IAF Scope 17a Basic metals

Steel Pipes

Stage-wise / Finished product inspection

API 5L: 46th Updated on 2020

Specification for Line Pipe

IS 1239 (Part 1)/ 1/ Jan 2019

Steel Tubes, Pipes and Fittings

IS 1239(Pt 2):2011

Steel Tubes, Pipes and Fittings

IS 3589/ 1/ May 2020

Steel Pipes for Water & Sewage (168.3 to 2540mm OD) specifications.                                                                                       All ASME/ASTM- Specification for seamless / welded / ERW pipes All IS- Indian Standard for Welded and ERW pipes.           OR any equivalent standards
( All the above standards with latest amendments)

IS 4923/ 1/ April 2019

Hollow steel sections for structural use

IS 1732:1989

Steel bars, round, and square for structural and general engineering purposes dimensions

ASME IX-2015/PD 190

Welding, Brazing, and Fusing Qualifications

API 5L: 46th Updated in 2020

Specification Line Pipe

Pipe Fittings

Stage wise / Finished product Inspection/ Vendor Assessment / Inspection of Lot

ASTM A 234/A 234M:2019

Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service

ASTM A 182/A 182M:2021

Specification for Forged or Rolled Alloy-Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service

EN 877:1999

Specification for Cast Iron Pipes and fittings

ASTM A 420/A 420M:2020

Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service

ASTM A 403/A 403M:2020

Specification for Wrought Austenitic Stainless Steel Piping Fittings

Tubes

Stage wise / Finished product Inspection/ Vendor Assessment / Inspection of Lot

ASTM A 178/A 178M:2019

Specification for Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler and Superheater Tubes

ASTM A 179/A 179M:2019

Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes

Castings

Stage wise / Finished product Inspection / Vendor Assessment / Inspection of Lot

IS 1030:1998

Carbon steel castings for general engineering purposes - specification

IS 2644:1994

High strength steel castings for general engineering and structural purposes-specification

Forgings

Stage wise / Finished product Inspection / Vendor Assessment / Inspection of Lot

IS 2004:1991

Carbon steel forgings for general engineering purposes-specification

ASTM A 788/A 788Ma:2019

Standard Specification for Steel Forgings, General Requirement

ASTM A 336/A 336M:2021

Alloy Steel Forgings for Pressure and High-Temperature Parts

ASTM A 473:2021

Standard Specification for Stainless Steel Forgings

IAF Scope 17b Fabricated metal products

Storage Tanks

Stage wise / Finished product Inspection / Vendor Assessment

IS 803:1976

Code of practice for design, fabrication, and erection of vertical mild steel cylindrical welded oil storage tanks

IS 10987:1992

Code of fabrication, Practice for design, testing and installation, of under-ground/above-ground horizontal cylindrical steel storage tanks for petroleum products

API STD 620:2013+ADD3:2021

Design and Construction of Large, Welded, Low-Pressure Storage Tanks

API STD 650:2020+ERR 1:2021

Welded tanks for oil storage

ASME BPVC Section 8 Division 1:2021; ASME BPVC.VIII.1:2021

Rules for construction of pressure vessels

ASME Sec II, 2011-2016 (A, B,C,D)

Materials & Specifications

API STD 650:2021-01

Welded Tanks for Oil Storage

Fasteners, screw machine products

Stage wise / Finished product Inspection / Vendor Assessment

ASTM A 193/A 193M:2020

Standard Specification for Alloy-Steel and Stainless-Steel Bolting for High Temperature or High-Pressure Service and Other Special Purpose Applications Service and Other Special Purpose Applications

ASTM A 194/A 194Ma:2020

Standard Specification for Carbon Steel, Alloy Steel, and Stainless-Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both

 IS 1364-1 (2002)

Hexagon Head Bolts, Screws and Nuts of Product Grades A and B, Part 1: Hexagon Head Bolts (Size Range M 1.6 to M 64)

IS 1367-3 (2002)

Technical Supply Conditions for Threaded Steel Fasteners, Part 3: Mechanical Properties of Fasteners Made of Carbon Steel and Alloy Steel - Bolts, Screws and Studs

IS 12427:2001

Fasteners – threaded steel fasteners – hexagon head transmission tower bolts

IS 4503, 1967 Reaffirmed 2013

Shell and Tube Type Heat Exchangers

ASME PV CODE 8 DIV 1: 2021

Rules for Construction of Pressure Vessels

ASME Section V, 2017

Non-destructive Examination

ASME BPVC Section 9:2021; ASME BPVC.IX:2021

Welding, Brazing, and Fusing Qualifications

Pipes [Ductile, Cast Iron, Carbon Steel, Ferrous, nonferrous, alloy steel, Seamless & Welded (without or with addition of filler wire)

Stage wise / Finished product Inspection / Vendor Assessment / Inspection of Lot

IS 8329: 2000 AMD 3 2014

Centrifugally cast (spun) ductile iron pressure pipes for water, gas and sewage - specification

IS 3589: 2001 AMD 4 2010

Steel pipes for water and sewage

ASTM A 53/A 53M:2020

Seamless and Welded Standard Steel Pipe

API 5L:2018

Specification for line pipe

ISO 2531:2009

Ductile iron pipes, fittings, accessories, and their joints for water applications

ASTM A 716: 2018

Standard Specification for Ductile Iron Culvert Pipe

ASTM A 74:2021

Standard Specification for Cast Iron Soil Pipe and Fittings

ASTM A 746:2018

Standard Specification for Ductile Iron Gravity Sewer Pipe

OR any equivalent standards

/other applicable National / International Specifications / Standards / Client specific requirements / Internal Procedures

IAF Scope 18 Machine and Equipment

Valves

Stage-wise / Finished product inspection

IS 9890: 1981(R2003)

Specification for general purpose ball valves

AS 5612:2013

Butterfly valve general purpose

API STD 609:2021

Butterfly Valves: Double-flanged, Lug- and Wafer-type, and Butt-welding Ends

API598, rev10,2016

Valve Inspection and Testing

API STD 526:2018-09

Flanged Steel Pressure-Relief Valves

API 6D, rev24, 2014

Specification for Pipeline and Piping Valves

API STD 600:2021-05

Steel Gate Valves−Flanged and Butt−Welding Ends, Bolted Bonnets

OR any equivalent standards/other applicable National / International Specifications / Standards / Client specific requirements / Internal Procedures

IAF scope 19 Electrical Equipment

Motors

Stage-wise / Finished product inspection

IS 12615: 2018

Line Operated Three Phase AC Motors (IE CODE )

IEC 60034-2-1/2014

Rotating electrical machines - Part 2-1: Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles)

IS 7538/1996(R2016)

Three-phase squirrel cage induction motors for centrifugal pumps for agricultural applications OR any equivalent standards
( All the above standards with latest amendments) Other applicable National / International Specifications / Standards / Client specific requirements / Internal Procedures

AC generators

Stagewise / Finished product inspection

IS 13364-1/ 1992, Reaffirmed 2013

AC Generators driven by reciprocating internal combustion engines-specification
Part 1: Alternators rated upto 20 KVA

IS 13364-2/ 1992, Reaffirmed 2013

Ac generators driven by reciprocating internal combustion engines - Specification: Part 2 alternators rated above 20 kVa and up to 1250 kVa

IS. EN 60034-1:2010

Rotating Electrical Machines
Part 1: Rating and Performance

IEC Pub 60341-1/1970

Push-button switches - Part 1: General requirements and measuring methods

EN ISO 8528-13:2017-03

Reciprocating Internal Combustion
Engine Driven Alternating Current
Generating Sets                                                                                        OR any equivalent standards
( All the above standards with latest amendments) Other applicable National / International Specifications / Standards / Client specific requirements / Internal Procedures

Power Transformer

Stagewise / Finished product inspection

IS 2026 (Part 1):2012

Part1: General

IS 2026 (Part 2): 2010 Reaffirmed 2015

Part 2: Temperature Rise

IS 2026 (Part 3): 2009

Part 3: Insulation levels, dielectric tests, and external clearances in air

IS 2026 (Part 4):1977 Reaffirmed 2016

Part 4: Terminal markings, tapings and connections

IS 2026 (Part 5): 2011 Reaffirmed 2016

Part 5: Ability to withstand short circuit

IEC 60076-1:2011

Part1: General

EN 60076-2:2013-04-30

Part 2: Temperature rise for liquid-immersed transformers

IEC 60076-3:2013

Part 3: Insulation levels, dielectric tests, and external clearances in air

IEC 60076-4:2002

Part 4: Guide to the lightning impulse and switching impulse testing - Power transformers

IEC 60076-5:2006

Part 5: Ability to withstand short circuit

IS 3156 Part 1 to 4: 2007

Voltage Transformers

IS 1180: Part 1 : 2014

Outdoor Type Oil Immersed Distribution Transformers Upto and Including 2 500 kVA, 33kV - Specification Part 1 Mineral Oil Immersed (Fourth Revision)

IS 11171 rev1: 1985, Reaffirmed 2016

Specification for Dry Type Power Transformers.                          OR any equivalent standards
(All the above standards with latest amendments) Other applicable National / International Specifications / Standards / Client specific requirements / Internal Procedures.

Instrument transformer

Stagewise / Finished product inspection

IS:2705 (Part 1):1992

Current Transformers -Specification

Part 1: General Requirements

IS:2705 (Part 2):1992

Current Transformers -Specification

Part 2: Measuring Current Transformers

IS:2705 (Part 3):1992

Current Transformers -Specification

Part 3: Protective Current Transformers

IS:2705 (Part 4):1992

Current Transformers -Specification

Part 4: Protective Current Transformers for special purpose applications

IEC: 61869-2:2012

Instrument transformers - Part 2: Additional requirements for current transformers

IS: 3156 (Part 1) :1992

Voltage Transformers -Specification

Part 1: General Requirements

IS: 3156 (Part 2) :1992

Voltage Transformers -Specification

Part 2: Measuring Voltage Transformers

IS: 3156 (Part 3) :1992

Voltage Transformers -Specification

Part 3: Protective Voltage Transformers

IS: 3156 (Part 4) :1992

Voltage Transformers -Specification

Part 4: Capacitor Voltage Transformers

IEC: 61869-3:2021

Instrument transformers - Part 3: Additional requirements for inductive voltage transformers.                                                        OR any equivalent standards

( All the above standards with latest amendments) Other applicable National / International Specifications / Standards / Client specific requirements / Internal Procedures

Wires and cable

Stagewise / Finished product inspection

IS 694 Rev4:2010, Reaffirmed 2015

Polyvinyl Chloride Insulated Unsheathed--And Sheathed Cables/ cords With Rigid And--Flexible Conductor for Rated Voltages--Up To And Including 1100 V

IS 1554, Part1 (rev3), Part2 (rev2): 1988, Reaffirmed 2015

PVC insulated (heavy duty) electric cables

IS 5831Rev1:1984, Reaffirmed 2016

PVC insulation and sheath of electric cables

IS 7098,

Crosslinked polyethylene insulated PVC sheathed cables

Part1 Rev1:1988, Reaffirmed 2015

For working voltage upto and including 1 100 V

Part2 Rev2:2011, Reaffirmed 2016

For Working Voltages from 3.3 kV up to and Including 33 kV

Part3:1993, Reaffirmed 2014

For working voltages from 66 kV upto and including 220 kV

IS 8130Rev2:2013

Conductors for Insulated Electric Cables and Flexible Cords

IS 10810:1984, Reaffirmed 2016

Methods of test for cables

IS 13573Rev1: 2011, Reaffirmed 2016 and ENA09-13 Issue2:2013

Cable jointing kits & Accessories for Extruded Power Cables

ACSR Conductors

Stagewise / Finished product inspection

IS: 398 Part 1:1996

ACSR Conductors for overhead transmission purposes               Part 1: Aluminum stranded conductors

IS: 398 Part 2:1996

ACSR Conductors for overhead transmission purposes

Part 2: Aluminum conductors galvanized steel rein-forced

IS: 398 Part 3:1976 (R1991)

Part 3: Aluminium conductors, aluminized steel reinforced

IS: 398 Part 4:1994 (R2014)

Part 4: Aluminium alloy stranded conductors (Aluminum magnesium silicon type)

IS: 398 Part 5:1992 (R2002)

Part 5: Aluminium conductors - galvanized steel reinforced for extra high voltage (400 kV and above)

IEC 60888:2019

Zinc-coated steel wires for stranded conductors

IEC 61089:1997

Amendment 1 - Round wire concentric lay overhead electrical stranded conductors.                                                                          OR any equivalent standards

( All the above standards with latest amendments) other applicable National / International Specifications / Standards / Client specific requirements / Internal Procedures

HV Switchgear and control gear

Stagewise / Finished product inspection

IS 12729:2004

Common Specification for High Voltage Switchgear and control gear standards

IEC 62271.1:2017, Amd 2021

High-voltage switchgear and control gear Common specifications for alternating current switchgear and control gear

IEC 60694:2006

Common Specification for High Voltage Switchgear and control gear standards OR any equivalent standards
( All the above standards with latest amendments) Other applicable National / International Specifications / Standards / Client specific requirements / Internal Procedures.

LV switchgear and control gear

Stagewise / Finished product inspection

IS 13947 (Part 1 ): 2004

Specification For Low-Voltage Switchgear and Control gear - Part 1: General Rules

IEC 60947-1:2007

Specification For Low-Voltage Switchgear and Control gear - Part 1: General Rules OR any equivalent standards

( All the above standards with latest amendments) Other applicable National / International Specifications / Standards / Client specific requirements / Internal Procedures

Electrical switching circuits / boards Distribution Control panels

Stagewise / Finished product inspection

IS 8623:1993, Reaffirmed 2018

IS 8623, 1993, Reaffirmed 2018

IS 13703:1993, Reaffirmed 2014

Low-voltage fuses for voltages not exceeding 1 000 V AC or 1 500 V DC

IS 12021 Rev1: 2015

Control Transformers for Switchgear and Control gear for Voltages Not Exceeding 1000 V A.C. – Specification

IS 9124:1979, Reaffirmed 2016

Guide for maintenance and field testing of electrical relays

IS 8686:1977, Reaffirmed 2016

Static protective relays

IS 7372Rev1:1995, Reaffirmed 2017

Lead-acid storage batteries for motor vehicles

IS 1651Rev4:2013

Stationary cells and batteries, lead-acid type (with tubular positive plates)

IS 1652 Rev4:2013

Stationary Cells and Batteries, Lead-Acid Type with Plante Positive Plates

IS 6304Rev2:1992, Reaffirmed 2017

Stationary batteries lead-acid type with pasted positive plates

IS 8320Rev2:2000, Reaffirmed 2015

General Requirements and Methods of Tests for Lead-acid Storage Batteries

Switches

Stagewise / Finished product inspection

IS 9920:1985

Alternating current switches for voltage above 1000V

Batteries

Stagewise / Finished product inspection

BIS IS 10918:1984 AMD 2 2013

Specification for vented type nickel cadmium batteries

IS 15549:2005 Reaffirmed 2015

Stationary Valve Regulated Lead Acid Batteries

IEC 60896:2004 & IS 13369:1992

Stationary lead-acid batteries

IS1646:1997

Code of practice for fire safety of buildings (General) 

OR any equivalent standards

/other applicable National / International Specifications / Standards / Client specific requirements / Internal Procedures

Plot 5B, Sector 15A, First Floor, Crown Plaza Mall, Faridabad - 121007, Haryana, India