SASO SALEEM Scheme (Type 3 assessment as per ISO 17067:2013)
SASO GSO 1785-2013 SASO 1530-2003
Lubricating oils for air compressors and vacuum pumps
SASO 1729 (SASO GSO 1181)- 2020
classification and specifications of automotive greases
GSO 1164-2002
Mineral Lubricating Oils Used In Steam Or Gas Turbines
GSO 1210-2010
Fluids for electro-technical applications - unused mineral oils for transformers and switchgear
SASO GSO IEC 60296-2015
Road vehicles - Specification of non-petroleum-based brake fluids for hydraulic systems
GSO ISO 4925-2009
Lubricating oils for cooling compressors
SASO 1775-2017
Automatic movement transfer liquid
SASO GSO 1180-2010
Lubricating oils for two - Stroke engines
SASO 1869-2017
lubricants, industrial oils and related products (class L) - Machine-tool lubricants - Categories and specifications
SASO-ISO-19378-2007
Lubricants, industrial oils and related products (class L) - Family H (hydraulic systems) - Specifications for hydraulic fluids in categories HFAE,
HFAS, HFB, HFC, HFDR and HFDU
ISO 12922:2020-2020
HLP HYDRAULIC OILS
GSO 1161-2021
HVLP HYDRAULIC OILS
GSO 1162-2021
HVLP HYDRAULIC OILS
GSO 1162-2021
Standard Specifications For Performance Of Engine Oils
GSO ASTM D4485:2010-2010
Classification of industrial lubricants for hydraulic systems (HI)
GSO 1108:2002-2002
14
Rubber and plastic products
Construction and Building MaterialThermal insulation products for buildings - factory made mineral wool (mw) products - specification
SASO SALEEM Scheme (Type 3 assessment as per ISO 17067:2013)
SASO EN 13162-2013
Thermal insulation products for buildings - Factory made rigid polyurethane foam (PU) products - Specification
SASO EN 13165-2015
Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
ASTM C578-2019
Rigid cellular plastics - Spray-applied polyurethane foam for thermal insulation - Part 1: Material specifications
ISO 8873-1-2006
Rigid polyisocyanurate (PIR) and polyurethane (PUR) products for building end-use applications - Part 1: Specification for laminated insulation
SASO GSO BS 4841-1-2014
boards with auto-adhesively or separately bonded facings
Rigid polyisocyanurate (PIR) and polyurethane (PUR) products for building end-use applications - Part 2: Specification for laminated boards
SASO GSO BS 4841-2-2010
Rigid polyisocyanurate (PIR) and polyurethane (PUR) products for building end-use applications - Part 3:
SASO GSO BS 4841-3-2010
Specification for laminated boards
(Roof boards) with auto-adhesively or separately bonded facings for use as roof board thermal insulation under built up bituminous roofing membranes
Rigid polyurethane (PUR) and polyisocyanurate (PIR) products for building end-use applications - Part 4: Specification for laminated insulation
SASO GSO BS 4841-4-2010
boards (roof boards) with auto-adhesively or separately
bonded facings for use as roof board thermal insulation under non-bituminous single- ply roofing membranes
Rigid polyisocyanurate (PIR) and polyurethane (PUR) products for building end-use applications- Part 5: Specification for laminated boards
(roofboards) with auto-adhesively or separately bonded facings for use as thermal insulation boards for pitched roofs
SASO GSO BS 4841-5-2010
Rigid polyisocyanurate (PIR) and polyurethane (PUR) products for building end-use applications - Part 6: Specification for laminated boards
with auto-adhesively or separately bonded facings for use as thermal insulation for floors
SASO GSO BS 4841-6-2010
Flexible sheets for waterproofing. Reinforced bitumen sheets for roof
GSO EN 13707-2015
waterproofing. Definitions and characteristics
Standard Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation
ASTM C1126-2019
Flexible sheets for waterproofing - Plastic and rubber damp proof courses - Definitions and characteristics
SASO GSO EN 14909-2011
High-pressure decorative laminates - Sheets made from thermosetting resins - Part 1: Classification and specifications
ISO 4586-1-2018
Sanitary appliances - Crosslinked cast acrylic sheets for baths and shower trays for domestic purposes
SASO-EN-263-2008
Sanitary appliances - Baths made from impact modified coextruded ABS/acrylic sheets - Requirements and test methods
SASO-EN-15719-2015
Artificial Stone
SASO GSO 2340-2014
specifications for impact modified extruded acrylic sheets for shower trays for domestic purposes
SASO-EN-13558-2003
sanitary appliances - baths made from cross-linked cast acrylic sheets - requirements and test methods
SASO-EN-198--2008
Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 2: Pipes
ISO 4427-2-2019
Piping systems for pressure and non-pressure water supply - Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated
ISO 10639-2017
Plastic pipes systems for cold and hot water extensions - Crosslinked polyethylene (PE-X) - part 2: pipes
ISO 15875-2-2003
Plastics pipes and fittings - Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels - Metric series
ISO 14531-1-2002
Plastic pipes systems for hot and cold-water extensions - Polybutylene - part 2: pipes
ISO 15876-2-2017
Plastic pipes systems for renovating groundwater
ISO 11298-3-2018
networks - part 3: closely aligned lining of pipes
Plastic pipes systems for gas fuel supply - Polyethylene (PE) - part 2: pipes
ISO 4437-2-2014
Plastic pipes systems for cold and hot water supply - polypropylene - part 2: pipes
ISO 15874-2-2013
Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 3: Fittings
ISO 4427-3-2019
Plastic pipes systems for hot and cold-water supplies -
ISO 15877-2-2009
Chlorinated polyvinyl chloride - part 2: pipes
Plastic pipes systems for unpressurized drainage and sewage - Polyester resin concrete (PRC) - part 1: pipes and parts with flexible connections
ISO 18672-1-2009
Plastic pipes systems for hot and cold water for buildings - PE - RT - increasing resistance temperature - part 2: pipes
ISO 22391-2-2009
Plastic pipes systems - multilayer metal pipes - method
SASO ISO TR 18124-2006
of testing welding line strength in metal layer and interconnection between layers
using the cone
Plastic pipes and fittings - reinforced thermoplastic pipes systems to provide gas fuel to pressures up to - mp (40 bar)
General Requirements for the materials intended to come into contact with food.
SASO GSO 2231:2012-2012
standard specifications for low density polyethylene film intended for use in food packing applications
SASO 2845:2012-2012
Food packages - Part 2: Plastic package - General Requirements.
GSO 1863-2011
Melamine Plastics tableware
SASO 829:1994-1994
Materials and articles in contact with foodstuffs - Insulated containers for domestic use- Part 2: Specification for insulated bags and boxes.
SASO GSO EN 12546-2-2014
plastic materials and articles intended to come into contact with food
EU Reg. no. 10/2011-2011
Disposable plastic tableware
SASO 2888-2021
Polypropylene or polyethylene food containers for multiple uses
SASO 2939-2020
Plastic containers used for bottling and preserving water (plastic bottles)
SASO 2940-2020
Disposable travel table made of polyethylene
SASO 2887-2017
15 Non-metallic mineral products
Construction and Building MaterialsGypsum board thermal/acoustic insulation composite panels - Definitions, requirements and test methods
SASO SALEEM Scheme (Type 3 assessment as per ISO 17067:2013)
SASO GSO EN 13950-2011
Preformed plasterboard cornices - Definitions, requirements and test methods
SASO GSO EN 14209-2011
Gypsum board thermal/acoustic insulation composite panels - Definitions, requirements and test methods
SASO GSO EN 13950-2011
Gypsum elements for suspended ceilings - Definitions, requirements and test methods
SASO GSO EN 14246-2011
Glass in buildings - Basic glass products from silicate lime soda - Part 1: Definitions and general physical and mechanical properties
ISO 16293-1-2008
Glass in buildings - Laminated glass and laminated safety glass - Part 2: Laminated safety glass
ISO 12543-2-2008
Terrazzo tiles - Part 1: Terrazzo tiles for internal use
GSO EN 13748-1-2008
Terrazzo tiles - Part 2: Terrazzo tiles for external use
GSO EN 13748-2-2008
Gypsum blocks
SASO-2217-2004
Natural marble tiles
GSO775-1997
Pitched roofs clay tiles and fittings
SASO 1812-2001
Standard Specification for Roofing Slate/ Standard
ASTM C406 /ASTM C34-2015
Specification for Structural Clay Loadbearing Wall Tile
Standard Specification for Structural Clay Nonloadbearing Screen Tile
ASTM C530-2017
Standard Specification for Structural Clay Facing Tile
ASTM C212-2021
Standard Specification for Structural Clay Nonloadbearing Tile
ASTM C56-2013
Ceramic sanitary appliances: Eastern water closets and traps
SASO-1258-2017
Ceramic sanitary appliances - General requirements
SASO-1025-1998
Ceramic sanitary appliances - bidets
SASO-GSO-EN-14528-2011
Pedestal and wall-hung bidets with over-rim supply. Connecting dimension
SASO-GSO- EN-35-2007
Sanitary appliances flushing apparatus
SASO-1480-2018
Sanitary appliances-Tapware: Shower and spray hoses
SASO-1913-2001
Sanitary appliances - Specification for whirlpool baths
SASO-GSO-12764-2011
Sanitary appliances - flushing water tanks
SASO-1257-2017
sanitary appliances pressurized flushing devices
SASO-1477-2002
Sanitary appliances: general requirements for plumbing fixture fittings
SASO-2655-2019
Baths - Connecting dimensions
SASO-EN-232-2012
ceramic sanitary appliances - western water closets
SASO-1473-2016
sanitary appliances - shower trays made from crosslinked cast acrylic sheets - requirements and test methods
SASO-GSO-249-2015
Wash basins. Connecting dimensions
BS EN 31:2011+A1:2014-2014
Standard Specification for Clay Drain Tile and Perforated Clay Drain Tile
ASTM C4-2018
Standard Specification for Ceramic Glazed Structural Clay Facing Tile, Facing Brick, and Solid Masonry Units
ASTM C126-2019
Stone and Natural Marble
ASTM C615-2018
Artificial Stone
SASO GSO 2340-2014
Standard Specification for Serpentine Dimension Stone
ASTM C1526-2019
Standard Specification for Travertine Dimension Stone
ASTM C1527-2018
Standard Specification for Architectural Cast Stone
ASTM C1364-2019
Standard Specification for Marble Dimension Stone
ASTM C503-2015
Standard Specification for Slate Dimension Stone
ASTM C629-2015
Standard Specification for Limestone Dimension Stone
ASTM C568-2015
western water closets equipped with a dual flushing device
SASO 2922-2019
Sanitary appliances - Wash basins - Functional requirements and test methods
SASO-GSO-EN 14688-2011
standard specification for brick, insulating, high temperature, fire clay
ASTM F1312-2019
Materials, Articles and Surfaces in Contact with FoodVitreous and porcelain enamels - Release of lead and cadmium from enamelled ware in contact with food - Part 2: Permissible limits
SASO SALEEM Scheme (Type 3 assessment as per ISO 17067:2013)
ISO 4531-2:2012-2011
Ceramic cookware in contact with food - Release of lead and cadmium - Part 2: Permissible limits
GSO ISO 8391-2-v
Ceramic ware, glass-ceramic ware and glass dinnerware in contact with food - Release of
GSO ISO 6486-2-2013
lead and cadmium - Part 2 Permissible limits.
Glass Food Serving Utensils Dedicated for Eating - Lead and Cadmium Release - Part 2: Permitted Limits
GSO ISO 7086-2-2013
Porcelain tableware
SASO 2933-2019
Porcelain tableware (Chinese)
GSO 2179-2011
Cooking tools made of thermal glass
SGSO 2075-2011
16 Concrete, cement, lime, plaster etc
Construction and Building MaterialsStandard Specification for Solid Concrete Interlocking Paving Units
SASO SALEEM Scheme (Type 3 assessment as per ISO 17067:2013
ASTM C936M-2021
Non loadbearing lightweight thermal insulation concrete masonry units of foamed concrete, lightweight aggregates or sandwich insulation layer
SASO 2875-2016
Standard Specification for Gypsum Form board
ASTM C318-2018
Standard Specification for Fiber Reinforced Gypsum Panel
ASTM C1278-2017
Standard Specification for Coated Glass Mat Water Resistant Gypsum Backing Panel
ASTM C1178-2013
Standard Specification for Gypsum Keene's Cement
ASTM C61-2020
Standard Specification for Gypsum
ASTM C22-2021
Standard Specification for Gypsum Board
ASTM C1396-2017
Standard Specification for Quicklime, Hydrated Lime, and
ASTM C1529-2019
Limestone for Environmental Uses
17 Basic metals and fabricated metal products
Construction and Building MaterialsStandard Specification for Carbon Structural Steel
SASO SALEEM Scheme (Type 3 assessment as per ISO 17067:2013
ASTM A36-2019
Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling
ASTM A6-2019
Standard Specification for High-Strength Low-Alloy Structural Steel
ASTM A242-2013
Standard Specification for Epoxy-Coated Steel Wire and Welded Wire Reinforcement
ASTM A884/A884M-2019
Wrought aluminium and aluminium alloys -Cold-drawn rods/bars, tubes and wires - Part 2: Mechanical properties
ISO 6363-2-2014
Standard Specification for Carbon-Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete
ASTM A 1064/A 1064M-2018
Self-supporting metal sheet for roofing, external cladding and internal lining - Product specification and requirements
SASO GSO EN 14782-2011
Fully supported metal sheet and strip for roofing, external cladding and internal lining - Product specification and requirements
SASO GSO EN 14783-2011
Ductile iron pipes, fittings, accessories and their joints - External zinc-based coating - Part 1: Metallic zinc with finishing layer
ISO 8179-1-2017
Technical specification for stainless steel - Austenitic / ferrite welded by electro fusion by filling metal
ASTM A928-2014
Specifications of cast iron pipes and connections used for sewage drainage
ASTM A74-2021
Iron ductile pipes with connections and fittings for water applications
GSO ISO 2531-2013
Pipes and fittings for sanitary purposes of cast iron for waste water and ventilation
SASO 827-1994
Ductile iron pipes and fittings for pressure and non-pressure pipelines - Cement mortar lining
GSO ISO 4179-2005
Technical specification for stainless steel pipes - Welded and seamless austenitic / ferritic
ASTM A790M-2020
Standard Specification for Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Nipples
ASTM A733-2016
Technical specification for stainless steel chrome - nickel austenitic pipes welded with electric fusion for using at high temperatures and
general applications
ASTM A358-2019
Threaded Steel
SASO 859-1994
Standard Specification for Hub less Cast-Iron Soil Pipe and Fittings for Sanitary and Storm
ASTM A888-2021
Drain, Waste, and Vent Piping Applications
Cast iron drainage pipes and fittings - Spigot series
ISO 6594-2006
Specifications of Welded and seamless pipes - Cold-hardened austenitic stainless steel
ASTM A312M-2021
Standard specifications for black steel pipes Zinc-coated
ASTM A53/A53M-2020
hot-dipped welded and seamless
Standard Specification for Copper-Brazed Steel Tubing
ASTM A254M/A254-2019
Standard Specification for Factory-Made Wrought Nickel and Nickel Alloy Fittings
ASTM B366-2020
Standard Specification for Forged or Rolled Alloy and Stainless-Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature
ASTM A182-2021
Standard Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission Service
ASTM A694-2016
Standard Specification for Factory-Made Wrought Aluminium and Aluminium-Alloy Welding Fittings
ASTM B 361-2016
Standard Specification for Gray Iron Castings for Valves, Flanges, and Pipe Fittings
ASTM A126-2019
Standard Specification for Ferritic Ductile Iron Pressure-
ASTM A395-2018
Retaining Castings for Use at Elevated Temperatures
Standard Specification for Cupola Malleable Iron
ASTM A197-2019
Standard Specification for Copper Alloy Sand Castings for General Applications
ASTM B584-14-2014
Standard specification for carbon steel seamless pipes used under high temperatures.
ASTM A106-2019
Materials, Articles and Surfaces in Contact with Food
Cutlery and table holloware: Part 1: Requirements for cutlery for the preparation of food
SASO SALEEM Scheme (Type 3 assessment as per ISO 17067:2013
ISO 8442-1:1997-2016
Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 3: Requirements for silverplated table and decorative holloware.
ISO 8442-3:1997-2017
Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 6: Requirements for light silver-plated tableware covered
ISO 8442-6:2000-2000
Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 8:
ISO 8442-8:2000-2000
Requirements for silverplated tableware.
Cutlery and table holloware - Part 2: Requirements for stainless steel and silver-plated cutlery.
ISO 8442-2:1997-1997
Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 5: Specification for sharpness and edge retention test of
SASO GSO ISO 8442-5-2016
Cutlery and table holloware: Part 1: Requirements for cutlery for the preparation of food.
ISO 8442-1:1997-2016
Aluminium and Aluminium Alloys - Foil - Part 1 Technical conditions for inspection and delivery.
SASO GSO EN 546-1-2011
Aluminium and Aluminium Alloys - Foil - Part 2: Mechanical Properties.
SASO GSO EN 546-2-2011
Aluminium and Aluminium Alloys - Foil - Part 3 Tolerances on dimensions.
SASO GSO EN 546-3-2011
Aluminium and Aluminium Alloys - Foil - Part 4 Special Property Requirements.
SASO GSO EN 546-4-2011
Domestic cookware coating materials
GSO 2014-2010
Cold-Formed Aluminium Household Utensils
GSO 1008:1998-1998
Aluminium and Aluminium alloys - castings - chemical composition of castings for use in contact with food
EN 601-2004
Aluminium and aluminium alloys. Wrought products. Chemical composition of semi-finished products used for the fabrication of articles
EN 602-2004
Domestic Pressure Cookers
SASO 173-
metals and alloys used in food contact materials and articles
Council of Europe Resolution CM/Res(2013)9-2013
18 Machinery and equipment
Machinery Safety of machinery - Electrical equipment of machines - Part 1: General requirements
SASO SALEEM Scheme (Type 1a assessment as per ISO 17067:2013
IEC 60204-1-2021
safety of machinery - electrical equipment of machines - part 11: requirements for HV equipment for voltages above 1 000 v a.c. or 1 500 v d.c.
IEC 60204-11-2018
Safety of machinery - Electrical equipment of machines - Part
IEC 60204-32-2008
32: Requirements for hoisting machines
Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals
IEC 61310-1-2007
Arc welding equipment - Part 1: Welding power sources
IEC 60974-1-2021
Hand-held motor-operated electric tools - Safety - Part 2-15: Particular requirements for hedge trimmers
IEC 60745-2-15-2009
19Electrical and optical equipment
Machinery
Household and similar electrical appliances - Safety - Part 2-64:
SASO SALEEM Scheme (Type 1a assessment as per ISO 17067:2013
SASO/GSO/IEC 60335-2-64-2014
Particular requirements for commercial electric kitchen machines
Household and similar electrical appliances - Safety - Part 2-75: Particular requirements for commercial dispensing appliances and vending
machines
SASO/GSO/IEC 60335-2-75-2020
Household and similar electrical appliances - Safety - Part 2-90: Particular requirements for commercial microwave ovens
SASO/GSO/IEC 60335-2-90-2020
Household and similar electrical appliances - Safety - Part 2-100: Particular requirements for hand-held mains-operated garden blowers,
vacuums and blower vacuums
SASO/GSO/IEC 60335-2-100-2007
Hand-held motor-operated electric tools - Safety - Part 1: General requirements
IEC-60745-1-2006
Hand-held motor-operated electric tools - Safety - Part 2-1: Particular requirements for drills and impact drills
IEC-60745-2-1-2008
Hand-held motor-operated electric tools - Safety - Part 2-2: Particular requirements for
IEC 60745-2-2-2008
screwdrivers and impact wrenches
Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for grinders, polishers and disk-type sanders
IEC 60745-2-3-2012
Hand-held motor-operated electric tools - Safety - Part 2-4: Particular requirements for sanders and polishers other than disk type
IEC 60745-2-4-2008
Hand-held motor-operated electric tools - Safety - Part 2-5: Particular requirements for circular saws
IEC 60745-2-5-2010
Hand-held motor-operated electric tools - Safety - Part 2-6: Particular requirements for hammers
IEC 60745-2-6-2008
Safety of hand-held motor-operated electric tools. Part 2-7: Particular requirements for spray guns for non-flammable liquids
IEC 60745-2-7-1989
Hand-held motor operated electric tools- Safety - Part 2-8: Particular requirements for shears and nibblers
IEC 60745-2-8-2008
Hand-held motor-operated electric tools- Safety- Part 2-9: Particular requirements for tappers
IEC 60745-2-9-2008
Hand-held motor-operated electric tools - Safety - Part 2-11: Particular requirements for reciprocating saws (jig and saber saws)
IEC 60745-2-11-2008
Safety of hand-held motor operated electric tools Part 2-
IEC 60745-2-12-2008
12: Particular requirements for concrete vibrators
Safety of hand-held motor operated electric tools Part 2-13: Particular requirements for chain saws
IEC 60745-2-13-2009
Hand-held motor-operated electric tools - Safety - Part 2-14: Particular requirements for planers
IEC 60745-2-14-2010
Hand-held motor-operated electric tools - Safety - Part 2-17: Particular requirements for routers and trimmers
IEC 60745-2-17-2010
Hand-held motor-operated electric tools - Safety - Part 2-20: Particular requirements for band saws
IEC 60745-2-20-2008
Hand-held motor-operated electric tools - Safety - Part 2-22: Particular requirements for cut-off machines
IEC 60745-2-22-2011
Electrical BatteriesPrimary batteries - Part 1: General
SASO SALEEM Scheme (Type 3 assessment as per ISO 17067:2013)
IEC 60086-1-2021
Primary batteries - Part 2: Physical and electrical specifications
IEC 60086-2-2021
Primary batteries - Part 3: Watch batteries
IEC 60086-3-2021
Primary batteries - Part 4: Safety of lithium batteries
IEC 60086-4-2019
Primary batteries - Part 5: Safety of batteries with aqueous electrolyte
IEC 60086-5-2021
Secondary cells and batteries containing alkaline or other non-acid electrolytes - sealed nickel-cadmium prismatic rechargeable single cells
IEC 60622-2002
Secondary cells and batteries containing alkaline or other non-acid electrolytes - vented
IEC 60623-2017
nickel-cadmium prismatic rechargeable single cells
General purpose lead-acid batteries (valve-regulated types) - Part 1: General requirements, functional characteristics - Methods of test
IEC 61056-1-2012
General purpose lead-acid batteries (valve-regulated types) - Part 2: Dimensions, terminals and marking
IEC 61056-2-2012
Secondary cells and batteries containing alkaline or other non-acid electrolytes - portable
IEC 61951-1-2017
sealed rechargeable single cells - Part 1: Nickel-cadmium
Secondary cells and batteries containing alkaline or other non-acid electrolytes - Portable sealed rechargeable single cells - Part 2: Nickel-metal hydride
IEC 61951-2-2017
Secondary cells and batteries containing alkaline or other non-acid electrolytes - secondary lithium cells and batteries for portable applications -
IEC-61960-3-2017
Secondary batteries for the propulsion of electric road
SASO-IEC-61982-2012
vehicles - Performance and endurance tests
Secondary batteries (except lithium) for the propulsion of electric road vehicles - Part 4: Safety requirements of nickel-metal hydride cells and modules
SASO-IEC-61982-4-2018
Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary cells, and for batteries made from them, for
IEC 62133-1-2017
IEC 62259-2003
use in portable applications - Part 1: Nickel systems
Secondary cells and batteries containing alkaline or other non-acid electrolytes - Nickel-cadmium prismatic secondary single cells with partial gas recombination
Battery-electric mopeds and motorcycles - Performance - Part 1: Reference energy consumption and range
ISO 13064-1-2012
Battery-electric mopeds and motorcycles - Performance -
ISO 13064-2-2012
Part 2: Road operating characteristics
Lead-acid starter batteries - Part 4: Dimensions of batteries for heavy vehicles
IEC 60095-4-2021
Lead-acid starter batteries- Part 1: General requirements and methods of test
SASO-IEC-60095-1-2019
Lead-acid traction batteries - Part 2: Dimensions of cells and terminals and marking of polarity on cells
IEC 60254-2-2008
Lead-acid traction batteries - Part 1: General requirements and methods of tests
IEC 60254-1-2005
Stationary lead-acid batteries - Part 11: Vented types - General requirements and methods of tests
IEC 60896-11-2002
Stationary lead-acid batteries - Part 21: Valve regulated types - Methods of test
