Rubber Diaphragm used in Pressure switch for QPH Application in Electric Locos
RDSO/M&C/RP-141/2020 (Revision2.0)
Rubber Gasket for Relays
RDSO/M&C/RP-155/2020 (Revision2.0)
Rubber Lining for 16 – Axle Special Wagons
RDSO/M&C/RP-159/2020 (Revision2.0)
Rubber Roller for Flexible Coupling of Diesel Locos
RDSO/M&C/RP-168/2020(Revision2)
Moulded Fluorocarbon Elastomeric Seals and Gaskets
RDSO/M&C/RP-179/2020(Revision2)
Ultra-high molecular weight – high density polyethylene (UHMW-HDPE) components,
RDSO/M&C/RP-180/2020(Rev 1.0)
Moulded polytetrafluoroethylene (PTFE)
Components
RDSO/M&C/RP-185/2020 (Rev2)
Rubber Expansion Joint for Concrete Bridge Deck
Plastic Products
UPVC Pipes, Screen & Casing Pipe, Pipe for Suction & Delivery, HDPE Pressure Pipes, HDPE
Sprinkler Pipe Plastic Piping Systems – Polyethylene (PE) Pipes for Water Supply, Fabricated and
Machined HDPE Fittings for Potable Water Supplies, Injection Moulded HDPE Fittings for Water Supply,
HDPE
Stage wise/ Final Inspection
IS 4985 : 2021
Unplasticized PVC Pipes for Potable Water Supplies Specification
Fittings for Potable Water Supplies
IS 4984 : 2016 (Reaffirmed Year : 2021 )
Polyethylene Pipes for Water Supply - Specification (Fifth Revision)
IS 14885 : 2022
Polyethylene Pipes for the Supply of Gaseous Fuels-Specification
IS 14333 : 2022
Polyethylene Pipes for Sewerage and Industrial Chemicals and Effluent-Specification
IS 14930 : Part 2 : 2001 (Reaffirmed Year : 2016 )
Conduit Systems for Electrical Installations
IS 3076 : 1985
Low Density Polyethylene Pipes for Potable Water Supplies
IS 16205: 2017
Conduit Systems for Cable Management
IS 2508 : 2016 (Reaffirmed Year : 2022 )
Polyethylene Films and Sheets — Specification
IS 10889 : 2004 (Reaffirmed Year : 2016 )
High density polyethylene films
IS 13592 : 2013 (Reaffirmed Year : 2018 )
Unplasticized Polyvinyl Chloride (PVC-U) Pipes for Soil and Waste Discharge System Inside and
Outside Buildings Including Ventilation and Rainwater System
IS 12818 : 2010 (Reaffirmed Year : 2021 )
Unplasticized Polyvinyl Chloride (pvc-u) screen And Casing Pipes For Bore/tubewell
IS 12701 : 1996 (Reaffirmed Year : 2022 )
Rotational Moulded Polyethylene Water Storage Tanks
ISO 4427: 2019 All parts
Plastics piping systems for water supply, and for drainage
and sewerage under pressure — Polyethylene (PE) Part 1:2019 General, Part 2: 2019/ Amd1:2023
Pipes, Part 3: 2019 Fittings, Part 5:2019 Fitness for purpose of the system
ISO 4437: 2022 All parts
Plastics piping systems for the supply of gaseous fuels Polyethylene (PE)
Part 1:2014 General, Part 2: 2014 Pipes, Part 3: 2014 Fittings, Part 4:2022 Valves, Part 5:2014
Fitness for purpose of the system
ISO 8779:2020
Plastics piping systems Polyethylene (PE) pipes for irrigation
ISO 11298: 2018
Plastics piping systems for renovation of underground water supply networks
ISO 12176
Plastics pipes and fittings Equipment for fusion jointing polyethylene systems
ISO 21809-1:2018
Petroleum and natural gas industries External coatings for buried or submerged pipelines used in
pipeline transportation systems. Part 1: Polyolefin coatings (3-layer PE and 3-layer PP)
ISO 21809-2:2014
Petroleum and natural gas industries External coatings for buried or submerged pipelines used in
pipeline transportation systems Part 2: Single layer fusion-bonded epoxy coatings
ISO 21809-3:2016
Petroleum and natural gas industries
External coatings for buried or submerged pipelines used in pipeline transportation systems Part
3: Field joint coatings
ISO 21809-4:2009
Petroleum and natural gas industries
External coatings for buried or submerged pipelines used in pipeline transportation systems Part
4: Polyethylene coatings (2-layer PE)
IS 12818 : 2010 (Reaffirmed Year : 2021 )
Unplasticized Polyvinyl Chloride (pvc-u) screen And Casing Pipes For Bore/tubewell
IS 2530 : 1963 (Reaffirmed Year : 2018)
Methods of test for polyethylene moulding materials and polyethylene compounds
ISO 1452
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under
pressure unplasticized poly vinyl chloride PVC-U) Part 1:2009 General, Part 2: 2009 Pipes, Part
3: 2009 Fittings, Part 4:2009 Valves, Part 5:2009 Fitness for purpose of the system
IS 9763:2000 (Reaffirmed Year : 2020 )
Plastics Bib Taps, Pillar Taps, Angle Valves and Stop Valves for Hot and Cold Water Services
IS 15778 : 2007 (Reaffirmed Year : 2022 )
Chlorinated polyvinyl chloride (CPVC) pipes for potable hot and cold water distribution supplies
IS 15801 : 2008 (Reaffirmed Year : 2022 )
Polypropylene-random copolymer pipes for hot and cold water supplies
IS 15450 : 2022
Polyethylene-aluminium-polyethylene composite pressure pipes for hot and cold water supplies
IS 14787 : 2000 (Reaffirmed Year : 2020 )
Unplasticized PVC Pipes (Ducts) and Fittings for Underground Telecommunications Cable Installation
IS 16098 Part 1 : 2013 (Reaffirmed Year : 2022 )
Structured-Wall Plastics Piping Systems for Non-Pressure Drainage and Sewerage
ASTM D1785:2021
Standard Specification for Poly Vinyl Chloride (PVC) Plastic Pipe, Schedules 40, 80, and 120
ASTM D2241:2020
Standard Specification for Poly Vinyl Chloride (PVC)
Pressure-Rated Pipe (SDR Series)
ASTM D3350:2021
Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
ASTM D2513-20
Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings
IS 9271 : 2004 (Reaffirmed Year : 2014 )
Unplasticized Polyvinyl Chloride (UPVC) Single Wall Corrugated Pipes for Drainage
IS 14151 : Part 1 : 1999 (Reaffirmed Year : 2021 )
IS 14151 : Part 2 : 2008 (Reaffirmed Year : 2021 )
Irrigation Equipment - Sprinkler Pipes : Part 2 Quick Coupled Polyethylene Pipes and fittings
IS 13488 : 2008 (Reaffirmed Year : 2021 )
Irrigation Equipment -emitting Pipes System
IS 12786 : 1989 (Reaffirmed Year : 2021 )
Irrigation Equipment - Polyethylene Pipes for Irrigation Lateral
BS EN 1555:2021
Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE)
Part 1 General, Part 2 Pipes, Part 3 Fittings, Part 4 Valves, Part 5 Fitness for purpose of the
system
BS EN 12201:2011
Plastics piping systems for water supply, and for drainage and sewerage under pressure. Polyethylene
(PE) Part 1 General, Part 2 Pipes, Part 3 Fittings, Part 4 Valves, Part 5 Fitness for purpose of
the system
BS EN 12613:2021
Plastics warning devices for underground cables and pipelines with visual characteristics
BS EN 12068:1999
Cathodic protection. External organic coatings for the corrosion protection of buried or immersed
steel pipelines used in conjunction with cathodic protection. Tapes and shrinkable materials
DIN 30672:2000
Tape and shrinkable materials for the corrosion protection of buried or underwater pipelines without
cathodic protection
BS EN 13476
A Plastics piping systems for non-pressure underground drainage and sewerage. Structured-wall piping
systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE)
BSNL Spec. (GR/DWC- 34/01SEP 2007)
BSNL Technical specifications for HDPE duct pipes
Z245.20 SERIES-18. EN 10204 ASME B16.40
Plant-applied external fusion bond epoxy coating for steel pipe Metallic products- Types of
Inspection documents Manually Operated Thermoplastic Gas Shutoffs and Valves in Gas Distribution
Systems
ISO -8085 -3
International Standard for thermoplastic fittings
ISO/TC-138/SC4 N 521 & 523 – 1990
Thermoplastic fitting procurement requirements
IS 14402 : 1996 (Reaffirmed Year : 2022 )
GRP pipes joints and fittings for use sewerage, industrial waste and water (other than potable)
FRP & GRP cable trays
Client specification
IS 12709 : 1994 (Reaffirmed Year : 2014 )
Glass-fibre Reinforced Plastic (grp) Pipes Joints and Fittings for Use for Potable Water Supply
ISO 13628-2:2006
Petroleum and natural gas industries Design and operation of subsea production systems Part 2:
Unbonded flexible pipe systems for subsea and marine applications
API Specification 17J: 2014
Specification for Unbonded Flexible Pipe
ISO 10406:2015
Fibre-reinforced polymer (FRP) reinforcement of concrete Test methods Part 1: FRP bars and
grids Part 2: FRP sheets
ISO 18319:2015
Fibre-reinforced polymer (FRP) reinforcement for concrete structures Specifications of FRP sheets
ASTM F3059-18
Standard Specification for Fiber-Reinforced Polymer (FRP) Gratings Used in Marine Construction and
Shipbuilding
ASTM D3754-19
Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and
Industrial Pressure Pipe
CSA Z245.20 SERIES:22
Plant-applied external coatings for steel pipe
DIN 30670
Polyethylene coatings on steel pipes and fittings - Requirements and testing
IAF Scope 16 Concrete, cement, lime, plaster, etc.
Corrugated and semi-Corrugated Asbestos Cement Sheets
IS 1489 : Part 1 & 2 : 2015 (Reaffirmed Year : 2020 )
Portland Pozzolana Cement
IS 16415 : 2015 (Reaffirmed Year : 2020 )
Composite Cement – Specification
IS 8042 : 2015 (Reaffirmed Year : 2020 )
White Portland Cement - Specification (Third Revision)
IS 1077 : 1992 (Reaffirmed Year : 2021 )
Common Burnt Clay Building Bricks -Specification
IS 16720 : 2018 (Reaffirmed Year : 2023 )
Pulverized Fuel Ash-Cement Bricks- Specification
Customer requirements in the form of QAP, Approved Drawing, GTP etc. and technical specification
which are generally based on National and International Codes and Standards, CEA, MNRE Guidelines
etc.
Standard Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and
Parts for High-Pressure Transmission Service
ASTM A269:2022
Large Diameter Steel Flanges: NPS 26 through NPS 60, Metric/Inch Standard Standard Specification
for Seamless and Welded Austenitic Stainless Steel Tubing for General Service
Standard Specification for Titanium and Titanium Alloy Seamless Pipe
Anodes, Galvanic Anodes)
Magnesium Anodes, Zinc Anodes, Galvanic Anodes)
ASTM B843: 2018
Standard Specification for Magnesium Alloy Anodes for Cathodic Protection
ASTM B418: 2021
Standard Specification for Cast and Wrought Galvanic Zinc Anodes
NACE- SP0387: 2019
Metallurgical and Inspection Requirements for Cast Galvanic Anodes for Offshore Applications
IAF Scope 17b Fabricated metal products
Metal structures
Stage-wise/Final Inspection
ASTM - A515/A515M, 2017
Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and
Higher-Temperature Service
ASTM -A516/A516M, 2017
Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature
Service
NACE MR 0175/ISO 15156 Part 1 and Part 2, 2020
Petroleum and natural gas industries— Materials for use in H2S-containing Environments in oil and
gas production Part 1: General principles for selection of cracking-resistant materials Part 2:
Cracking-resistant carbon and low-alloy steels, and the use of cast irons
Fabrication of tanks, reservoirs, pressure vessels, columns.
Stage-wise/Final Inspection
ASME Sec. VIII, Sec. V, Sec, IX, 2021
ASME Boiler and Pressure Vessel Code
API 620:2021
Design and Construction of Large, Welded, Low-pressure Storage Tanks
API 650:2021
Welded Tanks for Oil Storage
Heat exchanger
Stage-wise/Final Inspection
TEMA standard, 2019
Tubular Exchanger Manufacturers Association – Standard for design & construction of Heat
Exchangers
IS 4503:1967, Reaffirmed 2018
Shell and Tube Type Heat Exchangers
ASME Section VIII, 2021
Rules for Construction of Pressure Vessels
ASME Section V, 2021
Nondestructive Examination
ASME Section IX, 2021
Welding, Brazing, and Fusing Qualifications
Pipes & Tubes
Stage wise/ Final Inspection
API 5L, 46th edition:2018
Specification for Line Pipe or equivalent to this standard with latest edition.
BS EN ISO 3183: 2019
Petroleum and natural gas industries. Steel pipe for pipeline transportation systems
ASTM A333:2018
Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service and Other
Applications with Required Notch Toughness
ASTM A335:2022
Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service
ASTM A53:2022
Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless
ASTM A358:2019
Standard Specification for Electric-Fusion-Welded Austenitic
Chromium-Nickel Stainless Steel Pipe for High-
Temperature Service and General Applications
ASTM A672:2019
Standard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate
Temperatures
ASTM A530:2020
Standard Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe
ASTM A178:2019
Standard Specification for Electric-Resistance-Welded Carbon Steel and Carbon-
Manganese Steel Boiler and Super heater Tubes
ASTM A179:2019
Standard Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes
ASTM A192:2017
Standard Specification for Seamless Carbon Steel
Boiler Tubes for High-Pressure Service
ASTM A209:2022
Standard Specification for Seamless Carbon-Molybdenum Alloy-Steel Boiler and Super heater Tubes
ASTM A213:2022
Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, super heater, and
Heat-Exchanger Tubes
ASTM A214:2019
Standard Specification for Electric-Resistance-Welded Carbon Steel Heat-
Exchanger and Condenser Tubes
ASTM A249:2023
Standard Specification for Welded Austenitic Steel Boiler, Superheater,
Heat-Exchanger, and Condenser Tubes
API 5CT, 10th edition:2018
Specification for Casing and Tubing
IS 1239 : Part 1 : 2004 (Reaffirmed Year : 2019 )
Steel Tubes, Tubulars and Other Wrought Steel Fittings : Part 1 Steel Tubes
ASTM A450: 2021
Standard Specification for General Requirements for Carbon and Low Alloy Steel Tubes
IAF Scope 18 Machine and Equipment
Engines
Stage-wise/Final Inspection
ISO 3046:Part 1: 2020
Reciprocating internal combustion engines -- Performance -- Part 1: Declarations of power, fuel
and lubricating oil consumptions, and test methods -- Additional requirements for engines for
general use
ISO 3046:Part 2: 2002
Reciprocal internal combustion engines --
Performance -- Part 2: Test methods
ISO 3046:Part 3: 2006
Reciprocating internal combustion engines -- Performance -- Part 3: Test measurements
Transmitters for use in industrial process control systems: Part 2 Guidance for installation,
inspection and routine testing
process controlequipment (PLC, DCS, SCADA, CCTV), Gas detection & Fire detection
BS EN 837-2:1998
Pressure gauges - Selection and installation recommendations for pressure gauges
BS EN 837-3:1998
Pressure gauges - Diaphragm and capsule pressure gauges. Dimensions, metrology, requirements and
testing
BS EN 12480:2018
Gas meters. Rotary displacement gas meters
BS EN 16314:2013
Gas meters. Additional functionalities
BS EN 12261:2018
Gas meters. Turbine gas meters
AGA Report 3
Orifice metering of Natural Gas & Other related hydrocarbon fluid
AGA Report 9
Measurement of gas by Multipath Ultrasonic meters
AGA Report 7
Measurement of gas by gas turbine meters
OIML R32
Rotary piston gas meters and turbine gas meters
IS 15672 : 2006 (Reaffirmed Year : 2022 )
Flow measurement of natural gas and fluids by coriolis meters
IS 15674 : 2006 (Reaffirmed Year : 2022 )
Flow measurement of natural gas by ultrasonic meter
IS 15675 : 2006 (Reaffirmed Year : 2022 )
Flow measurement of natural gas and fluid by orifice plate meters
IEC 61511:2023
Functional safety - Safety instrumented systems for the process industry sector
IEC 61131:2023
Programmable controllers
IS 13432 : 1992
Gas Leak Detector for Use with Low Pressure Liquefied Petroleum Gas Burning Appliances
IS 2189 : 2008 (Reaffirmed Year : 2018 )
Selection, Installation and Maintenance of Automatic Fire Detection and Alarm System Code of
Practice
IS 15908 : 2021
Selection installation and maintenance of control and indicating equipments for fire detection and
alarm system - Code of Practice
IEC 62828-1:2017
Reference conditions and procedures for testing industrial and process measurement transmitters -
Part 1: General procedures for all types of transmitters
IEC 62828-2:2017
Reference conditions and procedures for testing industrial and process measurement transmitters -
Part 2: Specific procedures for pressure transmitters
IEC 62828-3:2018
Reference conditions and procedures for testing industrial and process
measurement transmitters - Part 3: Specific procedures for temperature transmitters
IEC 62828-4:2020
Reference conditions and procedures for testing industrial and process measurement transmitters -
Part 4: Specific procedures for level transmitters
IEC 62828-5:2020
Reference conditions and procedures for testing industrial and process
measurement transmitters - Part 5: Specific procedures for flow transmitter
NFPA 72, Current edition:2022
NFPA 72 covers the application, installation, location, performance, inspection, testing, and
maintenance of fire alarm systems, supervising station alarm systems, public emergency alarm
reporting
systems, fire and carbon monoxide detection and warning equipment, and emergency communications
systems (ECS), and their components
DG Set
Stage-wise/Final Inspection
ISO 3046:Part 1:2020
Reciprocating internal combustion engines Declarations of power, fuel and lubricating oil
consumptions, and test methods -- Additional
requirements for engines for general use
ISO 3046:Part 3:2006
Test measurements
ISO 3046:Part 4:2009
Speed governing
ISO 3046:Part 5:2020
Torsional vibrations
IS/ISO 8528, Part 1, 2&5, 2018, Part 3, 4, 6: 2005, Reaffirmed 2019 Part 7 & 9,
Reciprocating Internal Combustion Engine Driven Alternating Current Generating Sets
2017 Part 8, 2016 Part 10:1998 reaffirmed 2019
Part 12:1997 reaffirmed 2019
Transformer
Stage-wise/Final Inspection
IS 13364:Part 1 & 2, 1992, Reaffirmed 2018
AC Generators Driven by Reciprocating Internal Combustion Engine Part 1 Rated Up To 20 Kva
and Part 2 Rated Above 20 Kva and upto 1250 Kva
IS 2026:Part 1: 2011, Reaffirmed 2016
Power Transformer General
IS 2026:Part 2: 2010, Reaffirmed 2020
Temperature-rise
IS 2026:Part 3:2018
Insulation Levels, Dielectric Tests and External Clearances in Air
IS 2026:Part 4: 1977, Reaffirmed 2016
Terminal marking, tapping’s and connections
IS 2026:Part 5:2011, Reaffirmed 2016
Ability to Withstand Short Circuit
IS 2026:Part 6:2017
Reactors
IS 2026:Part 7: 2009 Reaffirmed 2019
Loading Guide for Oil-Immersed Power Transformers
IS 2026:Part 8, 2009 Reaffirmed 2019
Applications guide
IS 2026:Part 10:2009 Reaffirmed 2019
Determination of sound levels
IS 2026:Part 11:2021
Dry-Type Transformer
IS 2026:Part12: 2018
Loading Guide for Dry-type Power Transformers
IS 2026:Part 14: 2018
Liquid-Immersed Power Transformers Using High-Temperature Insulation Materials
IS 2026:Part 15:2018
Gas-Filled Power Transformers
IS 2026:Part 16:2018
Transformers for Wind Turbine Applications
IS 2026:Part 18:2018
Measurement of Frequency Response
IS 335:2018
New Insulating Oils — Specification (Fifth Revision)
IS 11171:1985 Reaffirmed 2016
Dry-Type Power Transformers
IS 1180 : Part 1 : 2014 (Reaffirmed Year : 2019
Outdoor Type Oil Immersed Distribution Transformers Upto and Including 2 500 kVA, 33kV -
Specification
Part 1 Mineral Oil Immersed (Fourth Revision)
IS 1180 : Part 3 : 2021
Outdoor/Indoor Type Liquid Immersed Distribution Transformers Up to and Including 2 500 kVA, 33 kV -
Specification Part 3 Natural/Synthetic Organic Ester Liquid Immersed
IEC 60076: 2011
Power transformers
IS 12021 : 2015
Control Transformers for Switchgear and Controlgear for Voltages Not Exceeding1 000 V ac
IS 2705 : 1992 (Reaffirmed Year : 2017 )
Current transformers
IS 16227 (Part 1) : 2016 IEC 61869-1:2007 (Active)
Instrument transformers: Part 1 general requirements
IS 16227 (Part 2) : 2016 IEC 61869-2:2012
Instrument transformers: Part 2 additional requirements for current transformers
Reviewed In : 2021
Wires and cable
Stage-wise/Final Inspection
IS 694:2010, Reaffirmed 2020
Polyvinyl Chloride Insulated Unsheathed--And Sheathed Cables/ cords With Rigid And--Flexible
Conductor For Rated Voltages--Up To And Including 1100 V
IS 1554:Part 1, Part 2, 1988, Reaffirmed 2020
PVC insulated (heavy duty) electric cables
IS 5831:1984, Reaffirmed 2016
PVC insulation and sheath of electric cables
IS 7098:Part 1:1988, Reaffirmed 2020
Crosslinked polyethylene insulated PVC sheathed cables For working voltage upto and including 1 100
V
IS 7098:Part 2:2011, Reaffirmed 2016
for Working Voltages from 3.3 kV up to and Including 33 kV
IS 7098:Part 3:1993, Reaffirmed 2019
For working voltages from 66 kV upto and including 220 kV
IS 8130:2013 Reaffirmed 2018
Conductors for Insulated Electric Cables and Flexible Cords
Electrical switching circuits / boards Distribution Control panels
Stage-wise/Final Inspection
IS 8623:Part 2:1993
Low-voltage Switchgear and Controlgear Assemblies
IS 13703:Part 2: Sec1:1993, Reaffirmed 2019
Low-voltage fuses for voltages not exceeding 1000 V AC or 1500 V DC
IS/IEC 60255:Part 1:2009 (Reaffirmed Year : 2020 )
Measuring Relays and Protection Equipment
IS 12021:2015
Control Transformers for Switchgear and Controlgear for Voltages Not Exceeding 1000 V a.c. -
Specification
IS 9124:1979, Reaffirmed 2016
Guide for maintenance and field testing of electrical relays
IS 8686:1977 Reaffirmed 2016
Static protective relays
Lead acid accumulators
Stage-wise/Final Inspection
IS 7372:1995 Reaffirmed 2017
Lead-acid storage batteries for motor vehicles
IS 1651:2013 Reaffirmed 2018
Stationary cells and batteries, lead-acid type (with tubular positive plates)
IS 1652: 2013 Reaffirmed 2019
Stationary Cells and Batteries,Lead-Acid Type with Plante Positive Plates
IS 6304:1992, Reaffirmed 2017
Stationary batteries lead-acid type with pasted positive plates
IS 8320:2000, Reaffirmed 2020
General Requirements and Methods of Tests for Lead-acid Storage Batteries
IS 15549: 2005, Reaffirmed 2020
Stationary Regulated Lead Acid Batteries
IEC 60896: 2004
Stationary lead-acid batteries
Capacitors, Reactors
Stage-wise/Final Inspection
IS 13925:Part 1:2012, Reaffirmed 2017
Shunt Capacitors For Ac Power Systems Having A Rated Voltage Above 1000 V-General
IS 13925:Part 2:2002, Reaffirmed 2017
Endurance Testing
IS 13925:Part 3:2002, Reaffirmed 2017
Protection of Shunt Capacitors and Shunt Capacitor Banks
IS 13925:Part 4, 2013, Reaffirmed 2018
Internal Fuses
IS 2026: Part 6:2017
Reactors
IAF Scope 26
Gas Supply -NGPL with item 26A(iii) of NABCB Sub-sector categorization document BCB 503(O&G)
Stagewise /In-service
PNGRB's GSR 808(E) dated 11.11.2009 along with latest amendments, national/
PNGRB's "Technical Standards and Specifications including Safety Standards for Natural Gas
Pipelines" Regulations, 2009
international standards
mentioned therein and relevant statutes
Gas Supply -CGD With item 26B(iii) of NABCB Sub-sector categorization document BCB 503(O&G)
Stagewise /In-service
PNGRB's GSR 612(E) dated 27.08.2008 along with latest amendments, national/ international
standards mentioned
PNGRB's "Technical Standards and Specifications including Safety Standards for City or
Local Natural Gas Distribution Network" Regulations, 2008
therein and relevant statutes
Gas Supply -NGPL with item 26-C (i) of NABCB Sub-sector categorization document BCB 503(O&G)
In-service
PNGRB's Notification No. Infra/NGPL/1/2010 dated 05.11.2012 along with national/ international
standards
PNGRB's "Integrity Management System for Natural Gas pipelines" Regulations 2012
mentioned therein and relevant statutes
Gas Supply -CGD with item 26-C (ii) of NABCB Sub-sector categorization document BCB 503(O&G)
In-service
PNGRB's Infra/IMP/CGD/1/2013 dated 16.05.2013 along with national/ international standards
mentioned therein and relevant statutes
PNGRB's "Integrity Management System for City or Local Natural Gas Distribution
Network" Regulations, 2013
IAF Scope 27
Water supply: water Services- Collection, Purification & Distribution of water
Steam and hot water supply Collection, Purification and Distribution of water
In-service, Process/Stage-wise, Final inspection
Central Public Health and Environmental Engineering Organization. (CPHEEO)
Manual on Water Supply & Treatment
IS 1172:2016
Code of Basic Requirements for Water Supply, Drainage and Sanitation
SP 35 (S&T): 2014
Handbook on water supply and drainage
IS 456:2016
Plain & Reinforced Concrete
IS 2065 :1983
Code of Practice for Water supply and treatment
(RA 2022)
IS : 816:1969
Code of practice for use of Metal Arc Welding for General Construction in mild steel.
ASME-Sec IX:2019
Welding Procedure and Performance qualification
IS 783:1985
Code of Practice for Laying of Concrete Pipes
IS 3114:1994
Code of Practice for Laying of Cast Iron Pipes
IS 10221 : 2008
Coating and wrapping of underground mild steel pipeline - code of practice.
IS 7634:1: 2002
Plastics Pipes Selection, Handling, Storage and Installation for Potable Water Supplies - Code of
Practice
IS 7634 :2: 2012
Part 2: Laying and jointing of polyethylene (PE) pipes
IS 7634 :3: 2018
Part 3 : Laying and Jointing of UPVC Pipes Customer Requirements in the form of Project
Specification, Datasheet, Drawings and QAP as per the applicable National & International Codes
and Standards as mentioned above or equivalent to the standards described above.
IAF Scope 28 Construction
Building Constructions & associated works, Bridges, Roads & Highways, pre-stressed
concrete structures, site preparation, completion and installation, Concrete Roads, Bitumen
Road, Building Structure & Transmission tower Foundations
In-service, Process/Stage-wise, Final inspection
IS 3764:1992 (R2022) IS 1498:1970 (R2021) IS 10379:1982 (R2020) MORTH Latest
Revision IRC 95
Code of safety for excavation work Classification and identification of soils for general
engineering purposes Code of practice for field control of moisture and compaction of soils for
embankment and subgrade Specification for road and Bridge work Guidelines on use of modified
bitumen in Road construction and other Relevant IRC Specifications (Standard Specifications and
Code of Practice for Road Bridges)
IS 456:2010
Plain and Reinforced Concrete –Code of Practice
IS 3935:2008
Code of Practice for Composite construction
IS 10262:2009
Guidelines for concrete mix design proportioning
IS:1786/2008(Reaffirmed 2009) with amendment no:1 2012
High Strength deformed steel bars and wires for concrete reinforcement
IS 383:2016
Specification of Coarse and Fine aggregate for concrete
IS 1343:2012
Prestressed concrete code of Practice
NBC 2016
National Building code of India
IS 1199:1959 (2018)
Methods of Sampling & analysis of concrete
IS 2911 (part I to IV)
Pile foundation
IS 12183:1987 Reaffirmed:2014
Code of practice for plumbing in multi- storeyed building
IS 2189:2008 Reaffirmed:2013
Selection, Installation and Maintenance of Automatic Fire-Detection and Alarm System - Code of
Practice
IS 2212:1991 Reaffirmed:2014 IS 2572:2005 Reaffirmed:2015
Code of practice for brickworks Construction of hollow and solid concrete block masonry
IS 1905:1987 Reaffirmed:2017
Code of Practice for Structural use of Unreinforced Masonry
Customer Requirements in the form of Project Specification, Datasheet, Drawings and QAP as per the
applicable National & International Codes and Standards as mentioned above or equivalent to
the standards described above.
IAF Scope 34
Emergency Response & Disaster Management Plan (ERDMP) with item 34(ii) of NABCB Sub-sector
categorization document BCB 503(O&G): Entire downstream areas as applicable under item-3 of
ERDMP Regulation
In-Service
GSR 39 (E), year 2010 with amendment 2020 along with national/ international standards mentioned
therein and relevant statutes
PNGRB's Codes of Practices for Emergency Response and Disaster Management Plan (ERDMP)
Regulations -2010
The
following
offices
of
Certification
Engineers
International
Ltd.
is/are
included
under
accreditation
S.No
Location
Address
Key
activities
performed
01
Head
office
Certification
Engineers
International
Ltd.
D-
101
–106,
Ist
Floor,
ITC,
CBD
Belapur
Station
Complex,
Navi
Mumbai
400614
Top
management
functions,
quality
management
functions,
administration
&
accounts.
Key
activities
as
applicable
to
head
office.
Marketing,
contract
review,
planning
for
inspection
&
nomination
of
inspection
personnel,
conduct
of
inspection,
issuance
of
inspection
report
and
inspection
certificate.
