IAF 17a Basic metals Ferrous & Non Ferrous
Forging
Stage & Final inspection including witness Mechanical test, NDE
ASME SA 105:2019
ASME SA 350:2019
ASME SA 182:2019
BS EN 10250:2000
BS 970:1991
BS 4670:1971
Specification for carbon steel Forgings for piping application
Specification for carbon and low alloy steel forgings, requiring notch toughness testing for piping components
Specification for forged or rolled alloy and stainless steel pipe flanges, forged fittings, and valves and parts for high-temperature service
Open die steel forgings for general engineering purpose
Specification for wrought steel and mechanical and allied engineering purpose
Specification for alloy steel forgings
Castings
Stage & Final inspection including
witness Mechanical tests, NDE
ASME SA 216:2019
ASME SA 217:2019
ASME SA 352:2019
BS 3100:1991
BS EN 10293:2005
Specification for Steel Castings, carbon, suitable for fusion welding for high temperature service
Specification for steel castings, martensitic stainless and alloy, for pressure-containing parts,
suitable for high-temperature service
Specification for steel castings, ferritic and martensitic, for pressure containing parts, suitable for low temperature service.
Steel castings for general engineering purpose
Steel castings for general engineering uses
Tubing (Ferrous)
Final inspection including witness
Mechanical tests, NDE
ASME SA 106:2019
ASME SA 179:2019
ASME SA 213:2019
BS EN 10217:2014
Specification for seamless carbon steel pipe for high temperature service.
Specification for seamless cold drawn low carbon steel heat exchanger and condenser tubes
Specification for seamless ferritic and austenitic alloy steel boiler, super heater, and heat exchanger tubes.
Welded steel tubes for pressure purpose.
Tubing (Non Ferrous)
Final inspection including witness
Mechanical tests, NDE
SB-111:2019
BS 2871:1972
Specification for Copper and Copper alloy seamless condenser tubes and ferrule stock
Specification for copper and copper alloy, tubes for general purpose.
Plate
final inspection including Witnessing
Mechanical tests and Non Destructive examination
BS EN 10051:2010
ASME SA 516:2019
ASME SA 515:2019
ASME SA 285:2019
ASME SA 387:2015
IS 2041:2009
Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels. Tolerances on dimensions and shape
Specification for pressure vessel plates, carbon steel, for moderate and lower temperature service
Specification for pressure vessel plates, carbon steel, for intermediate and higher temperature service.
Specification for pressure vessel plates, carbon steel, low alloy and intermediate tensile strength
Specification for pressure vessel plates, alloy steel, chromium molybdenum
Steel Plate for Pressure Vessel used at moderate and low temperature.
Fasteners (Carbon
Steel/ Alloy Steel)
Stage and Final inspection including
witness Mechanical tests NDE
ASME SA 193:2019
ASME SA 194:2019
ASME SA 320:2019
Specification for alloy steel and stainless steel bolting materials for high temperature or high pressure service and other special purpose applications.
Specification for carbon and alloy steel nuts for bolts for high pressure or high temperature service or both.
Specification for alloy steel and stainless steel bolting for low temperature service.
Fittings (Seamless)
Stage and Final inspection including witness Mechanical tests, NDE
ASME SA 234:2019 Various Grades
Spec for pipe fittings of wrought carbon steel and alloy steel for moderate and high temperature service
IAF Scope 17b
Fabricated Metal Products Pressure Vessel, Heat Exchanger
Stage & Final inspection including appraisal of Manufacturing Drawings submitted by manufacture, Witness
qualification of Weld Procedure/ Welder
ASME Code Sec VIII Div-1, Div-2, 2019 Edition
IS 2825 :1969
ASME Code Sec. IX, Sec. V 2019
PD5500-2019
ASME Boiler and Pressure Vessel Code (Rules for construction of pressure vessel)
Code for Unfired Pressure Vessel
ASME Boiler and Pressure Vessel Code
Specification for unfired fusion welded pressure vessel
Boiler and Boiler
Components
Stage & Final inspection including appraisal of Manufacturing Drawings submitted by manufacture, Witness
qualification of Weld Procedure/ Welder
ASME Code Sec. 1
ASME Boiler and Pressure Vessel Code (Welding, brazing and fusion qualification)
Boiler Plant External
Piping
Stage & Final inspection including appraisal of Manufacturing Drawings submitted by manufacture, Witness
qualification of Weld Procedure/ Welder
ANSI B31.1:2019,
ASME Code Sec. IX, Sec. V
2019
ASME Code for pressure piping, B31
ASME Boiler and Pressure Vessel Code (Welding, brazing and fusion qualification)
Tanks
Stage & Final inspection including appraisal of Manufacturing Drawings submitted by manufacture, Witness
qualification of Weld Procedure/ Welder
API 650 (2013)
API 620(2013)
Welded tanks for oil storage
Design and construction of large, welded, low pressure storage tanks
Transportable
Pressure Containers
Stage and Final inspection including appraisal of manufacturing Drawings submitted by manufacturer Witness qualification of WPS/PQR/WPQ
ASME Code Sec VIII Div 1(2019),
ASME Boiler and Pressure Vessel Code (Rules for construction of pressure vessel)
BS 1500:1965 with Head to Shell joint as per British Home office Rules (BHOR),
BS5045:2000
Spec for Fusion welded pressure vessels for general purpose- Aluminum
Transportable gas container, specification for steel containers of 0.5L up to 450 L water capacity with welded seams
Formed Components (dish ends fabricated nozzles)
Final inspection including witness
Mechanical tests NDE
ASME Code Sec VIII Div 1 and Div 2 2019
ASME Boiler and Pressure Vessel Code (Rules for construction of pressure vessel)
Fittings (Seamless and Welded)
Stage & Final inspection including witness Mechanical tests NDE
ASME SA 234:2019
BS EN 10028:2009
ASME SA 672:2019
Spec for pipe fittings of wrought carbon steel and alloy steel for moderate and high temperature service
Flat products made of steel for pressure purpose.
Specification for electric fusion welded steel pip for high pressure service at moderate temperature
Structural Fabrication
Stage & Final inspection of Structures including fabricated steel Sub Station Structures and witness Mechanical tests, Non Destructive examination
As per AWS D1.1 Code:2015 edition and Client requirements as per QAP.
Structural welding Code-steel.
Drill Pipe
Final inspection including witness tests
API 5DP(2009)
Spec for drill pipes
Metallic Hose assemblies
Final inspection including witness tests
BS 4089:1999
Specification for metallic hose assemblies for liquid petroleum gases and liquefied natural gases
IAF Scope 18
Machinery & Equipment
Compressor
Stage & Final inspection including witness tests
API-618(2007), Client Specification
Reciprocating compressors for the refining, petroleum and industrial gas industries
Crane
Stage & Final inspection including witness tests
BS 2573:1983,
IS 3177 (1999)
SRules for the design of cranes; specification for classification, stress calculations and design criteria for structures
Code for practice for electric overhead travelling cranes and gantry cranes other than steel work cranes
Pumps (Centrifugal
Horizontal, Vertical) and other
Stage & Final inspection including witness tests
IS 6595 (Part 2)
API 610-11th edition
Centrifugal Pump for Petroleum, Petrochemical and Natural Gas Industries
Gear Box
Final inspection including witness tests
AGMA 6011-J14
Specification for High Speed Helical Gear Units
Wire Ropes
Final inspection including witness tests
API 9A:2011
Spec for wire ropes
IS 2266:2002
Steel wire ropes for general engineering purpose
Turbine Generating sets - Hydro/ Steam Turbine up to 500MW
Stage & Final inspection including
witness NDE Tests, Performance tests
API 611:2008
API 612:2014
ISO19859:2016
ASME PTC 6:2004
ASME PTC 22:2014
PTC 18:2011
General purpose steam turbine for petroleum, chemical, and gas industry services
Petroleum, petrochemical, and natural gas industries-steam turbines-special purpose applications
Gas turbine applications-requirements for power generation
ASME Code for Steam turbine-rules for conducting and reporting testing
ASME Code for Gas turbine
ASME Code for hydraulic turbine and pump turbine
Valves (Ferrous I Non
Ferrous) Gate, Globe, Sluice, Check Valve,
Final inspection
BS EN 15761:2002
API 602(2015),
API 603(2013)
BS EN 10434:2004
API 598(2016)
API 600(2015)
Specification for Steel gate, Globe and Check valves
Steel gate, globe and check valve, for petroleum and natural gas industries
Gate, globe, and check valves for sizes DN100 (NPS4) and smaller for the petroleum and natural gas industries.
Corrosion-resistant, bolted bonnet gate valves-flanged and butt welding ends
Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries
Valve inspection
Steel gate valves-flanged and butt welding ends, bolted bonnets
IAF Scope 19a
Generator
Stage and Final inspection including witness tests
IS 4722:2001
IEC 60034
Rotating Electrical Machines
Spec for Rotating Electrical machines/ standard on efficiency class
Motors
Stage and Final inspection including Witness tests
IS 325:1996
IEC 60034
Specification for three phase induction motors
Spec for 3 phase induction motor/ efficiency class
Transformers
Stage and Final inspection including witness tests
IEC 60076-1:2011
IS 11171:1985,
IS 2026:2011
IEC 60726:1982
IEC 60296: 2003
IEC 60044 part 1, 2, 5, 6
IEC 61869-1:2007
IEC 61869-2:2012
IEC 61869-3:2011
IEC 61869-5:2011
IEC 61869-6:2016
Power Transformers General
Specification for Dry type power transformers
Power transfomers
Dry Type power transformers
Fluids for electrotechnical applications-Unused mineral insulating oils for transformers
Additional requirements for current transformers
Instrument transformers - Part 1: General requirements
Instrument transformers - Part 2: Additional requirements for current transformers
Instrument transformers - Part 3: Additional requirements for inductive voltage transformers
Instrument transformers - Part 5: Additional requirements for capacitor voltage transformers
Instrument transformers - Part 6: Additional general requirements for low-power instrument transformers
Client requirements as per approved QAP, LR Technical Procedure, which are based on National and International Codes and standards.
Control Switchgears/ Instrument Panels
Final inspection including witness tests
IS 13947:2004,
IEC61850
IEC 60079-1:2014 and various parts
Fusible plug for dissolved acetylene gas cylinder - Specification
Communication networks and systems for power utility automation
Electrical apparatus for explosive gas atmospheres- flameproof enclosures "d"
Bus duct
Final inspection including witness tests
IEC, IS, ANSI specifications C37.04, C37.06. and C37.20 & tested in accordance with C37.09 and C37.20
Spec for Circuit breakers/ switchgear assemblies including metal bus duct.
Cables
Final inspection including witness tests
IS 1554:1998
IS 7098:1985
IEC 60502
IEC 62067:2011
PVC Insulated Power Cables
Crosslinked Polyethylene Insulated Thermoplastic sheathed cables
Power cables with extruded insulation and their accessories for rated voltages from 1 kV up to 30 kV kV) - ALL PARTS
Power cables with extruded insulation and their accessories for rated voltages above 150 KB
Battery Charger
Final inspection including witness tests
IEC60335-2-29
Household and similar electrical appliances - Safety - Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances
Battery
Final inspection including witness tests
IS 1652:1991
Specification for stationary cells and Lead acid batteries with plante positive plates
Circuit Breakers
Stage and Final inspection including witness tests
IEC 62271-100
BS EN 60623:2017
IS 10918 -2013
High Voltage switchgear and control gear: alternating-current circuit breakers
Secondary cells and batteries containing alkaline or other non-acid electrolytes. Vented nickel-cadmium prismatic rechargeable single cells
Specification for Vented type Nickel Cadmium Batteries
Power Distribution Board
Stage and Final inspection including witness tests
Client requirements as per QAP, LR Technical Procedure which are based on National and International Codes and Standards
IAF Scope 22
Other Transport Equipment Flat Bottom Rail, Head Hardened Rail,
Inspection of Railway Rails during manufacturing and Certification.
Independent Technical Mill Assessment, Capacity Verification & Product Certification for Manufacturing Process for Railway Track Rails
Research Designs and Standards Organisation (RDSO)
IRS T-12-2009
Indian Railway Standard Specification for Flat Bottom Railway Rails.
Rolling stock-Railway wagon
Inspection during fabrication and testing
RDSO standards
G-72
G-105
General Standard Specification for Fabrication of wagon underframes & bodies
Standards of Infrastructure, Manufacturing, Testing and Quality Assurance Systems to qualify as Railway Wagon Builder
The following offices of LRQA Inspection Services India LLP
S.No
Location
Address
Key activities performed
01
Main office
63-64, Kalpataru Square, 6th Floor, Kondivita lane, Off Andheri-Kurla Road, Andheri (East), Mumbai 400059, India
Top management functions, quality management system functions, administration & accounts, other key activities as applicable to main office.
