WI - 13/PCG/HP/SOP/Rev. 01 Revision Date: 14-02- 2023

WI -14/PCG/FM/SOP/Rev. 01 Revision Date: 14-02- 2023

WI - 15/PCG/VD/SOP/R Rev. 01 Revision Date: 14- 02-2023

Work Instruction for Inspection & sampling of Import & Export Box Container- Flexi Bags

Work Instruction for Cargo’s Handling Procedure

Work Instruction of Job File Management

Work Instruction for collecting all Vessel Documents

Inspection of Gas Cargo Ship (Liquefied Petroleum Gas (LPG), Propane, Butane)

Import Export Cargo Inspection - Gas Cargo Ship Cargo Import / Export

WI - 06/PCG/GC/SOP/Rev. 01 Revision Date: 14-02-2023

WI - 13/PCG/HP/SOP/Rev. 01 Revision Date: 14-02- 2023

WI -14/PCG/FM/SOP/Rev. 01 Revision Date: 14-02- 2023

WI - 15/PCG/VD/SOP/R Rev. 01 Revision Date: 14- 02-2023

Work Instruction for Inspection & Sampling of Import & Export Gas Cargo – LPG

Work Instruction for Cargo’s Handling Procedure

Work Instruction of Job File Management

Work Instruction for collecting all Vessel Documents

Sampling of Gas Cargo Ship (Liquefied Petroleum Gas (LPG), Propane, Butane)

Import Export Cargo Inspection - Gas Cargo Ship Cargo Import / Export

WI - 06/PCG/GC/SOP/Rev. 01 Revision Date: 14-02-2023

WI - 13/PCG/HP/SOP/Rev. 01 Revision Date: 14-02- 2023

WI -14/PCG/FM/SOP/Rev. 01 Revision Date: 14-02- 2023

WI - 15/PCG/VD/SOP/R Rev. 01 Revision Date: 14- 02-2023

Work Instruction for Inspection & Sampling of Import & Export Gas Cargo – LPG

Work Instruction for Cargo’s Handling Procedure

Work Instruction of Job File Management

Work Instruction for collecting all Vessel Documents

Inspection of Shore Line, pigging operation, checking cleanliness and compabilities prior to import / export of shipment. Shore Tank Inspection, Empty tank Inspection, Gauging, Sampling, Outturn Report, Dispatch and Delivery Inspection.

Terminal Operation Import / Export -Shore Line Inspection Terminal & Shore Tank Inspection

WI - 11/PCG/STSL/SOP/Rev. 01 Revision Date: 14-02- 2023

WI - 13/PCG/HP/SOP/Rev. 01 Revision Date: 14-02- 2023

WI -14/PCG/FM/SOP/Rev. 01 Revision Date: 14-02- 2023

WI - 15/PCG/VD/SOP/R Rev. 01 Revision Date: 14- 02-2023

Work Instruction for Inspection of Import & Export Shore Tank & Shore Line

Work Instruction for Cargo’s Handling Procedure

Work Instruction of Job File Management

Work Instruction for collecting all Vessel Documents

Receipt Inspection (of Toluene, Benzene, Para- xylene, Acetone, Mix-xylene, Methanol, Ethyl Alcohol, Methyl tert- butyl ether (MTBE), Linear alkyl benzene (LAB), Vinyl acetate monomer (VAM), Propylene oxide, n- Butene, Sulphuric Acid, Phenol, Mono Ethyle Glycol, DI- Chloromethane,Styrene Monomer, Butyl Acrylate, Phosphoric Acid, Propylene Glycol Industrial, Nitric Acid, Acetic Acid, N-butanol, Analine Oil, Lauryl Alcohol, Alfa Olifine, Refine blend Palm Oil (RBD), Crude Sunflower Oil (CSFO), Crude Degummed Soyabean Oil (CDSBO), Ultra – 2/3/4/6/8, SK70N, 150N, 500N, 500S, BS150, H150).

Terminal Operation Import / Export -Road Tanker Inspection

WI - 12/PCG/ATT/SOP/Rev. 01 Revision Date: 14-02-2023

WI - 13/PCG/HP/SOP/Rev. 01 Revision Date: 14-02- 2023

WI -14/PCG/FM/SOP/Rev. 01 Revision Date: 14-02- 2023

WI - 15/PCG/VD/SOP/R Rev. 01 Revision Date: 14- 02-2023

Work Instruction for Inspection & Sampling of Import & Export Auto Tanker

Work Instruction for Cargo’s Handling Procedure

Work Instruction of Job File Management

Work Instruction for collecting all Vessel Documents

Delivery Inspection (of Toluene, Benzene, Para- xylene, Acetone, Mix-xylene, Methanol, Ethyl Alcohol, Methyl tert- butyl ether (MTBE), Linear alkyl benzene (LAB), Vinyl acetate monomer (VAM), Propylene oxide, n- Butane, Sulphuric Acid, Phenol, Mono Ethyl Glycol, DI- Chloromethane, Styrene Monomer, Butyl Acrylate, Phosphoric Acid, Propylene Glycol Industrial, Nitric Acid, Acetic Acid, N-butanol, Aniline Oil, Lauryl Alcohol, Alfa Olefin, Refine blend Palm Oil (RBD), Crude Sunflower Oil (CSFO), Crude Degummed Soybean Oil (CDSBO), Ultra – 2/3/4/6/8, SK70N, 150N, 500N, 500S, BS150, H150).

Terminal Operation Import / Export -Shore Line Inspection Terminal & Shore Tank Inspection

WI - 12/PCG/ATT/SOP/Rev. 01 Revision Date: 14-02-2023

WI - 13/PCG/HP/SOP/Rev. 01 Revision Date: 14-02- 2023

WI -14/PCG/FM/SOP/Rev. 01 Revision Date: 14-02- 2023

WI - 15/PCG/VD/SOP/R Rev. 01 Revision Date: 14- 02-2023

Work Instruction for Inspection & Sampling of Import & Export Auto Tanker

Work Instruction for Cargo’s Handling Procedure

Work Instruction of Job File Management

Work Instruction for collecting all Vessel Documents

IAF Scope 39
Other Social Services

Amusement Park Play Ground Equipment’s

Safety and Quality inspection during stage-wise construction, commissioning, In-Service

ISO 17842-1: 2015

Safety of Amusement Rides and Amusement devices- Design & manufacture

ISO 17842-2: 2015

Safety of Amusement rides & Devices- Operation & Use

ISO 17842-3: 2015

Safety of Amusement rides & Devices- Requirements for Inspection during Design, Manufacture, Operation & Use

EN 1176-1: 2017

Playground equipment & surfacing- General safety requirements and test methods

EN 14960-1: 2019

Inflatable play equipment- safety requirements and test methods

Or equivalent to the above standard. Customer requirements in the form of Quality Assurance plans, technical work instructions, Client specifications & drawings requirements based on national & International Codes & Standards mentioned above