IS 1363: Part 1: 2023
IS 1363: Part 2: 2018
IS 1363: Part 3: 2018
IS 1364: Part 1: 2023
IS 1364: Part 2: 2023
IS 1364: Part 3: 2018
IS 1367: Part 1: 2014
IS 1367: Part 2: 2002
IS 1367: Part 3: 2017
IS 1367: Part 5: 2018
IS 1367: Part 6: 2025
IS 1367: Part 7: 1980
IS 1367: Part 8: 2020
IS 1367: Part 9: [Sec 1 & Sec 2]: 1993
IS 1367: Part 10: 2002
IS 1367: Part 11: 2024
IS 1367: Part 12: 1981 (Reaffirmed 2018)
IS 1367: Part 13: 2020
Standard Specification for Steel, Stainless-Steel, Alloy-Steel and Stainless-Steel Fasteners
IS 1367: Part 14: [Sec 1 & Sec 2: 2023]
[Sec 3: 2018], [Sec 4: 2023]
IS 1367: Part 16: 2002 (Reaffirmed 2023)
IS 1367: Part 17: 2023
IS 1367: Part 18: 1996 (Reaffirmed 2021)
IS 1367: Part 19: 1997
IS 1367: Part 20: 1996 (Reaffirmed 2021)
Module Mounting Structures / Transmission Line Structures
Stagewise / Final Inspection
IS 2062: 2011
IS 15961: 2012
Hot Rolled Medium and High Tensile Structural Steel
Hot Dip Aluminium – Zinc Alloy Metallic Coated Steel, Strip and Sheet (Plain)
IAF Scope 19
Electrical and Optical Equipment
Power Transformer
Stagewise / Final Inspection
IS 2026 (Part-1):2011
IS 2026 (Part 2): 2010 Reaffirmed 2015
IS 2026 (Part 3): 2018
IS 2026 (Part 4):1977 Reaffirmed 2021
Part1: General
Part 2: Temperature Rise
Part 3: Insulation levels, dielectric tests, and external clearances in air
Part 4: Terminal markings, tapings and connections
IS 2026 (Part 5): 2011 Reaffirmed 2016
IEC 60076-4:2002
IEC 60186:1987/AMD2:1995
IS 1180: Part 1: 2014
IS 11171 Rev1: 1985, Reaffirmed 2016
IEC 60076-4:2002
Part 5: Ability to withstand short circuit
Part 4: Guide to the lightning impulse and switching impulse testing – Power transformers
Voltage Transformers
Outdoor Type Oil Immersed Distribution Transformers Upto and Including 2 500 kVA, 33kV – Specification Part 1 Mineral Oil Immersed (Fourth Revision)
Specification for Dry Type Power Transformers
Part 4: Guide to the lightning impulse and switching impulse testing – Power transformers
Instrument Transformer
Stagewise / Final Inspection
IS:2705 (Part 1) :1992 Reaffirmed 2002
IS : 2705 (part 2) : 1992 Reaffirmed 2002
IS : 2705 (part 3) : 1992 Reaffirmed 2002
Current Transformers -Specification Part 1: General Requirements
Current Transformers -Specification Part 2: Measuring Current Transformers
Current Transformers -Specification Part 3: Protective Current Transformers
Current Transformers -Specification Part 4: Protective Current Transformers for special purpose applications
IEC: 61869-2:2012
IEC: 61869-3:2021
Instrument transformers – Part 2: Additional requirements for current transformers
Instrument transformers – Part 3: Additional requirements for inductive voltage transformers.
AC Generators
&
Stagewise / Final Inspection
IS 13364: Part 1: 1992 (Reaffirmed Year: 2018)
IS 13364: Part 2: 1992 (Reaffirmed Year: 2018)
IEC 60034-1:2022
ISO 8528-1:2018
IEC 61020-1:1991
AC Generators Driven by Reciprocating Internal Combustion Engine:
Part 1 Rated Up To 20 KVA
AC Generators Driven by Reciprocating Internal Combustion Engine
Part 2 Rated Above 20 KVA and upto 1250 KVA
Rotating Electrical Machines
Part 1: Rating and Performance
Push-button switches – Part 1: General requirements and measuring methods
Wires and Cable
Stagewise / Final Inspection
IS 694 Rev4:2010, Reaffirmed 2015
IS 1554, Part1 (Rev3), Part2 (rev2): 1988, Reaffirmed 2015
Polyvinyl Chloride Insulated Unsheathed–And Sheathed Cables/ cords With Rigid And–Flexible Conductor for Rated Voltages–Up To and Including 1100 V
PVC insulated (heavy duty) electric cables
IS 5831Rev1:1984, Reaffirmed 2016
IS 7098 (Part 1) Reaffirmed 2020
PVC insulation and sheath of electric cables
Crosslinked polyethylene insulated PVC sheathed cables For working voltage upto and including 1 100 V
for Working Voltages from 3.3 kV up to and Including 33 kV
For working voltages from 66 kV upto and including 220 kV
ACSR Conductors
Stagewise / Final Inspection
IS 8130 Rev2:2013
IS 10810:1984, Reaffirmed 2016
IS 13573 Rev1: 2011, Reaffirmed 2016 and ENA09-13 Issue2:2013
IS: 398 Part 1:1996 Reaffirmed 2001
Conductors for Insulated Electric Cables and Flexible Cords
Methods of test for cables
Cable jointing kits & Accessories for Extruded Power Cables
ACSR Conductors for overhead transmission purposes Part 1: Aluminum stranded conductors
IS: 398 Part 2:1996 Reaffirmed 2002
IS: 398 Part 3:1976 (R1991)
IS: 398 Part 4:1994 (R2014)
Part 2: Aluminum conductors galvanized steel rein-forced
Part 3: Aluminum conductors, aluminized steel reinforced
Part 4: Aluminum alloy stranded conductors (Aluminum magnesium silicon type)
IS: 398 Part 5:1992 (R2002)
IEC 60888:2019
IEC 61089:1997
Part 5: Aluminum conductors – galvanized steel reinforced for extra high voltage (400 kV and above)
Zinc-coated steel wires for stranded conductors
Amendment 1 – Round wire concentric lay overhead electrical stranded conductors.
OR any equivalent standards
HV Switchgear and Control Gear
Stagewise / Final Inspection
IS 12729:2004
IEC 62271-1:2017 AMD 2021
Common Specification for High Voltage Switchgear and control gear standards
Common Specification for High Voltage Switchgear and control gear standards
LV switchgear and control gear
Stagewise / Final Inspection
IS 13947 (Part1): 2004
IEC 60947-1: -2020
Specification For Low-Voltage Switchgear and Control gear – Part 1: General Rules
Specification For Low-Voltage Switchgear and Control gear – Part 1: General Rules OR any equivalent standards
Electrical switching circuits / boards Distribution Control panels
Stagewise / Final Inspection
IS 8623:1993, Reaffirmed 2018
IS 13703:1993, Reaffirmed 2014
Low-Voltage Switchgear and Control gear assemblies
Low-voltage fuses for voltages not exceeding 1 000 V AC or 1 500 V DC
IS 12021 Rev1: 2015
IS 9124:1979, Reaffirmed 2016
IEC 60255-27:2023
Control Transformers for Switchgear and Control gear for Voltages Not Exceeding 1000 V A.C. – Specification
Guide for maintenance and field testing of electrical relays
Measuring relays and protection equipment – Part 27: Product safety requirements
IS 7372 Rev1:1995, Reaffirmed 2017
IS 1651Rev4:2013
IS 1652 Rev4:2013
IS 6304 Rev2:1992, Reaffirmed 2017
IS 8320 Rev2:2000, Reaffirmed 2015
Lead-acid storage batteries for motor vehicles
Stationary cells and batteries, lead-acid type (with tubular positive plates)
Stationary Cells and Batteries, Lead-Acid Type with Plante Positive Plates
Stationary batteries lead-acid type with pasted positive plates
General Requirements and Methods of Tests for Lead-acid Storage Batteries
Switches
Stagewise / Final Inspection
IS 9920:1985 Reaffirmed 2002
IS 8320Rev2:2000, Reaffirmed 2015
Batteries
Stagewise / Final Inspection
BIS IS 10918:1984 AMD 2 2013
IS 15549:2005 Reaffirmed 2015
Specification for vented type nickel cadmium batteries
Stationary Valve Regulated Lead Acid Batteries
IEC:60896-22-Edition 2004
Stationary lead-acid batteries
Insulators
Stagewise / Final Inspection
IS 1445:1992 Reaffirmed 2018
Specification for porcelain insulators for overhead power lines with a nominal voltage upto and including 1000V
Photovoltaic Inverters
Energy Meters
UPS
Circuit Breakers
Scada System
Disconnector/Isolator
LA/ Earthing System
Stagewise / Final Inspection
Stagewise / Final Inspection
Stagewise / Final Inspection
Stagewise / Final Inspection
Stagewise / Final Inspection
Stagewise / Final Inspection
Stagewise / Final Inspection
IS 16169:2014, IEC 62116:2014
IS 12346:1999, IEC 60736
IS 16242 (part 1) 2014
IS:9135-1979
IS 15953: 2011
IS 9921 (Part-4) -1985
IS 3043: 1987
Utility Photovoltaic inverters – Test procedure of islanding prevention measures
Testing Equipment for AC electrical energy meters
General and Safety Requirements for UPS
Guide for testing of circuit breakers with respect of out of phase switching
Supervisory Control And Data Acquisition(Scada) System for Power System applications
Specification for Alternating current disconnectors (Isolators) and earthing switches for voltage above 1000 V.
Code of practice for Earthing
Control Relay Panel
Stagewise / Final Inspection
IS 12083: 1986 (Part-2)
Specification for Electrical relays
Solar PV Module (Range 30 Wp to 800 Wp)
Solar PV Module (Range 30 Wp to 800 Wp)
Solar PV Module (Range 30 Wp to 800 Wp)
Stagewise / Final Inspection
Stagewise / Final Inspection
Stagewise / Final Inspection
Terrestrial photovoltaic (PV) modules – Design qualification and type approval – Part 1: Test requirements
Photovoltaic (PV) module safety qualification Part 1: Requirements for construction Part 2: Requirements for testing
Terrestrial photovoltaic (PV) modules – Design qualification and type approval Part 1: Test requirements Part 1-1: Special requirements for testing of crystalline silicon photovoltaic (PV) modules Part 1-2: Special requirements for testing of thin-film Cadmium Telluride (CdTe) based photovoltaic (PV) modules Part 1-3: Special requirements for testing of thin-film amorphous silicon based photovoltaic (PV) modules Part 1-4: Special requirements for testing of thin-film Cu(In,GA)(S,Se)2 based photovoltaic (PV) modules
The
The following offices of Sunkonnect Advisory Services Private Limited are included under accreditation
Location
Address
Key
activities
performed
Gurugram
(Main Office)
301-304, JMD Empire,
Sector 62, Gurugram – 122102,
Haryana, India
Top Management functions, Quality Management System functions, administration & accounts, other key activities.
