NABCB Accredited Inspection Bodies
TÜV SÜD South Asia Pvt. Ltd.
Address TÜV SÜD House, Off Saki Vihar Road, Saki Naka, Andheri (East), Mumbai - 400072, India
Contact Person 1 Mr. Dharmendra Mishra
Designation Quality Manager
Tel +91 20 6754 5555
Fax +91 22 6754 5575
Email ID Dharmendra.Mishra@tuvsud.com
Website www.tuv-sud.in
Accreditation Cert. No.. IB 011
Valid From July 13, 2012
Valid Upto 12 Jul 2027
Accreditation Standard ISO/IEC 17020:2012
Type of Inspection Body Type A
 
Scopes of Accreditation

Field of Inspection

Type and Range of Inspection

Standards / Regulations / Methods / Procedures

Number identification
with year of
publication

Title

IAF Scope 03 Food

Frozen Cephalopods, Frozen Shrimps









Biscuits

In-line Product inspection / Finished Product Inspection / Sampling





Finished Product inspection / sampling

CAC/RM 42-1969



CAC/RCP 16-1978



CAC/RS 92-1976.



IS 1011: 2002 Reaffirmed on 2013

Codex Alimentarius Sampling Plans for Prepackaged Foods (AQL 6.5) CAC/RM 42- 1969

International Code of Practice for Frozen Fish, CAC/RCP 16-1978

International Code of Practice for Quick Frozen Shrimps or Prawns, CAC/RS 92-1976.

Indian Standard for Biscuit Specification

IAF Scope 17 a & b Basic Metal and Fabricated Metal Products


Plates, Coils, Bars, Rods, Sections, blooms, slabs, Bars, Flat, Wires Ferrous Alloys, structural Steels, Precious metals, Ferrous & Non-ferrous & alloy metal

Stage wise / Finished Product Inspection / Inspection of Lot.

Customer Requirements in the form of QAP mentioning required specification & scope, However the applicable National & International Codes and Standards shall be among those which are either referred in the scope statement or shall be equivalent to the standards described below for the relevant scope category.

BS EN 10085:2001

Nitriding steels, Steels, Case-hardening steels, Delivery, Condition of goods, Semi-finished products, Billets, Blooms, Slabs, Bars (materials), Flat (shape), Rolled products, Forgings, Heat treatment, Surface properties

BS EN 10095:1999

Heat resisting steels and nickel alloys

BS EN 10250-4:2000

Open steel die forgings for general engineering purposes. Stainless steels

BS EN 10084:2008

Case hardening steels. Technical delivery conditions

EN 10028: 2009

Flat products made of steels for pressure purposes. General requirements

BS EN 10087:1999

Free cutting steels. Technical delivery conditions for semi-finished products, hot rolled bars and rods

IS 2002: 2009

Steel plate for pressure vessel for intermediate and high temperature service including boilers

IS 1030,1998 (Fifth Revision)

Carbon steel castings for general engineering purposes - specification

IS 1030,1998 (Fifth Revision)

Carbon steel castings for general engineering purposes - specification

IS 7452, 2013

Hot trolled steel sections for doors, windows and ventilators-specification

IS IS 801:1975 (R2001)

Practice for Use Of Cold Formed Light Gauge Steel Structural Members In General Building Construction

IS 2102-1:1993 (R2003)

General Tolerances - Part 1: Tolerances for Linear and Angular Dimensions Without Individual Tolerance Indications.

IS 1239(Pt 1):2004

Steel Tubes, Pipes and Fittings

IS 1239(Pt 2):2011

Steel Tubes, Pipes and Fittings

IS 1875:1992 (R2004)

Carbon steel billets, blooms, slabs and bars for forgings

IS 4163:2014

Determination of Content of Nonmetallic Inclusions — Micrographic Method Using Standard Diagrams

IS 1570:1987

Schedules for Wrought Steels, Part 2: Carbon Steels (Unalloyed Steels), Section 2: Carbon Steel Wires with Related Properties

IS 4923: 1997 Hollow steel sections for structural use

IS 800:2007 Indian Code of Practice for Construction in Steel

IS 1732:1989 Steel bars, round and square for structural and general engineering purposes-dimensions

IS 10748 :2004 Specification of Hot Rolled Carbon Steel Skelp & Strips for manufacture of steel tubes & pipes

IS 7887:1992 Mild steel wire rod for general engineering purposes-specification

IS 2062 :2011  Hot Rolled Medium and High Tensile. Structural Steel

EN 47: 2012 Alloy Steel Round Bar

EN 10025-1,2,3 :2011/SANS 50025 Hot Rolled product of structural Steel
ASME SEC II Part A & B--2015 & 2017 Ferrous & Nonferrous  Material Specifications
ASTM (A,B,C,D,E F,G)- 2012, 2013, 2014, 2015 & 2016 American Society for Testing and Materials
ASTM A 516-2015 Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service
ASTM A 578-2012 Standard Specification for Straight-Beam Ultrasonic Examination of Rolled Steel Plates for Special Applications

ASTM E 381-2012 Standard Method of Macroetch Testing Steel Bars, Billets, Blooms, and Forgings

ASTM E 709-2015

Standard Guide for Magnetic Particle Testing

ASTM E 1444-2016

Standard Practice for Magnetic Particle Testing

ASTM A 388-2010

Standard Practice for Ultrasonic Examination of Steel Forgings

ASTM E 317-2016

Standard Practice for Evaluating Performance Characteristics of Ultrasonic Pulse-Echo Testing Instruments and Systems without the Use of Electronic Measurement Instruments

NACE MR 0175/ISO15156-2002 & 2015

Sulfide Stress Corrosion Cracking Resistant Metallic Material for oil field equipment

ASTM E 10-2015

Standard Test Method for Brinell Hardness of Metallic Materials

ASTM E 18-2016

Standard Test Methods for Rockwell Hardness of Metallic Materials

ASTM E 110-2014

Standard Test Method for Rockwell and Brinell Hardness of Metallic Materials by Portable Hardness Testers

ASTM E 23-2016

Standard Test Methods for Notched Bar Impact Testing of Metallic Materials

ASTM E 112-2013

Standard Test Methods for Determining Average Grain Size

ASTM B476 - 01(2012)

Standard Specification for General Requirements for Wrought Precious Metal Electrical Contact Materials

ASTM B844 - 98(2016)

Standard Guide for Silver-Tin Oxide Contact Material

ASTM Volume 02.04 -2014,2015 & 2016

Nonferrous Metals - Nickel, Titanium, Lead, Tin, Zinc, Zirconium, Precious, Reactive, Refractory Metals and Alloys: Materials for Thermostats, Electrical Heating and Resistance Contact, and Connectors

API 16A-2016

API Spec 16A (R2016). Specification for Drill Through Equipment

API 6A, 6D, 16A-2004

Specification for Wellhead & Christmas Tree Equipment

ASME V-2015

Non-destructive Examination

ASME VIII-2015

Rules for construction of pressure vessels

ASME IX-2015/PD 190

Welding, Brazing, and Fusing Qualifications.

DIN C 45/AISI 1045

Stainless steel round rods,

ASTM A 829:2014, (SAE 4140 / SAE 4142)

Standard Specification for Alloy Structural Steel Plates

Pipe Fittings

Stage wise / or Finished Product Inspection / Inspection of Lot

ASTM A 234, 2015

Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service

ASTM A 182, 2015

Specification for Forged or Rolled Alloy-Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service

EN 877, 1999

Specification for Cast Iron Pipes  and fittings

ASTM A 420, 2015

Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service

ASTM A 403, 2015

Specification for Wrought Austenitic Stainless Steel Piping Fittings

ASTM A 758, 2015

Specification for Wrought-Carbon Steel Butt-Welding Piping Fittings with Improved Notch Toughness

ASTM A 774, 2015

Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures

Tubes

Stage wise / Finished Product Inspection / Inspection of Lot

IS 1161, 2014

Steel Tubes for Structural Purposes - Specification

IS 3601, 2006

Steel Tubes for Mechanical and General ENG~EEWG Purposes — Specification

ASTM A 178, 2015

Specification for Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler and Super heater Tubes

ASTM A 179, 2015

Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes

ASTM A 192, 2015

Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service

ASTM A 209, 2015

Specification for Seamless Carbon-Molybdenum Alloy-Steel Boiler and Super heater Tubes

ASTM A 213, 2015

Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Super heater, and Heat-Exchanger Tubes

ASTM A 214, 2015

Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes

ASTM A 249, 2015

Specification for Welded Austenitic Steel Boiler, Super heater, Heat-Exchanger, and Condenser Tubes

API 5CT, 2011

Specification for Casing and Tubing

EN 10255, 2004

Non-alloy steel tubes suitable for welding and threading. Technical delivery conditions

Castings

Stage wise / Finished Product Inspection / Inspection of Lot

IS 1030, 1998

Carbon steel castings for general engineering purposes - specification

IS 2644, 1994

High strength steel castings for general engineering and structural purposes-specification

IS 1865, 1991

Iron Castings with Spheroidal or Nodular Graphite - Specification

ASTM A 915, 2015

Steel Castings, Carbon and Alloy, Chemical Requirements Similar to Standard Wrought Grades

IS 1030, 1998

Carbon steel castings for general engineering purposes - specification

ASTM A 958, 2015

Steel Castings, Carbon and Alloy, with Tensile Requirements, Chemical Requirements Similar to Standard Wrought Grades

ASTM A 781, 2015

Standard Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use

Forgings

Stage wise / Finished Product Inspection / Inspection of Lot

IS 2004, 1991

Carbon steel forgings for general engineering purposes-specification

ASTM A 788, 2015

Standard Specification for Steel Forgings, General Requirement

 

 

ASTM A 336, 2015

Alloy Steel Forgings for Pressure and High-Temperature Parts

 

 

ASTM A 372, 2015

Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels

 

 

ASTM A 473, 2015

Standard Specification for Stainless Steel Forgings

 

 

ASTM A 1049, 2015

Standard Specification for Stainless Steel Forgings, Ferritic /Austenitic (Duplex), for Pressure Vessels and Related Components

Pressurized and unpressurised Vessels & Piping, skids

Stage wise / Finished Product Inspection / Inspection of Lot 6

Codes, specifications and standards relevant to scope category mentioned under 17b as per detailed in A6

Customer Requirements in the form of QAP & scope mentioned in B10, However the applicable National & International Codes and Standards shall be among those which are either referred in the scope statement or shall be equivalent to the standards described below for the relevant scope category

 

ASME Sec VIII- 2015

Rules for construction of pressure vessels

 

 

IS 2825- 1969

Code for Unfired pressure vessels

 

 

EN 13445- 2014

Unfired Pressure Vessels

 

 

ASME B 31.3-2016

Process Piping & Piping Skids

ASME B 31.1-2016

Power Piping & Piping Skids

AWS D1.1 -2015

Structural Welding code

BS EN 545-2010

Ductile iron pipes, fittings, accessories and their joints for water pipelines. Requirements and test methods

BS EN 598 -2007+A1:2009

Ductile iron pipes, fittings, accessories and their joints for sewerage applications. Requirements and test methods

 

IS 3589-2001

Steel Pipes for Water and Sewage

 

 

IS 803:1976 (R2005)

Code of Practice for Design Fabrication and. Erection of Vertical Mild Steel Cylindrical Welded Oil. Storage Tanks

 

API 5L, 45TH Edition 2012, Includes Errata (2015)

Specification for line pipe

 

API 650-Twelfth Edition, Includes Errata 1 (2013), Errata 2 (2014), and Addendum 1 (2014) and Addendum 2 (2016)

Welded Tanks for Oil Storage,

 

API620, 12th Edition Amendment: API Std 620 Addendum 1 (2014)

Design and Construction of Large, Welded, Low-Pressure Storage Tanks

 

IS 2825:1969 (R2002)

Code For Unfired Pressure Vessels

 

 

AS 1210-2010 Amendment 2-2014

Pressure vessels

 

EN 13445-3:2014+A2:2016

Unfired pressure vessels

Boilers

Stage wise / Finished Product Inspection / Inspection of Lot

ASME Sec I, 2015

Power Boilers

 

 

EN 12952 & 12953, 2012

Water Tube Boiler standards & Shell Boiler standards

 

IBR 1950

Indian Boiler Regulations

 

 

EN 12952 -2015

Water-tube boilers, Steam boilers, Boilers, Auxiliary, Heating equipment, Heaters, Fired pressure vessels

 

EN 12953 -2012

Design, construction, testing, inspection and operation of electrically heated and directly fired shell boilers

Tanks

Stage wise / Finished Product Inspection / Inspection of Lot

IS 803, 1976

Code of practice for design, fabrication and erection of vertical mild steel cylindrical welded oil storage tanks

 

IS 10987, 1992

Code of fabrication, Practice for design, testing and installation, of under-ground/above-ground horizontal cylindrical steel storage tanks for petroleum products

 

API 620, 2013

Design and Construction of Large, Welded, Low-Pressure Storage Tanks

 

 

API 650, 2013

Welded tanks for oil storage

 

ASME Sec VIII 2015

Rules for construction of pressure vessels

Gas Cylinders

Stage wise / Finished Product Inspection / Inspection of Lot

IS 8198, 2004

Steel cylinders for compressed gases (atmospheric gases, hydrogen, high pressure liquefiable gases and dissolved acetylene gases) — code of practice

 

 

IS 15490, 2017

Cylinders for on-board storage of compressed natural gas as a fuel for automotive vehicles — specification

 

ISO 11119-3, 2013

Gas cylinders -- Refillable composite gas cylinders and tubes -- Design, construction and testing -- Part 3: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450L with non-load-sharing metallic or non-metallic liners

 

 

ISO 9809-2010

Refillable seamless steel gas cylinders -- Design, construction and testing

 

ISO11439-2013

High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles

ISO 4706-2008

Gas cylinders -- Refillable welded steel cylinders

 

NZS -5454-1989

Standard requirements for lightweight steel automotive compressed natural gas cylinders

 

 

BS EN 13322-1:2003+A1:2006

Transportable gas cylinders. Refillable welded steel gas cylinders. Design and construction. Carbon steel

 

ISO11120-2015

Refillable seamless steel tubes of water capacity between 150 l and 3000 l -- Design, construction and testing

BS EN 1442:2006+A1:2008

LPG equipment and accessories. Transportable refillable welded steel cylinders for LPG. Design and construction

 

DOT39 + Gas Cylinder Rules

Non reusable - non refillable cylinder

 

 

DOT 4BW ,DOT4BA-2003, .

Code of Federal Regulations--Welded steel cylinders made of definitely prescribed steels with electric-are welded longitudinal seam. Including DOT 4BA

Pipes [Ductile, Cast Iron, Carbon Steel, Ferrous, nonferrous, alloy steel, Seamless & Welded (without or with addition of filler wire)]

Stage wise / Finished Product Inspection / Inspection of Lot

IS 8329, 2000

Centrifugally cast (spun) ductile iron pressure pipes for water, gas and sewage - specification

IS 3589, 2001

Steel pipes for water and sewage

 

ASTM A 53, 2015

Seamless and Welded Standard Steel Pipe

 

 

API 5L, 45th Edition 2012

Specification for line pipe

 

ISO 2531, 2009

Ductile iron pipes, fittings, accessories and their joints for water applications

ASTM A 746, 2015

Standard Specification for Ductile Iron Gravity Sewer Pipe

 

ASTM A 716, 2015

Standard Specification for Ductile Iron Culvert Pipe

 

 

ASTM A 74, 2015

Standard Specification for Cast Iron Soil Pipe and Fittings

 

API 5L, 45TH Edition 2012

Specification for line pipe

Distillation Columns

Stage wise / Finished Product Inspection / Inspection of Lot

ASME SEC VIII 2015

Rules for construction of pressure vessels

Boilers

Design Review

EN 12952: Part 1 to Part 18: Latest Editions

Water Tube Boiler and Auxiliary Installations

ASME Sec I- 2021 Edition

Rules for construction of power boilers

IBR 1950 Including 2020 Amendment

Indian Boiler Regulations

ASME B 31.1-2020

Power Piping

EN 12953 Part 1 to Part 12: Latest Editions

Shell Boilers

Pressurized and unpressurised Vessels, Piping & skids

Design Review

ASME Sec VIII- Div.1 2021 Edition

Rules for construction of pressure vessels

IS 2825: 1969 (R2017)

Code for Unfired pressure vessels

EN 13445: Part 1 to Part 9: Latest Editions

Unfired Pressure Vessels

ASME Sec VIII- Div.2 2021 Edition

Rules for construction of pressure vessels – Alternative Rules

EN 13458: Part 1 & Part 2 2002

Cryogenic vessels. Static vacuum insulated vessels

EN 13530: Part 1 & Part 2 2002

Cryogenic Vessels - Large Transportable Vacuum Insulated Vessels

ISO 21029 Part 1 :2018 +A1 2019

Cryogenic Vessels - Large Transportable Vacuum Insulated Vessels

EN ISO 20421- Part 1 2019

Cryogenic Vessels - Large Transportable Vacuum Insulated Vessels.

ASME B 31.3-2020 Edition

Process Piping

EN 13480: Part 1 to Part 6: Latest

Metallic industrial piping

AS 1210: 2010

Pressure vessels

IS 10987, 1992 (R2017)

Code of fabrication, Practice for design, fabrication, testing and installation, of under-ground/above-ground horizontal cylindrical steel storage tanks for petroleum products

IS 803:1976 (R2017)

Code of Practice for Design Fabrication and Erection of Vertical Mild Steel Cylindrical Welded Oil. Storage Tanks

API 650:13th Edition,

Welded Tanks for Oil Storage,

API 620: 12th Edition

Design and Construction of Large, Welded, Low-Pressure Storage Tanks

TEMA Tenth Edition, published in 2019

Standards of The Tubular Exchanger Manufacturers Association

API 614, Revision: 5th Edition, April 2008

Lube Oil System Lubrication, Shaft-sealing and Oil-control Systems and Auxiliaries, Fifth Edition (ISO 10438:2008, Modified), Includes Errata (2008)

EN 14015, 2004

Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperature and above

Gas Cylinder

Design Review

IS 8198, 2004 (R2019)

Steel cylinders for compressed gases (atmospheric gases, hydrogen, high pressure liquefiable gases and dissolved acetylene gases) — code of practice

IS 15490, 2017

Seamless Steel Cylinders for on-board storage of compressed natural gas as a fuel for automotive vehicles — specification

ISO 11118, 2015+A1:2020

Gas cylinders — non-refillable metallic gas cylinders — Specification and test methods

ISO 11119-3, 2020

Gas cylinders -- Design, construction and testing of Refillable composite gas cylinders and tubes -- -- Part 3: Fully wrapped fiber reinforced composite gas cylinders and tubes up to 450L with non-load-sharing metallic or non-metallic liners or without liners

ISO 9809- Part 1 to Part 4: Latest Editions

Gas Cylinder -Design, construction and testing of Refillable seamless steel gas cylinders & tubes

ISO 4706-2008

Gas cylinders -- Refillable welded steel cylinders – Test pressure 60 bar and below

IS 15490-2017

Seamless Steel Cylinders for on-Board Storage of Compressed Natural Gas as a Fuel for Automotive Vehicles - Specification

EN 13322- Part 1 2003 +A1 2006

Transportable gas cylinders. Refillable welded steel gas cylinders. Design and construction. Carbon steel

EN 13322- Part 2: 2003 +A1 2006

Transportable gas cylinders. Refillable welded steel gas cylinders. Design and construction. Stainless Steel

ISO 11120-2015

Gas cylinders - Refillable seamless steel tubes of water capacity between 150 l and 3000 l -- Design, construction and testing

ISO 11439-2013

Gas Cylinder - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles

EN 1442: 2017

LPG equipment and accessories. Transportable refillable welded steel cylinders for LPG. Design and construction

DOT39 + Gas Cylinder Rules- Latest

Non-reusable, non-refillable cylinder

DOT 4BW, DOT 4BA-Latest

Code of Federal Regulations--Welded steel cylinders made of prescribed steels with electric-are welded longitudinal seam. Including DOT 4BA

 

IS 11556, 2005

Purchasers data sheets for distillation column

IAF Scope 18 Machinery and Equipment

Valves

Stage wise and/or Finished Product Inspection,Design Review

API 614, Revision: 5th Edition, April 2008

Lube Oil System Lubrication, Shaft-sealing and Oil-control Systems and Auxiliaries, Fifth Edition (ISO 10438:2008, Modified), Includes Errata (2008)

 

 

API 598- Revision: 10th Edition, October 2016

Valve Inspection and Testing

IS 9890 1981(R2018).

Specification for general purpose ball valves

EN12266-1 2012

Testing of metallic valves.

 

EN 1626 -2008

Valves for cryogenic service

 

 

EN 334-2019

Gas pressure regulators for inlet pressures up to 100 bars

 

API 600, 14th Edition

Bolted bonnet steel gate valves for petroleum and natural gas industries

EN 593 -2017

Industrial valves - Metallic butterfly valves for general purpose

 

EN 1171-2015

Industrial valves — Cast iron gate valves

EN 1349 -2009

Industrial process control valves

 

EN 1983-2013

Industrial valves — Steel ball valves

EN 1984-2010

Industrial valves — Steel gate valves

EN 12284-2003

Refrigerating systems and heat pumps — Valves — Requirements, testing and marking

 

EN 12288-2010

Industrial valves — Copper alloy gate valves

EN 16767-2020

Industrial valves — Metallic check valves

EN 13397-2001

Industrial valves — Diaphragm valves made of metallic materials

 

EN 13709 :2010

Industrial valves — Steel globe and globe stop and check valves

EN 13789 -2010

Industrial valves — Cast iron globe valves

EN 16767:2020

Industrial valves — Metallic check valves

 

API 622 3rd Edition, July 2018

Type Testing of Process Valve Packing for fugitive Emissions

API 624 1st Edition, February 2014

Type Testing of Rising Stem Valves Equipped with Graphite Packing for Fugitive Emission

ISO 15848-1:2015

Industrial Valves-Measurement. test and qualification procedures for fugitive emissions-Part 1: Classification system & qualification procedures for type testing of valve

 

ISO 15848-2:2015

Industrial Valves-Measurement. test and qualification procedures for fugitive emissions-Part 2: Production acceptance test of valves

API 602, 10th Edition 2015

Compact Steel Gate Valves—Flanged, Threaded, Welding, and Extended-Body Ends

ASME B16.34, 2020

Valves—Flanged, Threaded, and Welding End

 

EN 16668­- 2016 + A1 2018

Industrial valves –Requirements and testing for metallic valves as pressure accessories

EN 12516-4, 2014+A1:2018

Industrial valves. Shell design strength. Calculation method for steel valve shells

ASME B16.34:2013

Valves—Flanged, Threaded, and Welding End

EN 12516:2014

Industrial valves. Shell design strength. Calculation method for steel valve shells

IAF Scope 19 Electrical Machinery and Apparatus

Transformers

Stage wise / Finished Product Inspection / Inspection of Lot

IEC 60076-1:2011

Power transformers - Part 1: General

MCC, Junction Boxes, Control Panels, Switch Gears, Manufacture of electricity distribution and control apparatus e.g. Switchgear (HT/LT), Panels, PCC, MCC, APFC VFD, CT, PT, Flameproof & Weather proof equipments, Junction Boxes, Insulated Wire and Cables, Lighting, equipments, Push Button Stations and Electrical lamps, Outdoor units and IPMS for Telecom sector, Pressure Gauges, earthing , electrical resistance, Flameproof enclosure, luminaires and electrical installation classification etc.

Stage wise / Finished Product Inspection / Inspection of Lot

IS 13947 Part5 Sec2 Publication Year:2004 Reaffirmed Year 2009

Low-Voltage Switchgear and Controlgear - Part 5 : Control Circuit Devices and Switching Elements - Section 2 : Proximity Switches

IS 8623 : Part 1 Publication Year:1993 Reaffirmed Year 2008

Low-Voltage Switchgear and Controlgear Assemblies - Part 1 : Requirements for Type-Tested and Partially Type-Tested Assemblies

IS 8623 : Part 2 Publication Year:1993 Reaffirmed Year 2008 Amd 1

Low-voltage Switchgear and Controlgear Assemblies - Part 2 : Particular Requirements for Busbar Trunking Systems (Busway)

IS 8623 : Part 3 Publication Year:1993 Reaffirmed Year 2008 Amd 1

Controlgear Assemblies - Part 3 : Particular Requirements for Equipment Where Unskilled Persons have Access for Their Use

IEC 61439: 2011

Low-voltage switchgear and control gear assemblies

IS 732: 1989 Reaffirmed Year 2015

Code of Practice for Electrical Wiring Installations

. IEC 61869-11:2017

Instrument transformers - Part 11: Additional requirements for low power passive voltage transformers

IEC 62790: 2014

Junction boxes for photovoltaic modules - Safety requirements and tests

IEC 61439-1: 2011

Low-voltage switchgear and control gear assemblies - Part 1: General rules

IEC 61439-2:2011

Low-voltage switchgear and controlgear assemblies - Part 2: Power switchgear and controlgear assemblies

IEC 61439-3:2012

Low-voltage switchgear and control gear assemblies - Part 3: Distribution boards intended to be operated by ordinary persons (DBO)

IEC 61439-4:2012

Low-voltage switchgear and control gear assemblies - Part 4: Particular requirements for assemblies for construction sites (ACS)

IEC 61439-5:2014

Low-voltage switchgear and control gear assemblies - Part 5: Assemblies for power distribution in public networks

IEC 61439-6:2012

Low-voltage switchgear and controlgear assemblies - Part 6: Busbar trunking systems (busways)

IS 13947-5, 2004

Low-Voltage Switchgear and Control gear, Part 5: Control Circuit Devices and Switching Elements, Section 2: Proximity Switches [ETD 7: Low Voltage Switchgear and Control gear]

IS 732:1989 Reaffirmed 2015

Code of Practice for Electrical Wiring Installations

IEC 62271-1:2017

High-voltage switchgear and controlgear - Part 1: Common specifications for alternating current switchgear and controlgear

IS 8623-1993

Low-Voltage Switchgear and Control gear Assemblies, Part 1: Requirements for Type-Tested and Partially Type-Tested Assemblies

BIS IS 13947-1:1993 (R2004)

Specification For Low-Voltage Switchgear And Control gear

IEC 60947-1:2007+AMD1:2010+AMD2:2014 CSV

Low-voltage switchgear and controlgear - Part 1: General rules

IEC 60947-2:2016 RLV

Low-voltage switchgear and controlgear - Part 2: Circuit-breakers

IEC 60947-3:2008+AMD1:2012+AMD2:2015 CSV

Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units

IS 1356 : Part 1:1972 Reaffirmed Year 2016

Electrical equipment of machine tools:Part 1 Electrical equipment of machines for general use

IS 2675:1983 Reaffirmed Year 2016

Enclosed distribution fuseboards and cutouts for voltages not exceeding 1000 V Ac and 1200 V Dc

IS 12021:2015

Control Transformers for Switchgear and Controlgear for Voltages Not Exceeding1 000 V a.c. - Specification (First Revision)

IS 2071 Part 1 Reaffirmed Year 2016

High-voltage Test Techniques Part 1 General Definitions and Test Requirements ( Third Revision )

IS 2071 : Part 3 Publication Year 1976,Reaffirmed Year:2006

Methods of high voltage testing: Part 3 Measuring devices

IS 5572:2009

Classification of hazardous areas (other than mines) having flammable gases and vapours for electrical installation

EN 837 -1998

Stainless steel diaphragm pressure gauges

IS 10322 -2014

Luminaires Part 1 General Requirements and Tests

IEC60079 -2011

Electrical resistance trace heating -- General and testing requirements

IS 3043 -1987 Reaffirmed Year:2016

Code of practice for earthing

IS 5572 -2009

Classification of hazardous areas (other than mines) having flammable gases and vapours for electrical installation.

IEC 60529:1989+AMD1:1999+AMD2:2013 CSV

Degrees of protection provided by enclosures (IP Code)

Manufacture of accumulators, primary cells and primary batteries like (UPS, Battery, Battery chargers etc.)

Stage wise / Finished Product Inspection / Inspection of Lot

IEC 62646-2012 & 2016

Nuclear power plants – Control rooms – Computer based procedures

IS 1651:2013

Stationary cells and batteries, lead-acid type (with tubular positive plates)/p>

IS 10918:1984 Reaffirmed Year:2008

Vented type nickel cadmium batteries

EN 50091-1-2:1998

Uninterruptible Power Systems (ups) - General And Safety Requirements For Ups Used In Restricted Access Locations

IS13314-1992 Reaffirmed:2008

Solid state inverters run from storage Batteries

ISA 5.2:1976 (R1992)

Binary Logic Diagrams For Process Operations Gives a method of logic diagramming of binary interlock and sequencing systems

NFPA 72-2016

National Fire Alarm and Signaling Code

Manufacture of industrial process control equipment e.g. (PLC, DCS, CCTV, Fire & Gas detection system etc.)

Stage wise / Finished Product Inspection,

IEC 60584-1:2013

Thermocouples - Part 1: EMF specifications and tolerances

IEC 60584-3:2007

Thermocouples - Part 3: Extension and compensating cables Tolerances and identification system

IS11360 -1985 Reaffirmed Year :2015

Specification for Smoke Detectors for Use in Automatic Electrical Fire Alarm System

Manufacture of Optical Fibre Cables, Instruments

IS/IEC 60794-1-1-2001

Fibre Optics, Cables and Devices

Manufacture of Optical Fibre Cables, Instruments

Stage wise / Finished Product Inspection

IS 1554 : Part 2:1988 Reaffirmed Year:2008

PVC Insulated (Heavy Duty) Electric Cables - Part 2 : For Working Voltages From 3"3 KV Up To And Including 11 KV

IS 1554 : Part 1:1988 Reaffirmed Year:2008

PVC Insulated (heavy Duty) Electric Cables: Part 1 For Working Voltages Up to And Including 1 100 V

IS7098-Part 1: 1988 Reaffirmed Year:2015

Crosslinked Polyethylene Insulated PVC Sheathed Cables: Part 1 For Working Voltage Upto And Including 1 100 V

IS 7098 : Part 2:2011 Reaffirmed Year:2016

Crosslinked Polyethylene Insulated Thermoplastics Sheathed Cables - Part 2 For Working Voltages From 3.3 KV Up To And Including 33 KV

IS 7098 : Part 3:1993 Reaffirmed Year:2014

Cross-linked Polyethylene Insulated Thermoplastic Sheathed Cables: Part 3 For Working Voltages From 66 KV Up to And Including 220 KV.

IS 694:2010 Reaffirmed Year:2015

Polyvinyl Chloride Insulated Unsheathed--And Sheathed Cables/cords With Rigid And--Flexible Conductor For Rated Voltages--Up To And Including 1100 V

IS 692:1994 Reaffirmed Year:2010

Paper Insulated Lead-sheathed Cables For Rated Voltage Upto And Including 33 Kv Specification

IS/IEC 60794: PART 1: SEC :1 :2001

Optical Fibre Cables: Part 1 Generic Specification: Section 1 General

IS/IEC 60794: Part 2:2002

Optical Fibre Cables Part 2 Indoor Cables - Sectional Specification

IS 5950:1984 Reaffirmed Year:2016

Shot Firing Cables (for Use Other Than In Shafts)

IAF Scope 26

Gas Supply –NGPL with item 26A(iii)


Stagewise / In-service


1)PNGRB’s GSR 808(E) dated 11.11.2009 along with latest amendments, national/ international standards mentioned therein and relevant statutes


1)PNGRB’s “Technical Standards and Specifications including Safety Standards for Natural Gas Pipelines” Regulations, 2009

Gas Supply –CGD With item 26B(iii)

Stagewise / In-service

2)PNGRB’s GSR 612(E) dated 27.08.2008 along with latest amendments, national/ international standards mentioned therein and relevant statutes

2)PNGRB’s “Technical Standards and Specifications including Safety Standards for City or Local Natural Gas Distribution Network” Regulations, 2008

Gas Supply –CGD With item 26C(ii)

In-service

3)PNGRB’s Infra/IMP/CGD/1/2013 dated 16.05.2013 along with national/ international standards mentioned therein and relevant statutes

3)PNGRB’s “Integrity Management System for City or Local Natural Gas Distribution Network” Regulations, 2013

Gas Supply – NGPL With item 26-C(i)

In-service

4) PNGRB’s Infra/IM/NGPL/1/2010 dated 05.111.2012 along with national/ international standards mentioned therein and relevant statutes

4) PNGRB’s “Integrity Management System for Natural Gas Pipelines” Regulations, 2012

IAF Scope 27 Water
Steam and hot water supply
Collection, purification and distribution of water

Stage-wise / Final inspection

Central Public Health and Environmental Engineering Organization. (CPHEEO) 3rd Edition May’1999

IS 1172: 2016



SP 35 (S&T) : 2014

Manual on Water Supply & Treatment



Code of Basic Requirements for Water Supply, Drainage and Sanitation

Handbook on Water Supply and Drainage (with Special Emphasis on Plumbing

AWS D 1.1, 2015

Structural Welding Code - Steel

ASTM D 2513:2015

Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings

ASME Sec VIII 2015

Rules for construction of pressure vessels

API 1104:2013

Welding of Pipelines and related Facilities

Amendment Regulations, 2016

PNGRB T4S Regulations

ASME B31.4-2016

Pipeline Transportation Systems for Liquids and Slurries, ASME Code for Pressure Piping

EN 334:2005+A1:2009

Gas pressure regulators for inlet pressures up to 100 bar

EN 14382:2005+A1:2009+AC:2009

Safety devices for gas pressure regulating stations and installations - Gas safety shut-off devices for inlet pressures up to 100 bar

c) Safety check and reporting on PNG, CNG, NG gas pipelines

Stage wise and/or Finished Product Inspection,

PNGRB Technical Standards and Specifications including Safety Standards (T4S) Regulations - API-

Customer requirements in the form of QAP etc. and technical procedures which are generally based on National and International Codes and Standards PNGRB Technical

MPMS or any equivalent standards, Codes , specifications and standards relevant to scope category mentioned under 26 as per detailed in F1

Standards and Specifications including Safety Standards (T4S) Regulations - API-MPMS or any equivalent standards

IAF Scope 28 Construction

A) Inspection for Building Const. (Prime Activities Only)

Stage-wise / Final inspection

National Building Code of India 2016 (NBC 2016) - Volume 1 & 2

B) Roads & Highways

Stage-wise / Final inspection

MoRTH Specifications for Road and Bridge Works- Fifth Revision)

C) Bridges

Stage-wise / Final inspection

MoRTH Specifications for Road and Bridge Works- Fifth Revision)

IAF Scope 29 Wholesale & Retail Trade

Retail sale- Petrol Products

Quality, Quantity and Service verification

Customer specified methods and equivalent standards

IAF Scope 39 Other Social Services

Sewage and refuse disposal, sanitation and similar activities

Final Inspection

As per QCI guidelines

 
The following offices of TÜV SÜD South Asia Pvt. Ltd. is/are included under accreditation

S.No

Office(s)

Address

Key activities performed

01

Main office

TÜV SÜD House,
Off. Saki Vihar Road, Saki Naka, Andheri (E), Mumbai-400072, Maharashtra, India

Top management functions, quality management system functions, administration & accounts, other key activities as applicable to main office.

Inspection contract review, Inspection planning & execution, Inspection personnel authorization & assignment, Issue of inspection reports / certificates.

02

Branch office

TÜV SÜD South Asia –
G-11, First Floor, Sector-11, Dist. Gautam Budh Nagar, Noida- 201301

Inspection contract review, Inspection planning & execution, Inspection personnel authorization & assignment, Issue of inspection reports / certificates.

03

Branch office

TÜV SÜD South Asia,
408, Third Eye One, Opp. Havmor, Near Panchvati Circle, C.G. Road, Ahmedabad-380009, Gujarat, India

Inspection contract review, Inspection planning & execution, Inspection personnel authorization & assignment, Issue of inspection reports / certificates.

04

Branch office

TÜV SÜD South Asia Pvt. Ltd.
1st & 4th Floor, No: 11 & 13, Origin Towers- Type 2, Dr.Vikram Sarabhai Instronic Estate (VSI Estate), Thiruvanmiyur, Chennai – 600041, Tamil Nadu, India.

Inspection contract review, Inspection planning & execution, Inspection personnel authorization & assignment, Issue of inspection reports / certificates.

 Print 
 Close 
Close Search Window