IAF Scope 02

Mining & Quarrying

Coal Inspection & Sampling from Conveyors, Wagons, Ships, Stock Pile and Trucks

Stage wise / Final Inspection

IS 436 (Part -1, Section 1) 1964 (R 2019)

Methods for sampling of Coal and Coke Part 1 : Sampling of Coal Section 1 : Manual Sampling

Client Requirements in the form of QAP mentioning required specification and scope mentioned in this scope. However, the applicable National & International Codes and Standards shall be among those which are either referred in the scope statement or shall be equivalent to the standards described above for the relevant scope category

IAF Scope 14

Rubber and Plastic Products

HDPE Pipes

UPVC Pipes



Pressure Pipes

Cable Duct Pipe

Stage wise / Final Inspection

IS 4984 :2016

IS 4985: 2000 upto amendment 4 dtd March 2012

IS 12818: 2010

ASTM D1785:2015

IS 14787:2000 (R 2005)

Polyethylene Pipes for Water Supply-Specification Unplasticized PVC Pipes for Potable Water supplies

UPVC pipes for casing/bore well pipes.

Standard Specification for Poly Vinyl Chloride (PVC) Plastic Pipe, Schedules 40, 80 & 120

Un plasticized PVC Pipes (ducts) and fittings for underground Telecommunication Cable Installation- specification

SWR Pipes

Fabricated PVC Fittings for Portable Water Supplies

Gas Pipe

DWC Pipes

IS 13592:2013

IS 10124:2009

IS 14885:2001

IS 16098:2013 P-2

Un Plasticized Poly Vinyl Chloride (PVC-u) pipes for soil & water Discharge system for inside & Outside buildings including ventilation & rain water system specification
Fabricated PVC Fittings for Portable Water Supplies

Polyethylene pipes for the supply of Gaseous Fuel Specification ENGSPEC/01/03-R4 Technical specification for polyethylene pipe for natural gas (And suitable manufactured gases) for use at a pressure up to 4 bar All the above standards with latest amendments Structured wall plastics piping systems

Client Requirements in the form of QAP mentioning required specification and scope mentioned in this scope. However, the applicable National & International Codes and Standards shall be among those which are either referred in the scope statement or shall be equivalent to the standards described above for the relevant scope category

IAF Scope 17

Basic metals and Fabricated metal products

Plates, Pipes

Tubes

Stage wise/ Final Inspection

ASME SEC II PART A & B- 2023

IS 2062: 2011

ASME SEC II PART A & B-2023

IS 1161: 2014

IS 3601: 2006

API 5CT: 2018

EN 10255: 2013

Ferrous and Nonferrous Material Specifications
Hot rolled medium & high tensile structural steel.
Ferrous and Nonferrous Material Specifications
Steel tube for structural purpose – Specification.
Steel Tubes for mechanical and general engineering
Specification for Casing and Tubing.
Non-alloy steel tubes suitable for welding and threading. Technical delivery conditions.

Flanges, Fittings

Forgings

Castings

Pressure Vessels

ISO 2062: 2011

ASME SEC II PART A & B-2023

IS 2062 : 2011

ASME SEC II PART A & B-2023

IS 2062: 2011

ASTM (A,B,C,D,E,F,G)-2012,2013,2014,2015 & 2016

ASME Section VIII, Division 1 & 2 –2023

ASME Sec II:2023

Hot rolled medium & high tensile structural steel.

Ferrous and Nonferrous Material Specifications

Hot rolled medium & high tensile structural stee

Ferrous and Nonferrous Material Specifications

Hot rolled medium & high tensile structural steel.

American Society for Testing and Materials

Rule for Constructions of pressure Vessels and design of pressure vessels.

Specification for ferrous & Non-ferrous material, filler material, welding rods

ASME Sec. V: 2023

ASME Sec.IX : 2023

PD 5500: 2021

IS 2825 :2013

Specification for non-destructive examination

Welding and brazing specification.

British Standard specification for unfired fusion welded pressure vessel.

Indian Standard for unfired pressure vessels design and construction.

Line Pipes

ASME SEC II PART A & B:2023

ASTM (A,B,C,D,E,F,G)-2012,2013,2014,2015 & 2016

API 1104: Sept 2013

ASME 31.1: 2022

ASME 31.3: 2022

ASME 31.4: 2022

Ferrous and Nonferrous Material Specifications

American Society for Testing and Materials

Welding Pipe line and related facilities

Power Piping

Process Piping

Pipe line transportation system for liquid Hydrocarbons and other liquids

Tanks

ASME 31.8: 2022 API 650—2020 (13th Edition)

IS 803: 1976 (R2005)

API 653: November 2023 (13th Edition)

Gas Transmission and distribution system Welded Tank for Oil Storage

Code of Practice for Design, fabrication and erection of vertical mild steel cylindrical welded oil storage Tank

Tank Alteration, repair, Inspection and reconstruction

Structural fabrication

Coating

API 653: November 2023 (13th Edition) AWS D 1.1: 2015

IS 800: 2007

ISO 8501: 2007

Tank Alteration, repair, Inspection and reconstruction

Structural Welding code

General Construction in steel

Corrosion Protection of steel structures by painting

Machined Items

Boiler

Ductile Iron Pipes & Fittings

Stage-wise / Final inspection / In Service

In Service



Stage-wise / Final inspection

ISO 1456: 2009

Applicable Standards

ASME SECTION 1 : 2023

IBR 1950

BSEN: 545: 2010

Metallic and other inorganic coatings

Customer specified standard /requirement/ specifications are followed

Various equipment in service applications

Rule for Constructions of FIRED pressure Vessels

Indian Boiler Regulations

Ductile iron pipes, fittings, accessories

and their joints for water pipelines -

Requirements and test methods.

BSEN: 598: 2007+A1:2009

ISO: 2531:2009

IS: 8329: 2000(R2014)

Ductile iron pipes, fittings, accessories and their joints for sewerage applications. Requirements and test methods.

Ductile iron pipes, fittings,

accessories and their joints for water

Applications.

Centrifugally Cast (spun) Ductile Iron Pressure Pipes for Water, Gas And

Sewage-Specification.

BSEN: 598: 2007+A1:2009

IS: 9523: 2000(R2012)

Ductile iron pipes, fittings, accessories and their joints for sewerage applications. Requirements and test methods.

DDuctile Iron Fittings for Pressure Pipes for Water, Gas and Sewage -
Specification OR any equivalent standards (All the above standards with latest amendments )

Steel Pipes

Stage-wise / Final product

IS 1239(P-1):2004 & IS 1239 (P-2):2011 IS 3589-2001 Add.2010

Steel Tubes & Tubulars & Other Wrought Steel Fittings Specifications

Steel pipes for water & sewage (168.3 mm to 2540 mm OD) Specification

Client Requirements in the form of QAP mentioning required specification and scope mentioned in this scope. However, the applicable National & International Codes and Standards shall be among those which are either referred in the scope statement or shall be equivalent to the standards described above for the relevant scope category

IAF Scope 18

Machinery and Equipment

Pumps

Machinery and Equipment

Stage wise / Final Inspection

ISO 5199 : 2002

ISO 9906 :2012

IS 5120: 1977

API 610: 2021

API 674: 1910

API 675 : 2012 (R2021)

IS 6595: 2002

Technical Specification for Centrifugal Pump

Rotodynamic Pumps

Technical Specification for Rotodynamic special purpose Pumps.

Centrifugal Pumps for Petroleum, Petrochemical and Natural Gas Industries

Positive Displacement Pumps– Reciprocating

Positive Displacement Pumps

Controlled volume

Horizontal centrifugal pumps for clear cold water- specification

Pumps

Stage wise / Final Inspection

ISO 5199 : 2002

ISO 9906 :2012

IS 5120: 1977

API 610: 2021

API 674: 1910

API 675 : 2012 (R2021)

IS 6595: 2002

Technical Specification for Centrifugal Pump

Rotodynamic Pumps

Technical Specification for Rotodynamic special purpose Pumps.

Centrifugal Pumps for Petroleum, Petrochemical and Natural Gas Industries

Positive Displacement Pumps– Reciprocating

Positive Displacement Pumps

Controlled volume

Horizontal centrifugal pumps for clear cold water- specification

DG set (Prime Mover) Turbines

Stage-wise / Final Inspection

ASTM D7156 : 2019

ISO 18888 : 2017

ISO 19859 : 2016

API 612: 2020

AC generator driven by reciprocating internal combustion engines.

Gas turbine combined cycle power plants -- Thermal performance tests

Gas turbine applications -- Requirements for power generation

Petrochemical and Natural gas Industries – Steam Turbines- Special purpose application

Valves

API 6D : 2021

API 598 : 2023

ASME B16.34 :2013

IS 9890 : 1981

API 600 : 2021



API 602 : 2022



API 594 : 2022



ISO 17292 : 2015

Pipeline Valves

Valve Inspection and Testing

Valves -Flanged, threaded and welding end

Specification for general purpose ball valves

Bolted bonnet steel gate valves for petroleum and natural gas industry

Compact steel Gate valves – Flanged, Threaded, Welded, Extended body ends.

Check Valves – Flanged, Lug, Wafer, welded end connections.

Metal Ball valves for petroleum, petrochemical and allied industries.

Heat Exchangers

ASME Section VIII, Division 1 & 2 : 2023 TEMA 2007

IS 4503 : 1967

Rule for Constructions of pressure Vessels

The Tabular Exchangers Manufacturers Association

Specification for shell and tube type heat exchanger

Material Handling

FEM1.001 : 1998 Booklet 1 to 9

BS 2573 PART 1 : 1983

BS 2573 PART 2 : 1980



IS 3177 : 2020



IS 4137 : 2015



IS 807 : 2006

IS 4594 : 1968

Rules for the design of hoisting appliances

Rules for the design of cranes part 1

Rules for the design of cranes part 2. Specification for classification, stress calculations and design of mechanisms

Code of practice for electric overhead travelling cranes and gantry cranes other than steel work cranes

Code of practice for heavy duty electric overhead travelling cranes including

special service machines for use in steel works

Design, erection and testing (Structural portion) of cranes and hoists — code of practice

Design of Portal and Semi portal wharf cranes (electrical)

Client Requirements in the form of QAP mentioning required specification and scope mentioned in this scope. However, the applicable National & International Codes and Standards shall be among those which are either referred in the scope statement or shall be equivalent to the standards described above for the relevant scope category

IAF Scope 19

Electrical and optical equipment

a. Cables

b. Motors

c. Transformers

d. Battery Charger/UPS

e. Panels

f. Generator

g. Transmission Lines/ Towers

h. Switch yard/ Sub Station

Stage Wise / Final Inspection

IS -2026

Part 1 :2011

Part 2: 2010

Part 3: 2018



Part 4: 1977



Part 5: 2011

Part 6: 2017

Part 11 : 2021

Power Transformers (Oil):

Part 1 - General

Part 2 – Temperature Rise

Part 3 – Insulation Levels, dielectric tests and external clearance in air.

Part 4 – Terminal Markings, Tapping & Connections

Part 5 – Ability to withstand short circuit.

Part 6 - Reactor

Part 11 - Power Transformers: Dry-Type Transformers

IEC 60076

Part 1: 2011

Part 2: 2011



Part 3: 2013



Part 4: 2002



Part 5: 2006

Part 6: 2007

Part 11 : 2018

Power Transformer & Reactors (Oil): Part 1 - General

Part 2 – Temperature Rise for liquid immersed transformer

Part 3 – Insulation Levels, dielectric tests and external clearance in air.

Part 4 – Guide to lightning impulse and switching impulse testing- Power Transformer

Part 5 – Ability to withstand short circuit.

Part 6 – Reactors.

Part 11 - Power Transformers: Dry-Type Transformers

IS 2705

Part 1: 1992

Current Transformer Spec.

Part 1 – General Requirements

IEC 61869

Part 1 : 2023

Part 2 : 2012



Part 3 : 2011



Part 4: 2013

Part 5 : 2011

Instrument Transformer

Part 1 – General Requirements.

Part 2 - Additional requirements for current transformer

Part 3 - Additional requirements for Inductive Voltage transformer.

Part 4 - Additional requirements for combined transformer.

Part 5 - Additional requirements for Capacitor Voltage Transformer.

IS 16227

Part 1 : 2016

Part 2 : 2016



Part 3 : 2015



Part 4: 2015



Part 5 : 2015

Instrument Transformer

Part 1 – General Requirements.

Part 2 - Additional requirements for current transformer

Part 3 - Additional requirements for Inductive Voltage transformer.

Part 4 - Additional requirements for combined transformer.

Part 5 - Additional requirements for Capacitor Voltage Transformer

IS-1554

Part 1 :1988



Part 2 : 1988

IS-7098



Part 1 : 1988



Part 2 : 2011

Part 3 : 1993

IS-13369:1992

IS 1651 : 2013

IS 10918:1984

IEC 60092-350: 2020

Specification for PVC Insulated (Heavy Duty) Electric Cables

Part 1 – For working voltages up to and including 1100 Volts

Part 2 – For Working Voltages from 3.3 KV up to and including 11 KV.

Specification for Crosslinked PE insulated PVC sheathed Cables

Part 1 – For working voltages up to and including 1100 Volts

Part 2 – For Working Voltages from 3.3 KV up to and including 11 KV.

Part 3 – For Working Voltages from 66 KV up to and including 220 KV.

Stationary Lead Acid batteries (with tubular positive plates) in monobloc containers

Specification for vented type Ni-Cd batteries.

Electrical Installations In Ships - Part 350- General Construction & Test Methods Of Power, CONTROL & Instrumentation Cables for Shipboard & Offshore Applications

IS 5613

Part 1 : 1985

Part 2 : 1985

Part 3 : 1985

IS 325 : 1996

IS 4029 : 2010

IEC 60034

Part 1:2022

Part 2 : 2020



Part 3 : 2020





Part 4 : 2018





Part 5 : 2020





Part 6 : 1991

Part 7 : 2020



Part 8 : 2014



Part 9 : 2021

Part 11 : 2020

Part 12 : 2016

Code of Practice for design installation maintenance of overhead powerlines

Part 1 – Lines up to and including 11 kV

Part 2 – Lines up to and 220 kV

Part 3 – For 400kV lines.

Guide for testing three phase induction motor



Rotating Electrical Machines

Part 1 – Rating & Performance

Part 2 – Methods for determining losses and efficiency

Part 3 – Requirements for Synchronous generators driven by steam turbines or combustion gas turbines and for synchronous compensators.

Part 4 – Methods for determining electrically excited synchronous machines quantities from test

Part 5 – Degree of protection provided by the integral design of rotating electrical machines.

Part 6 – Methods of Cooling

Part 7 – Classification of types of construction, mounting arrangements and terminal box positions.

Part 8 – Terminal Marking and direction of rotation.

Part 9 – Noise Limits

Part 11 – Thermal Protection

Part 12 – Starting performance of single speed three phase cage inductive motor.

IS 10322

Part 1 : 2014

Part 5-1: 2012

IEC 60079



Part 14:2013

IS 3043: 2018

IS 13364



Part 1 : 1992

Part 2 : 1992

Other standards and specification for Scope 19.

Luminaries

Part 1 - General Requirements and test

Part 5/Sec 1 – Testing & Inspection for certification of fixed general

Equipment dust ignition protection by enclosure “t”

Explosive atmospheres

Part 14: Electrical installations design, selection and erection

Code of Practice for Earthing

AC Generators driven by reciprocating Internal Combustion Engines Specification

Part-1 Alternators Rated up to 20KVA

Part-2 Alternators Rated above 20KVA and up to 1250KVA

Client Requirements in the form of QAP mentioning required specification and scope mentioned in this scope. However, the applicable National & International Codes and Standards shall be among those which are either referred in the scope statement or shall be equivalent to the standards described above for the relevant scope category

IAF Scope 21

Aerospace

GSE/GHE, TTGE (Tools, Testers & Ground Equipment) & Non-Critical Aviation Stores

Final Inspection

HAL requirements in the form of Check sheet, drawings & specifications which are generally based on National and International Codes and standards.

IAF Scope 22

Other Transport Equipment

Railway Wagons and components for Railway Wagons

Stage Wise / final inspection

As per RDSO Specifications

Client requirements in form of QAP, customer specification, approved drawing and RDSO checklist

IAF Scope 26

Gas supply

SS26-C (i) - Natural Gas Pipelines as per NABCB Sub-sector categorization for Inspection Bodies for accreditation against PNGRB Regulations BCB 503 (O&G)-February 2021

In-service

F. No. Infra/IM/NGPL/1/2010 dated 05.11.2012 along with latest amendments, national and international standards mentioned therein and relevant statues

Petroleum and Natural Gas Regulatory Board (Integrity Management System for Natural gas pipelines) Amendment Regulations, 2012

SS26-D (ii) Liquefied Natural Gas facilities as per NABCB Sub-sector categorization for Inspection Bodies for accreditation against PNGRB Regulations [BCB 503 (O&G) February 2021

In-service

PNGRB’s F. No. INFRA/T4S/LNG/05. dated 18.01.2018 along with latest amendments, national and international standards mentioned therein and relevant statues

Petroleum and Natural Gas Regulatory Board (Technical Standards and Specifications including Safety Standards for Liquefied Natural Gas Facilities) Regulations, 2018.

IAF Scope 27

Water Supply

a. Conducting

assessment under Census Survey of Water Bodies

Inspection of Water Bodies

Finding of best practices and measure the cleanliness in and around the water bodies. By

• Direct Observation

• Data Acquisition through Technology Intervention

(Usage of Drone & Water Depth Measurement Instrument)

• Key Informant Interview

• Citizen feedback

As per requirement of : Ministry of Jal Shakti, Department of Water Resources, River Development & Ganga Rejuvenation –“Namami Gange Programme” Gazette Notification 3163 A / 02.09.2019 & 3187 ( A)/ 07.10.2016

b. Steam and hot water supply Collection, purification and distribution of water

Stage wise/ Final Inspection

IS 1172: 2016

SP 35(S&T)

AWS D1.1,2015

ASTM D 2513:2015

ASME Sec VIII 2015

IS 456:2000

SP 5:2007 (Part – IV)

Code of Basic requirements for Water Supply, Drainage and Sanitation Handbook on water supply and drainage

Structural Welding Code – Steel

Standard Specification for PE Gas pressure pipe, Turbine & Fittings

Rules for construction of Pressure Vessels.

Plain & Reinforced Concrete

National Building code of India



Client Requirements in the form of QAP mentioning required specification and scope mentioned in this scope. However, the applicable National & International Codes and Standards shall be among those which are either referred in the scope statement or shall be equivalent to the standards described above for the relevant scope category

IAF Scope 28

Construction

a. Bridges (Rail/Road)

b. Roads & Highways



c. Buildings

d. Dams & Canals

Stage wise/ Final Inspection or audit

IS 456:2000

IS 1786:2008

IS 516:1959 (2021)

IS 1199:1959 (2018)

IS 4926: 2003

IS 2911 (part I to IV)

IS 383

IS 2386

IS 269

MORTH

IRC 37

IRC15

IRC 44

IRC 83

IRC 78

IRC SP 71

Plain & Reinforced Concrete - Code Of Practice High Strength Deformed Steel Bars & Wires For Concrete Reinforcement

Methods of test for strength of concrete.

Methods of Sampling & analysis of concrete

Ready Mix Concrete

Pile foundation

Specs for fine & coarse agg.

Methods of test for agg.

Ordinary Portland Cement specification

Specifications for Roads and Bridges by Ministry of Road, Transport and Highways

Design of flexible roads

Construction of concrete roads

Design Mix for concrete

PQC Bearing

Standard Specifications And Code Of Practice For Road Bridges-Bearings

Standard Specifications And Code Of Practice For Road Bridges- Foundation

Pre-tensioned girders

Client specified standard /requirement/ specifications are followed. They generally include relevant National/ international standards such as BIS/MORTH/IRC

IAF Scope 31a

Transport Storage and Communication
Petroleum and Petroleum Products Pipelines

Stage-wise and In-Service

PNGRB’s GSR Infra/T4S/P&PPPL/ 01/2014 Dt 12.02.2016 along with latest amendments, National, International standards mentioned therein and relevant statutes.

Petroleum and Natural Gas Regulatory Board (Technical Standards and Specifications including Safety Standards for Petroleum and Petroleum Product Pipelines) Amendment Regulations, 2016

IAF Scope 31a

(IMS for PPPL)

In-service



Stage-wise and In-Service In-Service

PNGRB’s GSR Infra/T4S/P&PPPL/ 01/2014 Dt 12.02.2016 along with latest amendments, National, International standards mentioned therein and relevant statutes. PNGRB’s F. No. PNGRB/Tech/15-IMSPPPLReg. /(1)/2021-Volume (3) (P-3385). along with latest amendments, national and international standards mentioned therein and relevant statues





PNGRB’s F. No. PNGRB/Tech/6-T4SLPG/(1)/2019 Dt 12.02.2019 along with latest amendments, National, International standards mentioned therein and relevant statutes

Petroleum and Natural Gas Regulatory Board (Integrity Management System for Petroleum and Petroleum Products Pipelines) Regulations, 2021.





Petroleum and Natural Gas Regulatory Board (Technical Standards and Specifications including Safety Standards for LPG Storage, Handling and Bottling Facilities) Regulations, 2019

IAF Scope 34 (ii)

Engineering services

Stage-wise / In Service

GSR 39 (E) 18/01/2010, along with the latest amendment National & International Codes and Standards mentioned therein and relevant statutes

Petroleum and Natural Gas Regulatory Board (Codes of Practices for

Emergency Response and Disaster Management Plan (ERDMP)) Amendment Regulations, 2010

01

4th Floor, New Building, 52 A, Adi Shankaracharya Marg, Opposite Powai Lake, Powai, Mumbai – 400072, Maharashtra

02

“Diamond Heritage”, Unit 710 & 711, 7th Floor, 16, Strand Road, Kolkata - 700001

03

No 105x, 2nd Floor, 3rd main, 3rd cross 2nd Stage, Goraguntepalya, Yeshwanthpur Industrial Suburb, Bangalore – 560022

04

2nd Floor, House No.277, Suresh Santosh Bhawan, Bharat Nagar, Narela Sankri, Bhopal - 462022, Madhya Pradesh

05

KGN Towers, No.62, Ethiraj Salai, 6th Floor, B- Wing, Egmore, Chennai-600008, Tamil Nadu